RetroDeck - RPi4 version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
GutBomb's RetroDeck modified for a Raspberry Pi 4
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 35
- Wydruki
- 1
- Wyświetlenia
- 447
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a quick and dirty remix of the RetroDeck to work with a Raspberry Pi 4. It's just the bottom pieces - you will need the top pieces from the original model to complete the build.
In addition to modifying the back right section to accommodate a RPi4, I also added a keystone socket in the back left for ethernet. You will need a keystone coupler and a short patch cable to break out the ethernet connection to the outside. Something like this: https://smile.amazon.com/VCE-Listed-5-Pack-Keystone-Coupler-White/dp/B0116T7XMQ
I also added a bunch of speed holes in the bottom and skeletonized the internals a bit so it will print faster and use less filament.
After making these modifications I switched gears and decided that I wanted a MiSTer instead, so I never actually printed this. Everything should fit, but consider it untested because that's what it is.