Counting matching models…
You've just stumbled upon a Case Enclosure Mount for your Ender 3-3 Pro /w Raspberry Pi 4 Model B & Hosyond 7" Touchscreen IPS Display. Upgrading your Ender 3? Hate your puny Ender 3 colorless BLUE LCD display? Or... Maybe you've upgraded…
This remix was created to accommodate the E3P_RPi4b_Hosyond_TIPS_Display (Case Enclosure Mount).
You can use either double-sided adhesive tape, Tesa Powerstrips, or screws to attach the base plate to the wall. The housing is then hooked onto the base plate and held in place with magnets (10mm diameter, 2mm height). Version for…
!!!!! The printed parts are not verfied yet ! !!!!! !!!!! I just made this page in advance before last verification of 3d files !!!!! These are mounts for electronic parts in a typical Klipper hardware setup. There are : Raspberry Pi 4B…
My model serves as a connector between the models 'Hyperpixel 4' LCD Cover Display' and the 'Cable Entry Ikea Lack".
after various searches for ideas i found this result via google: https://bit.ly/392aYQR I then built a similar device because I needed a linux device for diagnosing the components in our vehicles. I wrote my own GUI for it, so that I can…
I have a home assistant server made from RPi4 and it was quite messy with all the cables. So here is an unique case, that hides then in a way, that all come from back side. The housing offers a bit of space for using the header pins -…
This mount allows one to attach a Raspberry Pi 4 to a 3D Upfitters 3d printer enclosure . This is a base only and is designed to be used with any of the tops based off Malolo’s snap fit design Attach the unit to your favorite corner using…
A v1 version of a rack shield for a RPi4 with cooler case, to be mounted in a 2U 19" rack system. Need 4x2.5mm, 20 mm long screw I've used this 19" 2U frame : DAP 2 HE Rackblende f. Modulsystem 10 Segmente MP-1
Just a quick remix of shoeys_for_newey 's RPi4 mount for the ender 3 v3 se. I had to lengthen it a bit to fit a different case that I wanted to go with for my RPi4 that I have running octoprint. Here is the case I used:…
it is just a large case with snaps where you can add a notua fan 40x40x10 but even x20, i have exaggerated in the height but i prefer to have moer space than less. it is snug snap, better to print it in petg, if you use PLA is fine, but…
I had a request to make a Rpi4 version of my Book Case. I was able to print it out and test it today so here it is. I have also published two versions for rpi5 and copied/adapted most of the description from that model. I wanted a good…
This mount is for a Prusa Mk3 and raspberry pi 4b. The only difference between this and the original is removal of the punch-outs and a different style of vent.
You can hide RPI4 with shield to the case and mount it to the wall. You can made some kind of Home NAS server.
This is basically the same as the original, but includes a cutout in the door for the X-axis motor cable strain relief, and better aesthetics. Previously, either the heatbed or X-axis cable had to run through the bottom of the case and…
I've had the original RPi3 case mounted for years. Wanted to upgrade to RPi4 and also use a buck converter to power the RPi instead of USB charger. Also wanted to mount the case higher. Buck converter box (for LM2596, use box2 models):…
intégration octoprint pour raspberry dans le tiroir de la ender 3S1
I didn't have any screws/nuts so added some 'pins' to the tray to secure the pi
I could not find any RPI cases that also housed the UPS, so I designed my own. There are no internal screws to fix the RPi or UPS as it all sandwiches together. The RPi and UPS mounting holes align and seat nicely on locating nipples.…
A rail mount extension to the Malolo's RPI4 case that allows mounting a UGreen SSD M.2 Enclosure as in here .
Geekworm Heavy Duty Aluminum case for RPi4 Bottom Part replacement
I had gotten my hands on an 8gig RPi4 model and decided to give it a go for a portable game station. Despite having many cases online, none fits the Waveshare 7inch screen I had so gone back to the drawing board with this. Parts:…
You've just stumbled upon a Case Enclosure Mount for your Ender 3-3 Pro /w Raspberry Pi 4 Model B & Hosyond 7" Touchscreen IPS Display. Upgrading your Ender 3? Hate your puny Ender 3 colorless BLUE LCD display? Or... Maybe you've upgraded…
This remix was created to accommodate the E3P_RPi4b_Hosyond_TIPS_Display (Case Enclosure Mount).
Imported from Thingiverse. A couple of different cases for the Raspberry Pi 4. Low and tall version for Ø30 and Ø40 mm Noctua fans. Not sure about other brands, but should work for a couple of other ones. One version made to fit the 30x30…
You can use either double-sided adhesive tape, Tesa Powerstrips, or screws to attach the base plate to the wall. The housing is then hooked onto the base plate and held in place with magnets (10mm diameter, 2mm height). Version for…
A housing for a Raspberry Pi 4 with 5" touch screen DSI display and PCM 5122 (for Pi zero W) Audio Hat. Designed to be as small as possible. Using M2 screws to assemble. Foot and hinge needs to be printed twice with one mirrored. hinges…
some drilling and screwing required. fan substitute → https://www.digikey.com/en/products/detail/qualtek/FAD1-04020BBMW11/2600065 This mounts with t-nuts on the 2020 extrusion of the printer it's working with. I designed this in FreeCad.…
A case with 40mm fan for the Raspberry 3 or 4 with a Waveshare 5Inch DSI LCD touch screen. Ein Gehäuse mit 40mm Lüfter für den Raspberry 3 oder 4 mit einen Waveshare 5Inch DSI LCD Touch Screen. Print Settings Printer Brand: Anycubic…
This is a bezel to convert an old IMac to a flatscreen display since the old display is a CRT monitor there needs to be a round bezel on the flatscreen to fill the gap. This started as a project of mine to run a raspberry pi 4 in a IMac…
Based on the excellent case by Pillar I changed it to suit my SSK External 128GB Portable SSD, USB 3.1 Gen2 (6Gbit/s) SSD External Disk. It needed to be just 1mm taller. I ordered a short USB to usb-C cable with angled connector because…
What: This is a foldable and customizable Raspberry Pi 4 case. Using 3MF file directly in PrusaSlicer, you can decide which of the listed below, optional features you want to keep. Why: Somehow I couldn't find a case I'd like, so I…
Cover modified to Fit HexCase Cover added clearance to IceTower by .5mm per side Base modified to match HexCase Snaps (interchangable) Collabortive Project with WeakNerve ( https://www.prusaprinters.org/social/9859-weaknerve/ ) Concept…
Einsy Board + RaspberryPi 4 + DC-DC Stepdown, original case modification/remix, use original access door. Eisny-base.stl modification to allow for mounting rPi4 + dc-dc step-down converter while maintaining the original design look and…
This case mount is a remix for a Rpi4b of the Rpi3b Prusa Mk3 Frame Mount Case by 3D_Dynamics. It works perfect in the Prusa MK3. The half hexagon on the end of the arm hooks into the hexagonal cut out on the top of the z axis, and the…
Remix of a remix here. First, I ran the bottom through netfabb which resolved a lot of errors. Second, I remixed the top to significantly short the screw pole closest to the GPIO pins. This allows one to use a Pimoroni Fanshim inside the…
Easy to assemble box for 4x SSD and Rpi4B. It can serve as a home NAS server. Passive cooling.
Remix of “karelv” remix for a RPi4 case which clips onto a 2020/4040 extrusion using my own T-nut clip from : T-Nut ClipOn by ZiggyR | Download free STL model | Printables.com Case top is the original!
This is version 2.3 . (working on MK3) List of required parts: Raspberry Pi 4 Model B - RAM 4GB+ 1-4x HDD for NAS (Seagate IronWolf, 3,5") USB 3.0 hub 120mm Fan (low noise) + 80mm fan (low noise) PSU 12V (180W) SD card (16GB+) Adapter…
This is a quick and dirty remix of the RetroDeck to work with a Raspberry Pi 4. It's just the bottom pieces - you will need the top pieces from the original model to complete the build. In addition to modifying the back right section to…
I couldn't find a case for my Raspberry Pi 4 with PiJuice HAT and Waveshare PoE HAT installed so I made one myself. I use it for HomeAssistant but there is nothing HA specific so it can be used for anything else. FreeCAD source code is…
Remixed the 2020 mount solution with a wall mount. I hope he don't mind. This works great with "malolos-screw-less-snap-fit-raspberry-pi-4-model-b-case-stands-model_files" Thanks, Mike C
Remix of the design by glowen the mounting bracket for the Raspberry Pi4 for the EZPi4 Pro Case that fastens to a Prusa MK3S which would look like an OEM part / accessory for the 3D printer. I remixed it to provide access to the 4 USB…
I took a great design and slightly modified it to fit my needs. With this it helped me to fit my Noctua 4010 fan. I used the fan cover design from (https://www.thingiverse.com/thing:5901584/files) Thank you for allowing me to print your…
I like the performance of the ice tower (low profile) cooling fan a lot. Unfortunatelly assembled it's deep and doesn't fit in the most of cases. Finally found a very nice base for an extended version. Beside the original parts only the…
Modified to remove the redundant support leg and use M3 socket head screws The attached 3mf/STEP files are slightly different to the images… I modelled the support legs in the wrong position which made the case sit 7mm lower than the…
I modeled this bad boy up to fix a heating issue with my pi-hole . So simple. I love it. The ability to go: “Gee I wish I could make this fan fit nicely on this aluminum raspberry Pi case … oh wait… I CAN!” :D Seventeen mins later boom!…
General Info A snap-fit case for a Raspberry Pi 4 Model B with a vent for a 30 mm PWM fan. Center-to-center hole distance: 24 mm. Hole diameter (on model): 2.6 mm. Example of PWM fan used:…
I bought a Waveshare 4.3 display and case for mounting a R Pi 4 but needing to have a way to mount it, I made my own.. I didn't need the HDMI outputs, sound jack, or the gpio pins….. I made the case with access to the ethernet, usb A's…
This is an modification of the original RPi4 UPS case by Jason with changes and upgrades for the newer revision of the GeeekPi RPi UPS hat (aka EP-0136) for Raspberry Pi 4 . UPS Link: https://wiki.52pi.com/index.php?title=EP-0136…
5" touchscreen desktop case with RPi4 mount inside. This allows the display to be used universally. This can be used for Octoprint. I used four M3*10 each for mounting the RPi4 and the lid. Four matching nuts are also needed for both. The…
When using Klipper the original screen on the Aquila X2 (and the Ender 3 I suppose but I don't know if it uses the exact same screen mounting bracket, I doubt it) becomes useless, only displaying a Voxelabs logo. Until someone makes…
A combined and compact case for a RPI4 + 5-inch touch Display - in my case running OctoPrint/OctoDash. It has a mounting arm to attach it to the original Prusa enclosure using 2 existing holes on the side. The Display only mounts in the…
I designed this box to integrate the Einsy rambo and be able to deport the Raspberry 3B+or 4B and improve the cooling of the whole The box has many advantages: Compatible with my bear feet…
Simply changed the model of the medium 40mm fan top to include a grate to protect the fan/ your fingers. Recommend the case be pretended out of something more temperature tolerable than PLA
klipperscreen 7 inch display-h with raspberry pi4 enclosure and mount uses this screen https://www.ebay.com.au/itm/175931482613 needs 9x small button head wood screws and 4x m2.5 10mm screws for screen needs 3x m5 15mm screws for mount to…
Cathodic TV-style case for BTT PITFT50 V2.1 screen + RPI4 + fan This was designed so i don't buy anything else than what i had on hand, you will find a recap of what's needed down below. The main concern when designing this was airflow :…
All the parts you need for the Prusa MK4 and Raspberry Pi Camera Module Version 3. As with the original, the bracket (the piece holding the arm to one of the Z-mounts) requires one M3 x 16 mm cap screw. The Raspberry Pi 4 mount I chose…
A mount designed for the compact aluminium RPI4B case by Geekworm. It is designed to use the entire case without having to sacrifice a part of it resulting in better cooling. 2.5x12 or 16 screws can be used to connect the mount to the…
Remixed version of Jerlo's Bear case with updated geometry and a Cybertronian flair.
Very simple case for the BTT Pi TFT70 V2.0. The Raspberry Pi attaches at the back of the display, as per original design and everything is enclosed. An 3007 fan sucks air via the vents on the side of the display and pushes it out from the…
I tried out many cases, but somehow my requirements were never met: Silent Case for the Raspberry PI4 and BigTreeTech SKR V1.3 , V1.4 or V1.4 Turbo Be able to Add / Remove electronics quick and easy, while the case can be in place. Small…
This adaptor can be printed without any support. With M2.5 screws the RpPi4 can be directly attached, while four M4 Screws attach the holder to the scope. When using the handle or a guidescope one can use two screws for that attachment…
This holder is designed to hold the Rpi1 (in a case) and an external hdd. The holder clips into the main honeycombe wall, the mounting points also have countersunk holes to allow for the holder to also be screwed to the wall, providing…
Motivation I wanted to add a power hat so that the raspberry pi can be powered by the 24V (or 12V) rails from the Prusa PSU. This allows you to connect a raspberry pi to your Mk4 printer without a separate usb-c power wort, reducing cable…
I constructed this board to hold the above mentioned controller for development purposes. The part was printed with PLA with a layer of 0.3 mm. Any other filament works too. No rocket science. Step file included. F360-file on request. The…
Tato krabička slouží pro uschování tiskařského ovládacího panelu. Osobně ji umístním do boxu pro tiskárnu. Hledal jsem nějaké řešení jak RPI4B s dvouma relé schovat a zároveň udělat nějak pěkné. Tohle je první verze, uzavírání je řešeno…
This is for the 4.3" screen for raspberry pi 4, the screen i used came with mounting for the pi on its back. use the spacers/washers when installing
With this bottom of the case you have the possibility to screw your Raspberry Pi 4 to a wall with M3 countersunk screws. I‘ve included the Pimoroni Fanshim top for RPI4 as that is what I‘m using on my enclosure. The case bottom is…
