Stealthburner stealthchanger backplate with magnet feet and screw pins
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adds magnet feet, screw pins and no glue in magnets to stealthchanger backplate
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 30
- Makes
- 0
- Views
- 169
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
Overview
I liked the mods that added magnet feet and screw pins, but I also wanted to have no glue in magnets. I've put these all together and provided the step file.
The feet now use magnets instead of screws, but I have included a version with screws in the CAD
The top pins are now designed for wafer head screws. The original design used flathead screws which would cause cracks between layer lines. I also found these screws interfere with the extruder so I've added cutouts that can be applied to extruder backplates.
I like to avoid gluing magnets and found that there is enough room for a screw if I cutout a small amount of the extruder backplate. I've included modded backplates for the CW2 and Galileo 2. Cutout bodies are available in the step file if you are using a different extruder.
To improve this mod further, have a look at my magnetic dock project that adds magnets to the faceplate.
Hardware needed:
 | Screw in 6x3 magnets, 2mm countersunk hole. N and S orientation needed The FYSETC magnets I've been using don't seem to be available anymore Other options are these and these I have not tested but were recommended by others |
 | M2 × 6mm flathead screws for magnets. Grab some 5mm as well for an upcoming project for stealthburner that adds magnets in the faceplate |
 | M3 x 8mm ultrathin wafer head screws for pins |
Supports
I achieved good enough results by using paint on supports in OrcaSlicer as shown here