1 / 5
Blackstar ID.core V3 Power Input 2.1 x 5.5mm Conversion Bracket — image 1
1 / 5

Blackstar ID.core V3 Power Input 2.1 x 5.5mm Conversion Bracket

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Bracket to aid in converting the amp to a more common 2.1mm inner diameter barrel jack input (comes with a 2.5mm).

Rating
0 / 5
Likes
0
Downloads
5
Makes
0
Views
45
Reviews
0

Updated at source:

Model information

Category
Audio
License
Creative Commons — Public Domain

Hi, I decided to convert my Blackstar Core ID.3 to use a 12v barrel jack with the smaller 2.1mm inner diameter.  The input provided is a 5.5mm x 2.5mm, but the smaller one seems more common and is what came with the battery pack I bought.  One of the pictures shows the mk1 I made, where I failed to notice the offset of the backend of the stock plug (the actual jack is centered on that one on the front side, which is what I was measuring).  In any event, I needed to increase the diameter for the pigtail to fit anyway so I reworked it rather than drilling out the hole to shift it 2mm.

I used CA (super glue) to secure the pigtail to the bracket.  Alternatively, you could drill a small hole and secure w/ a set screw.

I'm not sure if this fits other versions of the amp, but most likely will.  I think the main change to the v4 was the use of usb c vs. mini b.

I printed with PLA, 100% infill.  Seems plenty strong for the application.

Tags