Nitehawk 36 Toolhead Board Mount for Wristwatch G2 on Stealthchanger with OptoTap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Nitehawk 36 Toolhead Board Mount for Wristwatch G2 on Stealthchanger with OptoTap
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 6
- Makes
- 0
- Views
- 63
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
Nitehawk-36 Toolhead Board Mount for Wristwatch G2 on Stealthchanger w/Tap
Clearance for the Optotap PCB is tight but available
3 Points of attachment to the toolhead
Designed to work with the stock Stealthchanger backplate
Printed Parts (per toolhead)
Toolhead Board Mount
2x - 18.5mm Standoffs
1x - 29mm Standoffs
BOM (per toolhead)
5x M3 Heatsets
4x M3x6 BHCS
2x M3x35 BHCS
1x M3x40 BHCS
Printed Parts
Assemble
Insert heatsets into both ends of 18.5mm standoffs
Insert a heatset into WWG2 rear plate for the 29mm standoff attachment (Use Wristwatch STLs from Anthead github: https://github.com/PrintersForAnts/AntHead/tree/main/STLs/Extruders/G2)
WWG2 - use m3x40mm for the upper motor mount to catch the 18.5mm standoff on the back
WWG2 - use m3x35mm for the lower motor mount to catch the 18.5mm standoff on the back
Attach toolhead board mount to WWG2 18.5mm standoffs with 2x M3x6 BHCS and 1x M3x35 BHCS
Attach the Nitehawk-36 board to the mount using 2x m3x6 BHCS
Designed to work with the Nitehawk 36 Umbilical TPU Sock Usermod: https://github.com/DraftShift/StealthChanger/tree/main/UserMods/Nic335/NH36Sock