RetroDeck - RPi4 version
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a quick and dirty remix of the RetroDeck to work with a Raspberry Pi 4. It's just the bottom pieces - you will need the top pieces from the original model to complete the build.
In addition to modifying the back right section to accommodate a RPi4, I also added a keystone socket in the back left for ethernet. You will need a keystone coupler and a short patch cable to break out the ethernet connection to the outside. Something like this: https://smile.amazon.com/VCE-Listed-5-Pack-Keystone-Coupler-White/dp/B0116T7XMQ
I also added a bunch of speed holes in the bottom and skeletonized the internals a bit so it will print faster and use less filament.
After making these modifications I switched gears and decided that I wanted a MiSTer instead, so I never actually printed this. Everything should fit, but consider it untested because that's what it is.