1 / 11
Compact Fysetc Spider and RPI 4 Case and 120mm Fan — image 1
1 / 11

Compact Fysetc Spider and RPI 4 Case and 120mm Fan

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Introduction The Fysetc Spider is pretty new to the market and usually used for the fantastic Voron printer builds. I…

Rating
4 / 5
Likes
15
Downloads
240
Makes
0
Views
1,928
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution
Introduction

The Fysetc Spider is pretty new to the market and usually used for the fantastic Voron printer builds. I want to use it for my Creality and Sunlu Printers, so I build a maker-friendly compact case, which can be screwed in and out easily.

This build is based on my very similar SKR 1.3/1.4 + Raspberry Pi4 compact case.

You can easily exchange cables when you need to work on your printer. No fiddling around with cut-holes. Swapping parts is superfast and convenient.

Required Parts:
  • 120mm case fan, which comes on top of the case
  • 4x M3 screws (5 to 6mm length) for the Fysetc Spider boards. The fine-pitch PC-screws are working fine!
  • 4x M2.5 (5 to 6mm) screws for the Raspberry pi4

2x M3 screws (6-8mm length) to secure the lid 

 
Printing

The case and lid is not only fast printable, but also don't need any print support!
The case takes around 5 hours and the lid around 2 hours of print time on my Ender 3 Pro (0.4 Nozzle).

After Print Prep

Please have a look at the photos: After printing, you just need to cut away the little support-bridges with a cutter.

Remix-Friendly

To speed up the community for the Fysetc Spider boards, I added the STEP file, the Fusion 360 Archive, which is carefully sorted, grouped and uses function parameters to make easy modifications to your needs.

Space for additional Hardware:

There is a still convenient space of 60x60 mm for additional parts. Remix and customize it to your needs

Similar Cases (Remixes):

BigtreeTech SKR 1.3/1.4 with RPI4 case: https://www.prusaprinters.org/prints/79197-skr-v13-v14-and-raspberry-pi4-rpi4-compact-case 
Fysetc Spider compact case: https://www.prusaprinters.org/prints/79184-compact-silent-fysetc-spider-case-for-80mm-fan

 

Versions and Changelog:

v1 - first release

Known Issues:
RPI4-Storage: 
The microsd / tf-card slot of the Raspberry Pi 4 is only reachable from inside the case. If you really have to change the micro sd-card frequently, you may need to use an extension cable.
Case-rigidity: 
the case may require a bit more structure as it flexes when not attached to a wall. Not a showstopper, but I want to avoid increasing printing time due to more material at this stage.

 

Print Settings

Printer: Creality Ender 3 Pro

Rafts: No

Supports: No

Resolution: 0.2

Infill: 25%

Filament: Geeetech PLA Black

Tags