Counting matching models…
Simple (probably overengineered) brackets to mount 2 DIN rails to the back of 2020 based printer to mount several Mellow LLLPlus filament buffers. brackets have allowance for 4mm of panel/foam/whatever on the rear of printer. Parts should…
As the name suggests these docks use screws to hook on, they are compatible with Dragonburner and Stealthburner. The old cowls can be reused, you just have to put two spacers and longer screws with nuts on the Toolheads. For the parking…
- added StealthChanger logo - increased body length to support spools up to 80mm wide - for 3mm acrylic and 3mm foam
A modified version of @DETMan's BTT HDMI5 Mount for Clicky Clack Door for use with the stealthchanger Door Buffer. Print with normal voron settings.
I'm assembly a tool in the Stealth changer ecosystem, and i encountered an interference in the original mounting point that i solved with this offset standoffs. You can use this in case your building a tool with: Orbiter v2 Drangon burner…
A jig for drilling the mounting holes on DraftShift's door buffer V2 cross bar.
Printing poker chips was my goto method for calibrating my XY nozzle offsets. This chip can be used to see multiple offsets at once. Print the main body with T0 and all other parts with different tools.
Just a resting point for the sexball, since it cannot stay in place when printing since it will interfere with the toolhead. it has phantom faces, 0,01mm of depth that slicer will ignore for printing, but let you color the Voron logo and…
I cut down the anthead docks so that you could see more of the extruders.
I designed and use these for my Nitehawk-SB based Stealthchanger build. Print from ABS/ASA or other high temp/strength materials. Uses two 2mm wide zipties for indirect tensioning. Allows for two 1mm lengths of piano wire to run through…
Amazing Panel Latches modified with a Stealthchanger Logo in four orientations so it's the right way up on all sides.
Hardware to use: 2 M3x5x4 inserts (Voron) 8 N52 neodymium magnets 6x3 1 PG7 connector Wagos 221 415 Remix of the BirdsNest Packs by EddieSha04
Fysetc Stealthchanger Distribution Board Bracket for din rail adaptation. It's the black piece between the din rail adapter and board.
This is a mount for my StealthChange setup. This will fit on a WWG2 with a EBB36, it also clears the OptoTap. There's also a hole for a spring steel support for the umbilical. You'll need 2 M3 heat insert (Standard Voron M3s M3x5x4mm) to…
To be able to mount EBB36 cover over this, I made heatinsert holes 1mm deeper on the mounting plate, so my 5mm M3 standoffs reach better to hold the PCB on it. Cover is then mounted on these standoffs with M3x20 screws. Also shaved 0.5mm…
I've tried the original front and some mods, but was never fully satisfied. In some cases the screws were a bit too long for my liking (especially when just screwed into plastic) or the screw holes didn't fit that perfect or it was a bit…
Wrist Watch Galileo Extruder - SHT36 Max V3 toolboard mount - other toolboards may fit. Required to be remixed to fit Mello Over Molded cables and Xt30 connectors Requires use of Heatsert brass threaded inserts Mainly designed for use…
SHT36 Max V3 Toolboard cover Stealthchanger Toolhead cover Modified from an EBB36 design, specifically for the MELLO Fly SHT36 Max V3 board on my Umbilical toolboard mount - pictured - for WWG2 Extruders
Checked a few models online, none quite fit my idea perfectly and most where a bit bulky for my taste. I took some ideas and modelled these to fit tightly and be as small as possible while sturdy enough. Print the parts in the orientation…
Helps guide the backplate on to the CNC shuttle. Built in supports can be removed by pinching the part and support together. Attach with 2x M3x6 BHCS.
Print one for every side, one of them mirrored.
I wanted a vinyl cutter for my StealthChanger build, I wrote about it https://github.com/drake7707/Drakarah3DPrinter/blob/main/journey-to-stealthcutter.md if you want more details how to use the toolhead
This is a stealthchanger mount backplate and shuttle assembly specifically for a Sovol SV08 with a standard head. See https://github.com/DraftShift/StealthChanger for details of the StealthChanger system. If using the stealthchanger for…
If you are implementing a toolchanger using the stock SV08 toolhead, the rear located fan would need removing since it gets in the way when docking/undocking the head. This cowl allows the rear fan to retained by rotating it out of the…
This is a stealthchanger head cover to allow cleaner mounting of a SV08 standard head onto a front mounted dock. This gives the head a flat front face, and allows for magnet placement to aid in dock retention. See…
The SV08 stealthchanger mount moves the head up 15mm and slightly forward. It will require raising. The bed shims require M4 thread inserts. Remove the bed, insert the shims as per photo, use the 6 original bed screws to fasten the shims.…
voron tap version on previous part see link below for rest of parts Umbilical for EBB42 with LGX on Voron stealthburner by xp1ratex | Download free STL model | Printables.com
Anthead Backplates for StealthChanger with cable funnel ST,HF,UHF
This magnet mod secures your toolhead firmly in the dock for reliable, repeatable tool changes — no shifting, no misalignment. The magnets are integrated into the back of the dock ( back.stl ), adding minimal print time and material. On…
This is a remix of the Screw Docks originally made by KEKO to work with the StealthChanger System. I already had the printed Door Buffer from DraftShift and wanted to fit these in to the original space, so I modified the dock slightly to…
Stealthchanger / Toolchanger Voron Design Calibration Cube This is multi parts so you can color them easily.
Stealthchanger / Toolchanger test Chip. This is multi parts so you can color them easily. Available in .stl, .obj and .3mf files.
Cable can be run inside the extrusion back-facing side. Camera angle can be adjusted. I print it in ASA-CF because the nevermore will blow hot air to it. The camera is secured by m2 screws. Please print with support touching plate BOM: 2…
See https://discord.com/channels/1226846451028725821/1401451184723595264
Dock was modified to work with the full length dock version I am using on my StealthChanger build. Big shout out to Dudewithan02 for the original mod of the dock using the short version and to the team at DraftShift Design Check the…
A mounting solution for use with WWG2 extruder & EBB36 toolboard, remixed from SputnikOC3D's model for the SHT36 Max. This mod offers more clearance around components on the back of the EBB36 that were previously clashing with the printed…
A mounting solution for use with Orbter 2.5 extruder & EBB36 V1 toolboard, remixed from LDO's Universal Mount to suit 36mm pancake motors This toolboard is designed for use within the Draftshift Design Stealthchanger project, specifically…
just stitched 2 mods together cant take credit for this.... these are untested printing as i post this lowered wiper too combined both of these two mods. one for magnets the other for all pins being screwed in. I cant take credit. i just…
Heat inserts to go deeper so I can use 5mm standoffs to attach EBB36 to plate and then attach cover to standoffs.
The BTT HDMI5 V1.2 display moved the HDMI and usb cables to be perpendicular to the PCB, so older versions of this mount won't work. These files should work with the Clicky Clacky door mod, and/or the Door Buffer for Stealthchanger. There…
Modular dock base with 6 magnet holes to help hold the tool head in place. It uses all the same parts as the official DSD modular dock; the only difference is that Base.stl is replaced with my model, along with the dragon burner cowl, of…
Dragonburner cowl with 6 magnet holes to hold the tool head in place when changing tools. It uses all the same parts as the official Dragon Burner; the only difference is that the cowl is replaced with my model, along with the dock base,…
A simple solution after experiencing a few false triggers during sensorless homing on the X axis. You will need to replace the M3x16mm bolts for M3x25mm
To avoid repeating myself, here’s everything you need to know about the Y Endstop , including configuration details: 👉 Sovol SV08 Y End Stop Depending on your MCU, you can reuse the original filament sensor port for the X Endstop ,…
I’m not a designer, just had this idea and it worked. its Stealth Changer for Trident or similer CoreXY. I’m still working on it and trying things out. It hasn’t been tested enough yet, and it can definitely be improved, but I’ve reached…
Eine einfache Änderung am Stealthchanger Schlitten für eine Cartographer (Beacon) Aufnahme. Der Schlitten ist nach unten erweitert mit 2 M3 Einschmelzmuttern um den Carto zu befästigen Der Abstand ist für ein Revo-Hotend. Für andere kann…
Ich habe den StealthChanger Dragon Burner EBB36 Mount for WWG2 (Wrist Watch G2) umgeändert, so das er auf einen Orbiter V2 passt. Ihr braucht 2 M3 Einschmelzmuttern, um das PCB zu befestigen. Ich empfehle ABS
These are some colorful accent parts to show off the toolchanging capabilities of your V2.4 StealthChanger. I printed them with Polymaker Red, Green, Teal, and Black PLA PRO but you can use whatever materials and color combination you…
Tried to modify this for my need, as I have one toolhead with Sherpa Mini Moved the third mount hole to align with stealthchanger backplate for A4T
Modified N3MI's excellent umbilical plate to work with a 7-segment round LED that's available for $1 or so. Installs just like the original, but get a 7-bit WS2812 LED from aliExpress . I used a 3-pin JST-XH connector to make it easier to…
Modified N3MI's excellent umbilical plate to work with a 7-segment round LED that's available for $1 or so. Installs just like the original, but get a 7-bit WS2812 LED from aliExpress . I used a 3-pin JST-XH connector to make it easier to…
Introduction I tried the previous design and found my bracket was moving around a bit, and wanted something a bit more sturdy and perhaps simpler if possible. I also wanted something that would work with the Nudge or Sexbolt alignment…
Removed fan grills for better layer adhesion as original model kept breaking with ABS. Added StealthChanger Logo. I used 2 M3x25 screws but all 4 holes are available to be used for various mounting.
Kleiner Mod für das Dragonburner Dock von KEKO. Die sind einfach nur Perfekt gelungen. Danke dafür. Ich habe unten die Nozzlepads direkt ran gedruckt und so geändert das eine Federgelagerte Daumenschrauben M5 mit einer Selbstsichernden M5…
You gonna need dragonburner with magnets from Stealtchanger discord, get one now! https://discordapp.com/channels/1226846451028725821/1320029517376655462 40mm or 50mm M5 bolt is required, just download correct model.
X endstop mount for stealthchanger to relocate x endstop to the back modded to relocate x endstop to the back - used in combination to voron rear umbelical added x endstop mount to relocate x-endstop for stealthchanger
for toolchanger Anthead toolhead with more magnets - might have to use a little super glue but works better in my opinion keeps the tools in more stables
Simple (probably overengineered) brackets to mount 2 DIN rails to the back of 2020 based printer to mount several Mellow LLLPlus filament buffers. brackets have allowance for 4mm of panel/foam/whatever on the rear of printer. Parts should…
I reinforced the mounting holes and structure of the mount, so that there is no EBB36 Wiggle when straining the strain relief. I did this by looking at the PCB components arrangement of the EBB36 1.2 and seeing where I could add more…
Hi, SHORT INFO: The second picture shows the older version, without a barrier behind the pad. Its just added to show the position, when the toolhead is mounted! Because Oozing was one of my biggest problems I added these Cleaning Pads to…
This is a modified version of the Anthead Stealth Changer backplate, but with an extended pad for the PCB mount This works in conjunction with the modified PCB board I made here:
Overview I liked the mods that added magnet feet and screw pins, but I also wanted to have no glue in magnets. I've put these all together and provided the step file. The feet now use magnets instead of screws, but I have included a…
This model is a combination of many mods. This one adds magnets to the faceplate of Stealthburner for use in Stealthchanger. I've only modded the nozzle cam versions as they have enough room to tuck the magnet away from the leds that use…
Док-станция мало отличается от оригинала, за исключением того, что адаптирована под установку внутри рамы принтера. Кроме того, крепление к профилю уже заложено в конструкции. The dock station differs little from the original, except that…
Переделал крышку чтобы не было зазоров по бокам.
i needed to adapt backplate and PCB plate for stealthchanger nh36 mount on anthead
This is an btt eddy holder, meant for a stealtchanger, in order to use it i made a costum shuttle, its the normal one with 2 heat inserts in the back, to attach the eddy. Then there is the Connector piece, which is basically just an…
Magnetic dock for the Stealthburner with a Dragon hotend for my Stealthchanger. Based on EasterWorks' model on Github. Per GitHub recommendations: Current options allow for both Revo and Repido 2 hotends (credit to nicksnoopy on Discord…
Magnetic dock for the Stealthburner with a Dragon hotend for my Stealthchanger. Based on EasterWorks' model on Github. Per GitHub recommendations: Current options allow for both Revo and Repido 2 hotends (credit to nicksnoopy on Discord…
A simple mount for the Cartographer cable without a cable clamp, just use a zip tie. It uses one of the threads in the motor mount that originally was for a cable tunnel. You can also optionally mount a Generic 3950 temperature sensor for…
The design was developed to mount a StealthChanger Shuttle while keeping the x-axis chain and mechanical endstops. Based on StealthChanger Shuttle Keeper for a MGN12 linear rail and 6mm belts (StealthChanger repository:…
When testing my A4T toolheads on the stealthchanger modular docks I noticed they had a tendency to pivot back. I quickly found the common solution is to use this dock replacement which only adapts the short version and requires a reprint.…
I wanted to use the A1 mini wiper brush on my Stealtchanger build but didn't see an existing model for it, so I made this one. It fits the brush from the Panda Brush mod for X1/P1 perfectly, or the brush from the A1 mini if you cut it…
nitehawk36 backplate for orbiter2.5 and stealthchanger dragonburner backplate - no colision with optic sensor
Not just for the StealthBurner, The StealthChanger is a tool changing mechanism for the Voron V2.4 but easily adaptable to other flying gantry printers Currently supported tools are the StealthBurner, DragonBurner, RapidBurner, and…
As the name suggests these docks use screws to hook on, they are compatible with Dragonburner and Stealthburner. The old cowls can be reused, you just have to put two spacers and longer screws with nuts on the Toolheads. For the parking…
I found that you don't need the vertical supports if you use the crossbar with stealthburner. All credits go to the team as this is a cosmetic change.
