1 / 9
rpi4/5 POE toll
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed a case form my RPI4 with a large POE (bought on amazon), I found a normal case and I modified it.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 57
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
it is just a large case with snaps where you can add a notua fan 40x40x10 but even x20, i have exaggerated in the height but i prefer to have moer space than less.
it is snug snap, better to print it in petg, if you use PLA is fine, but you will need some force to close it.
not much space to get the SD from the back, which should be improved.
the POE it is the cheapest you can find on Amazon and I can tell you works great, even with a DVB-T decoder attached at usb… the goal was to create a tvheadend server…