1 / 3
FYSETC Spider (All Versions) Stepper Fan Shroud
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple fan shroud for the Fysetc Spider Boards
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 88
- Wydruki
- 2
- Wyświetlenia
- 408
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (18)Powiązane
Available in 2 or 3 Fan variants, simply prints upside down and screws in using the original fixing points and longer (40mm) screws.
I designed this to be printed at .2 layer height, it requires 4x Heatset inserts per fan.
It was designed to actively cool the steppers, mostly for 5160 drivers that easily overheat.