1 / 4
Fysetc Hexa Distro Fusion backpack
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Backpack to mount the Fysetc hexa distro fusion board to the back of a Voron printer
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 86
- Makes
- 0
- Views
- 869
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
Backpack for the Fysetc Hexa Distro Fusion board.
Interfaces with N3mi Umbilical Exhaust plates v2 (https://github.com/DraftShift/CableManagement/tree/main/UserMods/N3MI-DG/Umbilical_plates_V2)
Uses a PUG for cable strain relief https://www.printables.com/model/378567-pug-parametric-umbilical-gland
BOM:
- Base to mount the hexa board to
- Bracket (and 1 mirrored bracket, make sure to mirror one in your slicer) to mount the base plate to the umbilical plate. VHB tape will probably also work but mine sucks
- Cover, mounted with 4 M3x4 or M3x6 screws to the base plate. FHCS is you want to have it nice and flush.
- 14 M3 heat inserts (4 for the hexa board, 2 for the bracket, 4 to mount the cover and 2 to bolt the PUG clamp to the base)
- Clamp to clamp your PUG
The logo is offset 0.1mm which allows you to easily paint it to a different color in your slicer but is printed as normal with 0.2mm layer height.
You will need to orient the parts flat in the slicer.