1 / 5
DSO-152 BNC Input Mount - Permanently fix the MCX-to-BNC connector to the scope
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The only accessory you need for a Fnirsi DSO-152. Mounts the included MCX-to-BNC connector to the scope.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 42
- Makes
- 0
- Views
- 204
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
You will need a piece of standard 3M VHB tape. This tape is typically about 1mm thick.
Simply stick the tape to the bottom of the finished print, and cut out the hole. Then check that your included MCX-to-BNC connector fits snugly into the part. It should be a very snug fit on the knurling of the adapter.
I had to press the BNC against a table to get it to fully seat. Refer to the photos to see how far it should go.