1 / 4
Fysetc Hexa Distro Fusion backpack
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Backpack to mount the Fysetc hexa distro fusion board to the back of a Voron printer
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 869
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (9)Wydruki i komentarze (Wydruki: 0) (Komentarze: 4)Remiksy (0)Kolekcje (36)Powiązane
Backpack for the Fysetc Hexa Distro Fusion board.
Interfaces with N3mi Umbilical Exhaust plates v2 (https://github.com/DraftShift/CableManagement/tree/main/UserMods/N3MI-DG/Umbilical_plates_V2)
Uses a PUG for cable strain relief https://www.printables.com/model/378567-pug-parametric-umbilical-gland
BOM:
- Base to mount the hexa board to
- Bracket (and 1 mirrored bracket, make sure to mirror one in your slicer) to mount the base plate to the umbilical plate. VHB tape will probably also work but mine sucks
- Cover, mounted with 4 M3x4 or M3x6 screws to the base plate. FHCS is you want to have it nice and flush.
- 14 M3 heat inserts (4 for the hexa board, 2 for the bracket, 4 to mount the cover and 2 to bolt the PUG clamp to the base)
- Clamp to clamp your PUG
The logo is offset 0.1mm which allows you to easily paint it to a different color in your slicer but is printed as normal with 0.2mm layer height.
You will need to orient the parts flat in the slicer.