1 / 2
FYSETC 3.2 LCD + USB
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This isn't a direct remix of Frank's model but I was inspired by it and basically copied the design to work with the…
- Rating
- 4.5 / 5
- Likes
- 11
- Downloads
- 93
- Makes
- 2
- Views
- 768
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This isn't a direct remix of Frank's model but I was inspired by it and basically copied the design to work with the larger FYSETC 3.2" LCD. Giving credit to Frank S. for the idea. Thanks!!
Created in Fusion 360.
Here is the USB cable I used: https://amzn.to/2NxpBmu
USB cable attaches with 2x 12+mm M3 bolts + nylock nuts. I did cut down the tabs by about 1mm to make the USB port flush with the 3D Print. I also drilled out the threads so I could use M3 hardware.
Print instructions
Print face down with no supports.