Sovol SV08 bed raiser for stealthchanger implementation
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These shims allow the bed to be raised and moved slightly forward to allow for movement in stealthchanger implementation
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 45
- Makes
- 0
- Views
- 645
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
The SV08 stealthchanger mount moves the head up 15mm and slightly forward. It will require raising.
The bed shims require M4 thread inserts.
Remove the bed, insert the shims as per photo, use the 6 original bed screws to fasten the shims. Use 6 new M4 screws to fasten down the bed in it's new position. Re-wire the bed.
Full details of my SV08 stock head stealthchanger build can be found here https://github.com/robandwend/SV08-MultiHead-Conversion
Additionally a mount for a sexball (based on the sexbolt) is included. - see https://github.com/DraftShift/StealthChanger/blob/main/wiki/Bill-of-Materials.md#sexball-probe for details on the sexball