Liczymy pasujące modele…
2 Color Model for face-down multicolor printing + Model with color change @2.0mm for single-color printers. Note for single-color Bambu Printers- You MUST change the COLOR CHANGE to a PAUSE or it will skip it. (Pictured Right) I recommend…
2 Color Model for face-down multicolor printing + Model with color change @2.0mm for single-color printers. Note for single-color Bambu Printers- You MUST change the COLOR CHANGE to a PAUSE or it will skip it. (Pictured Right) I recommend…
2 Color Model for face-down multicolor printing + Model with color change @2.0mm for single-color printers. Note for single-color Bambu Printers- You MUST change the COLOR CHANGE to a PAUSE or it will skip it. (Pictured Right) I recommend…
The Fosi Audio V3 Mono is an incredible piece of engineering, but it uses its entire aluminum chassis to dissipate heat. When sitting flat on a desk or stacked, airflow to the bottom of the unit is restricted. This stand helps solve the…
OneUp V3 Dropper Upper Bushing replacement part. Printed with PETG, brim and 0.15 layer height.
I made this modification so that the printer would take up less space on the shelf. Printed with support for the display locks only.
A commercial license for the Cat Planter V3 Only, which includes the single and also multicolor version
Add some storage to your V3SE/KE, for the drawers you can have either 2 thin drawers or one big drawer per side.
Imprimir con 100% de relleno. Altura de capa 0,16 para mejor acabado. Color negro para que quede mejor en la impresora 3D.
I made some modifications to the screen holder from this project https://www.printables.com/model/862834-guppy-screen-display-holder-for-creality-ender-3-v to allow access to the USB port.
I really liked the original ESRack system design created by @EvilProphet . I create my own support for GPON Terminal Huawei HG8010Hv3 from the Blank Module and share it here You can put the Huawei HG8010Hv3 on 2 side (connecting on front…
I bought a filiment dryer and made this to direct the filiment straight through to the print head Printed it without any supports 8% infill 3 walls
I thought @t4obrien's case needed a little extra on the front so I added some grooves to break the surface a bit. For all other files please go to the original model and download from there.
Travel Telescope Discord server Hardware kits available for purchase Introducing the Travel Telescope 3.0, a completely redesigned iteration of the Travel Telescope. It’s the perfect companion for your next dark-sky adventure and can…
I use a side spool holder and I didn't like the filament guides I found online, so I made my own. The two brackets, one for the side, and one to go above the run-out sensor, take one of two modular pieces that can either hold this Amazon…
Heltec WiFi LoRa 32(V3) Command Center This is a 3D printed case for the Heltec V3 WiFi LoRa 32 dev-board commonly used for Meshtastic. This extra-large case was designed to be versatile, rugged and have ample space inside for whatever…
This custom-designed silicon tube stopper features a unique spike in the center, making it an ideal tool for both sealing and cleaning tubes. The spike assists in dislodging debris and ensuring the inside of the tube remains clear, while…
Bender's bigger, badder brother is here! Meet Flexo, the most flexible Meshtastic powered node "case kit" available… and its FREE to print! Check out the intro video HERE and the teardown video HERE . ***ASSEMBLY VIDEO NOW LIVE CLICK…
Filament : Prusament petg. PETG 0.20mm. 15% Infill : Gyroid. Nozzle : 230c. Bed : 85c. Support : None. Enable Ironining. All top.
Hi guys, We all must give BIG THANKS TO Justin Fritz because he was the person who asked me and helped me a lot to make this model together. I don't have the latest revision of the K1 MAX, but with the help of his tape measure and a few…
Hi everyone! 😊 Due to popular demand, I decided to design my own enclosure for the Bigtreetech TFT 35 V3.0 display. This box supports the standard display emulation included with the printer and can switch to touch screen mode. I’ll be…
An AF Nikkor 24 rim protector with 52mm filter thread v3 for protecting the lens glass on this lens. On my lens the filter thread had sheered off leaving the convex part of glass lens exposed to scratches if placed glass downwards. Also I…
It's me again! After some further feedback about my original mechanical iris and its version 2, I have now added two handles, which make it much easier and more convenient to operate the mechanism. The wider tolerances stayed the same as…
Third Update: Changed the gem a third time to something a bit more accurate Adjusted the peg sizes again Made the hilt shorter
I needed to lower the spool holder on my printer to clear the cupboard above it, so I made this. It's a copy of the original design, but much shorter. I don't think it will be compatible with runout sensor
Reoriented Y mount to maintain accel orientation
camera mount for ender 3 v3 se/ke for creality crcc-s7 camera that comes with the creality box 2. requires no supports or any other special instructions and attaches the ¼ printable camera screws available.
Welcome! Welcome to Revision 3 of my versatile, DIY helping hands! These models were entirely reworked for improved flexibility, fewer fasteners, and enhanced functionality. It is not compatible with previous revisions but offers a more…
As simple as praticle. All tools can be reversed. History : • 2024/12/23 : Return of the “FaucetAeratorDriver” but redesigned • 2024/12/05 : v3 is a contest update, smaller tolerance and new designs to reduce amount of material even more…
Materiał z którego zalecam wykonanie to PETG, dla lepszej wytrzymałości Ociekacz na sztućce, o wymiarach. Jeśli ktoś potrzebuję mniejszego polecam po prostu przeskalować na wymiar jaki komu pasuje w slicerze drukarki. Pozdrawiam. Wysokość…
Case that fits an Arduino UNO with the CNC Shield V3 and a 60mm cooling fan. The top part just snaps in place and is easy to remove to get to the arduino underneath. The fan is mounted with two screws from the bottom.
Combination of dome and the large knob for the SpaceMouse Mini v3 so you only have to print one piece and save 4 screws.
No pude encontrar un portaherramientas que realmente me gustara, así que hice la remezcla quitando las ranuras para tarjetas SD y agregando espacio para un calibrador digital.
This one sits a little higher and comes forward a little to align with the extruder. It also looks nice.
Понравился дизайн,переделал для Ender 3v3, тем более для этого принтера вовсе нет никаких крышек,а моя сломалась... Скрестил оригинал и от k1.
LID RISER V3 [FRAME EXTENSION KIT] | Vents | LED Strip | Hinges *If you have any issues with printing or assembly, feel free to message me, and I'll do my best to assist you 😉. /////ATTENTION *Because of the seam inside the walls, the…
If like me you buyed an a older version, you may noted that is a little more large than the printer, here is the fix
Thanks @ROPI_326473 for share this cool projekt! Added a press-in tool wherein a magnet is pressed in to get all the magnet mounted always in the same direction! The tool is used after that to only press in all magnets from top sided the…
Keycap for Razer Ornata V3. Print in 0,1mm, organic supports, 45° for stronger print.
Falcon2 Pro Collection This is a bracket to hold a Wyze V4 or V4 camera($20-30 off Amazon) in place to observe your cutter remotely. The Wyze software to view your camera is free. I wanted a way to keep an eye on my cutting while in other…
Parts needed: A Heltec LoRa 32 V3 board 2x M3x14 bolts 2x M3 nuts
I uploaded this model so other people don't have to waste an hour printing just to find out that it doesn't fit at all. I tested it as shown in pics. Works 100% with WMVos 's side mount:…
I originally modified this Multiboard Holster for my personal muzi.works H1 Heltec V3 setup to make charging my Heltec V3 more convenient.
The Rogue Echo Bike rushes a lot of wind in your face. The Wind Guard redirects the wind blast, making the workout even better. Included are low, medium and tall profile designs. Choose the lower profile model, to get a slight breeze by…
V3 model. I realized it is similar to many popular models so I turned it sideways and added slightly larger holes for the keychain as well as a large indent to keep the key ring form getting stuck when trying to pull out the key chain.…
Welcome! Welcome to Revision 3 of my versatile, DIY helping hands. I reworked the CAD, allowed for more fasteners, and added new clamps. Every part changed some. You can find an up-to-date list of SuperMod designs here:…
Mounting adapter plate to allow the BTT RaspberryPad5, 3D printed backplate to mount to the original Ender 3 V3 SE screen mounting bracket peg interface. This allows you to mount your Klipper host running KlipperScreen (or anything using…
This reinforced gantry support effectively eliminates wobble in the printer's Z axis. It is designed and tested on the C
side tray for the righ-hand side of the Ender 3 V3 SE. Clips on at the back loosly so easy to remove.
if you have problem with your build plate being to low on your build plate you can add these spacers to make the bed higher i printed this for my creality ender 3 v3 se and depending on printer and printer settings its around 0.5mm spacer.
v3 replacement cd holder for 95-05 gm vehicles. it's for people that don't use CDs and want to use the space for something else like put your favorite stuffed animal monkey or your tools for your secret talent of lock picking. this is…
An upgrade on the DoorStop by @Syd_334291. Optimised for larger gaps and thicker carpets
Just need a replacement? This is as simple as it gets.
Universal Webcam & Cutter Holder Bed Mount for Ender 3 V3 KE This is a remixed and optimized bed-mounted camera mount for the Ender 3 V3 KE , designed to capture better time-lapses while adding extra functionality. 🔹 Features &…
You can mount it on the highest point of the printer or the lowest. (You can find example in the pictures.) Please print it at higher infill, so it doesn't snap off. (I recommend 30%+ infill.) I also recommend printing it at slower speeds…
Easy to print, less filament, and works great! Same concept, all with less filament, and same functionality!
The model allows to mount a microphone at the hole of a Cajon. The holder has a mounting position for. Due to the long arms, there is a support ring, that stiffens the arms. I attached felt gliders at the claws (see pictures) to get a…
A friend asked me to model a battery plate for his AIWA discman. In case anyone is looking for the same replacement part. Model XP-V310. I recommend printing in a vertical orientation. it will require supports Did you like this project?…
The Daylight on a Stick XXL from the Mellow AliExpress store has closer holes (285mm spacing) and connectors. This design is based off the V3 design ( Daylight Stick XXL Carrier V3.stl) with M3 brass inserts. I have moved the holes to the…
NB I made an update on the original so it does not hit the brush when you do a auto bed level. Now this part G1 X87 Y-16 Z4 F5000.0 ;Wipe 1G1 X46 Y-16 Z4 F5000.0 ;Wipe 2 G1 X87 Y-16 Z4 F5000.0 ;Wipe 3 G1 X46 Y-16 Z4 F5000.0 ;Wipe 4 G1 X87…
This object is designed to be printed in place. The hinge is strong and has a tolerance of 0.4 mm. Once folded, it's clipped and will stay closed. 2026/04/08 : v3.1 is a highly optimized version with small tolerances (0.25 mm), thus…
I purchased a LoRa module from Amazon to get started learning about Meshtastic, and I realized after receiving it that I needed an enclosure for it. I didn't realize how easy it would be to set up. I would assume if you're here you…
Filament cutter adapted for the sapphire plus v3 (Work in progress). Fits TwoTrees Sapphire Plus v3 only. Video of how it works. A detail to take into account, the filament cutter sacrifices a little bit of printing area to cut, it is not…
With this bracket, you can mount the Raspberry Pi Camera Module V3 onto a surface. Initially designed for the Pironman5 case . ------ SunFounder Pironman 5 is an advanced mini PC case designed specifically for the Raspberry Pi 5. It not…
E N G L I S H This is a modular, tool-free, plug-in arm for a webcam for the Creality Ender3 V3 KE and printers with the identical Z-axis. No screws or glue are required. The holder is clamped onto the right-hand Z-axis cover and then…
E N G L I S H Repair kit for broken wing mirrors on the Renault Twizy If the door stop rubbers are worn, the wing mirror hits the mudguard and the ring-shaped bracket inside breaks. This repair kit contains a TPU spring element, as the…
Daniel BP's Raspbery camera stand is a nice design and now can be used to house the V3 Raspberry Pi camera
SD card dust cover. Fits on Ender 3 v3 SE. or any other model or device that has a sd card slot.
For V3 Lowriders that have their electronics mounted off the gantry and are running a towline for cable management. For up to 1" cord protective wraps. Requires a flat plane to mount to.
NOT FINISHED, STILL UPDATES TO COME THIS PROJECT HAS BEEN ABONDANED BY ME, AS THERE IS ALREADY ONE POSTED BY SOMEONE ELSE. STEP FILES ARE INCLUDED filament cutter for MMU, still not finished and tested yet using a piece of filament for…
🔄 Changelog Update 20.05.2025 Added support for servo stopper : new file Servo_Stop v1.stl , instructions below. Update 13.04.2025 Increased the width of Lever Pusher by 1 mm to prevent it from falling out during operation. This should…
check the original model for print directions. I'm gonna be honest, I'm too lazy to copy and paste them. It's also so you can give his model views aswell
I made the side PTFE mount longer, so the PTFE tube is directly above the spool.
I used canopy model from GrabCad and tinkered simple mount for GPS. I used black PETG till layer 86, paused, changed filament to TPU, reduced temperature and printer the upper part with it. Came out nicely. But it can be fully printed…
How to use the 'All Files' choice "Download All Files" gets everything — including the .3mf file — named " ad5m-minimal-enclosure-by-design8studio-for-orcaslicer-230.3mf " — which is an OrcaSlicer project file , containing multiple print…
Where did I put those snips…? With this side mounted storage box, you can finally keep your tools all organised and together, right at your printer's side.
I was in need of an enclosure for my LED Controller and couldn't find anything that matched this particular device. I've seen them out in the wild before so I'm sharing my work for those that also use this cheap yet effective device.…
Allows to use Guppy screen with a side mounted display. Prints good with tree supports. Changelog: V2 - made it more compact and pretty. Also changed the angle a little and it's now compatible with the Storage Boxes . Also easier to…
UPDATE 16.05.2025: Some files were corrupted. These have been updated now.
This 3D printable model is a chain link-style cable cover designed specifically for the Ender 3 V3 SE 3D printer. It organizes and protects the cables—typically for the print head or bed—by encasing them in a flexible, snap-together…
I have 605080 battery (idk if its a standart size), i remixed it accordingly
Printed with PETG with .1 layer height. The MAG Alignment in Betaflight should be set to CW 90° in the config tab. But also confirm that the compass points the right direction in the setup tab.
Bracket design on tinkercad to hold outage sensor from Creality. Reuses the orignal screws. Bracket can be used with bowden tube or without. There is holes drilled but no threads in the hole. I used 6mm fitting on top of bracket. For the…
Remix of a other design. Added material to the back side of the clipping area. I angled the tab on the end. It still prints the 10mm treads for a pass thru bowden tube fitting.
It covers your screen to protect it from dust. Printed with 15% infill and Hilbert Curve for the top layer to give it a nice finish.
Magnetic Corner Mount Case for Raspberry Pi Camera Module 3 (Standard & Wide Angle) This is a custom magnetic case designed for the Raspberry Pi Camera Module 3 — compatible with both the standard and wide-angle versions. It mounts neatly…
Razor Blackwidow V3 Quartz keyboard foot. Made is since there were no free models available for the Quartz version of the blackwidow V3. Despite the license, I don't mind any remixes. I just want to bar commercial use. Edit: 22/6/2025…
Motivation The third iteration of a bottle cage that can hold relatively tall bottles and is relatively lightweight. I found that the previous version often had a lot of bulging seams and zits which could scratch my bottles, so I wanted…
2 gram print. 1.2 layers, 0.4 tip, 3 line wall, 20% infill. 2mm heat sets. Flip the stock duct around so the fan sucks from above and install with 2mm screws and nuts.
This is for the storage of the tools that come with the Ender 3 V3 Core XZ printer. This will hold all regular tools that are needed to service the machine as well as the Creality spatula print. These are the tools that are needed to be…
I've acquired a few Ender 3 V3's and am pretty happy with them. Have a grand picture in my head of all the mods I'd like to do. I couldn't find a CAD model good enough for my plan so I am making my own. I've got more parts in the works,…
I wanted a compact case to house a Heltec V3 and an 18650 battery. I was unable to find one I liked, so I designed one. This was designed in OnShape if you would like to make some alterations. Features Changeable faceplate Battery Kill…
My Ender V3 SE's gantry was completely out of whack. maybe 92° leaning to the back. So I looked for solutions. I did not find one I liked. It took me about a week to design and test this. The braces fit precisely to the Ender's plastic…
this just a simple shelf I made, its the 3rd version of the design, if anyone would like to remix it they can. it should be printed with 5% infill and 3 to 4 walls.
depending on your printer you may need to add tree support to the under edge of the dosing capsule holder area. via paint on supports. v2 wont need supports really. i have added a v2 version after printing i found it was a bit tight for…
The picture shows a PTFE tube attached along which the filament is brought from the spool holders below the printer. On the other side of the printer, I run the LED light cable up along the cable rail. Two different versions for both…
![Faucet Aerator Wrench & Tools v3 [24 mm]](https://media.printables.com/media/prints/1094252/images/8449547_939697b7-9971-4c40-baec-6d48fe32a572_18e6f731-c9f2-44ff-9f79-f4303836602e/preview_v3.jpg)
![CREALITY K1 MAX - LID RISER V3 [FRAME EXTENSION KIT]](https://media.printables.com/media/prints/1113589/images/8603616_60a7f138-6ba6-4188-bbf6-cdb880ec998a_f4300ca9-7596-4f4e-9ef3-f72931737ef2/k1max_projects_covers.jpg)
![[REMIX] Xacto OTF Keychain mini V3.0](https://media.printables.com/media/prints/3aadbecf-62d3-4605-8569-0459c62afbf4/images/9674904_6a377821-e844-48d4-bb49-119ae7b8ce75_075f36fc-d66e-40c0-9199-dbf7b0056f67/bildschirmfoto_4-5-2025_163648_mediaprintablescom.jpeg)
