FYSETC Portable Input shaper Mount for Voron V0.2 with Umbilical mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for the Fysetc PIS on a Voron V0.2 with the Umbilical mod installed.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 187
- Wydruki
- 1
- Wyświetlenia
- 1203
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
After setting up the Umbilical mod on my V0.2 Voron, i realized i don't have place for the PIS.
The mounts that i found were all either fixed with screws, too small for the newer MiniSB, had the USB port on the wrong side, or were just too bulky for me.
This mount is designed to be snap-fit into the Screwholes. and is also easily reversible if you don't want the PIS to be on there the whole time.
The PIS is fixed with 2 M3 Screws that get's threaded by itself.
Print it the same way as the other parts of the Voron functional parts.