BTT S2DW Accelerometer Bed Mount for Input Shaper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount for the BigTreeTech S2DW v1.0 board. Intended to be used as it is stuck to the printer bed.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 108
- Wydruki
- 0
- Wyświetlenia
- 322
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The model should be printed somewhere on the bed where it does not interfere with the homing sequence (for exmaple front-left corner), and oriented as needed.
Do not remove from the build plate. Allow the bed to cool down and mount the board then measure resonances on Y axis.
Board should be mounted with the included M6 bolt and one of the washers on top.
Board used: BigTreeTech S2DW v1.0 (link)
Make sure your bed is leveled, preferrably with bed mesh leveling, to ensure the print sticks properly (you can additionally use some glue stick).