Blackstar ID.core V3 Power Input 2.1 x 5.5mm Conversion Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket to aid in converting the amp to a more common 2.1mm inner diameter barrel jack input (comes with a 2.5mm).
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Public Domain
Hi, I decided to convert my Blackstar Core ID.3 to use a 12v barrel jack with the smaller 2.1mm inner diameter. The input provided is a 5.5mm x 2.5mm, but the smaller one seems more common and is what came with the battery pack I bought. One of the pictures shows the mk1 I made, where I failed to notice the offset of the backend of the stock plug (the actual jack is centered on that one on the front side, which is what I was measuring). In any event, I needed to increase the diameter for the pigtail to fit anyway so I reworked it rather than drilling out the hole to shift it 2mm.
I used CA (super glue) to secure the pigtail to the bracket. Alternatively, you could drill a small hole and secure w/ a set screw.
I'm not sure if this fits other versions of the amp, but most likely will. I think the main change to the v4 was the use of usb c vs. mini b.
I printed with PLA, 100% infill. Seems plenty strong for the application.