Fysetc CNC Bed Stealth Front With NeoPixel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Want NeoPixel lights for your Fysetc CNC bed? You Got It!
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 89
- Wydruki
- 1
- Wyświetlenia
- 284
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
-UPDATED -
Wanting the Sweet CNC bed from Fysetc but also wanting that Sweet Stealth Look on the front with the Voron Logo from Maple Leaf Makers?
Then you have come to the right place!
after originally adapting the stealth front to cover up the CNC bed front I thought it needed a splash of NeoPixel lighting to match the Kirigami version!
NOW UPDATED TO HAVE MORE ROOM FOR WIRES
This should now allow for 1.3 - 1.4mm OD wires to be used
Originally Remixed from the brilliant - Maple Leaf Makers
https://www.printables.com/model/408181-voron-v0-kirigami-stealth-bumper
I've adapted my design to now SQUEEZE in a NeoPixel
just remember to print the Diffuser part in a Translucent or Clear filament!
Also PLEASE NOTE, Due to the PROXIMITY of the CNC BED it will be NESSESARY to COVER the SOLDER JOINTS on the BACK of the NEOPIXEL with some POLYAMIDE TAPE to STOP any UNWANTED SHORT CIRCUITES!
I have laid all the model parts on a V0 bed so you can print with ease
Voron Print Setting
4 perimeters
5 top / bottom layers
40% infill
material - ABS / ASA
- BOM - You will need
2 off M3 Threaded Inserts
2 off M3x6 BHCS
1 off Neopixel (on round board)
small bit of Polyamide tape
it's great to have any feedback on my models as this just helps make them better for everyone!
Happy printing!