Compact Fysetc Spider and RPI 4 Case and 120mm Fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Introduction The Fysetc Spider is pretty new to the market and usually used for the fantastic Voron printer builds. I…
- Ocena
- 4 / 5
- Polubienia
- 15
- Pobrania
- 240
- Wydruki
- 0
- Wyświetlenia
- 1928
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Introduction
The Fysetc Spider is pretty new to the market and usually used for the fantastic Voron printer builds. I want to use it for my Creality and Sunlu Printers, so I build a maker-friendly compact case, which can be screwed in and out easily.
This build is based on my very similar SKR 1.3/1.4 + Raspberry Pi4 compact case.
You can easily exchange cables when you need to work on your printer. No fiddling around with cut-holes. Swapping parts is superfast and convenient.
Required Parts:
- 120mm case fan, which comes on top of the case
- 4x M3 screws (5 to 6mm length) for the Fysetc Spider boards. The fine-pitch PC-screws are working fine!
- 4x M2.5 (5 to 6mm) screws for the Raspberry pi4
2x M3 screws (6-8mm length) to secure the lid
Printing
The case and lid is not only fast printable, but also don't need any print support!
The case takes around 5 hours and the lid around 2 hours of print time on my Ender 3 Pro (0.4 Nozzle).
After Print Prep
Please have a look at the photos: After printing, you just need to cut away the little support-bridges with a cutter.
Remix-Friendly
To speed up the community for the Fysetc Spider boards, I added the STEP file, the Fusion 360 Archive, which is carefully sorted, grouped and uses function parameters to make easy modifications to your needs.
Space for additional Hardware:
There is a still convenient space of 60x60 mm for additional parts. Remix and customize it to your needs
Similar Cases (Remixes):
BigtreeTech SKR 1.3/1.4 with RPI4 case: https://www.prusaprinters.org/prints/79197-skr-v13-v14-and-raspberry-pi4-rpi4-compact-case
Fysetc Spider compact case: https://www.prusaprinters.org/prints/79184-compact-silent-fysetc-spider-case-for-80mm-fan
Versions and Changelog:
v1 - first release
Known Issues:
RPI4-Storage:
The microsd / tf-card slot of the Raspberry Pi 4 is only reachable from inside the case. If you really have to change the micro sd-card frequently, you may need to use an extension cable.
Case-rigidity:
the case may require a bit more structure as it flexes when not attached to a wall. Not a showstopper, but I want to avoid increasing printing time due to more material at this stage.
Print Settings
Printer: Creality Ender 3 Pro
Rafts: No
Supports: No
Resolution: 0.2
Infill: 25%
Filament: Geeetech PLA Black