FYSETC Portable Input Shaper mount for Bear Extruder and Bed. ADXL345 + RP2040
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a way to mount a FYSETC Portable Input Shaper on a Prusa MK3s Bear extruder and bed.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 733
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Mount for a FYSETC Portable Input Shaper on a Prusa MK3s Bear extruder (BearExxa) and bed.
It should fit an MK2 or MK3 just fine, the extruder mount is very simple.
You will need to pause the print a dozen or so layers in to add the magnets into the holes that will encase them.
On the extruder, it replaces the fan duct/shroud.
On the bed, the mount has 2 magnets that secure it to the bed.
Requirements:
Two 10x2mm round magnets
Two M3*8 screws
One M3*10 screw to secure to extruder (you can use the fan shroud screw temporarily for this.)
EXTRA:
I added an older version too, which requires clamps instead of magnets.
Requirements:
Two adjustable glass bed clamps, instead of magnets.