1 / 3
FYSETC Pi Mipi 5" DSI LCD V1.1 Screen Mount for Switchwire / Enderwire
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed for the Fysetc 5" DSI display which is usually much cheaper than the BTT equivalent.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 104
- Wydruki
- 2
- Wyświetlenia
- 411
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 2) (Komentarze: 11)Remiksy (1)Kolekcje (11)Powiązane
Purchased the Fysetc DSI display as it was much cheaper than the BTT one but found that it's a much slimmer display with the ribbon cable in the middle instead. Remixed to make it work for the Fysetc 5" DSI display.
Update: Added a variant for use with a stand for those using this screen on a different printer. Mount this without heatset inserts and insert M3 bolts from the screen mount side.
Display: https://www.aliexpress.us/item/3256806891297678.html