FYSETC 3.2 LCD + USB
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This isn't a direct remix of Frank's model but I was inspired by it and basically copied the design to work with the…
- Ocena
- 4,5 / 5
- Polubienia
- 11
- Pobrania
- 93
- Wydruki
- 2
- Wyświetlenia
- 768
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This isn't a direct remix of Frank's model but I was inspired by it and basically copied the design to work with the larger FYSETC 3.2" LCD. Giving credit to Frank S. for the idea. Thanks!!
Created in Fusion 360.
Here is the USB cable I used: https://amzn.to/2NxpBmu
USB cable attaches with 2x 12+mm M3 bolts + nylock nuts. I did cut down the tabs by about 1mm to make the USB port flush with the 3D Print. I also drilled out the threads so I could use M3 hardware.
Print instructions
Print face down with no supports.