BTT S2DW Accelerometer Bed Mount for Input Shaper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mount for the BigTreeTech S2DW v1.0 board. Intended to be used as it is stuck to the printer bed.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 108
- Makes
- 0
- Views
- 322
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
The model should be printed somewhere on the bed where it does not interfere with the homing sequence (for exmaple front-left corner), and oriented as needed.
Do not remove from the build plate. Allow the bed to cool down and mount the board then measure resonances on Y axis.
Board should be mounted with the included M6 bolt and one of the washers on top.
Board used: BigTreeTech S2DW v1.0 (link)
Make sure your bed is leveled, preferrably with bed mesh leveling, to ensure the print sticks properly (you can additionally use some glue stick).