1 / 6
BTT HDMI5 v1.0/v1.2 mount for Voron with Clicky Clacky and/or Door Buffer or StealthChanger — image 1
1 / 6

BTT HDMI5 v1.0/v1.2 mount for Voron with Clicky Clacky and/or Door Buffer or StealthChanger

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

BTT HDMI5 V1.2 has very different connector locations. This should work for both the V1.2 and 1.0 versions.

Rating
0 / 5
Likes
13
Downloads
93
Makes
0
Views
476
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

The BTT HDMI5 V1.2 display moved the HDMI and usb cables to be perpendicular to the PCB, so older versions of this mount won't work.  

These files should work with the Clicky Clacky door mod, and/or the Door Buffer for Stealthchanger.  There are two different sets of files depending on what you need.

Clicky Clacky only:

Clicky Clacky AND Door Buffer (Stealthchanger)

Files/BOM:

You need one “2020 frame main bracket”, which is different for the door buffer version or just Clicky Clacky door. 

One “HDMI5 mount frame” (same for both versions)

Two “HDMI5 cable protector” (same for both versions)

(4) M3x8 SHCS for mounting the frame to the display

Your mount hardware to the 2020 railing.

Printing:

Prints without supports (for me).  if you're worried, add supports. 

I printed in PLA.

Setup:

The three buttons are accessible on the bottom.  Press the middle one to rotate the display/touch to be “upright”

CAD:

Onshape files available here!

Tags