Spine Cable Chain - Ender 3 V3 KE/SE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A full-featured solution for managing the cables on your Ender 3 V3 KE or SE.
- Ocena
- 4,479 / 5
- Polubienia
- 929
- Pobrania
- 6214
- Wydruki
- 55
- Wyświetlenia
- 27 887
- Oceny
- 48
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my take on a spine style cable chain for the Ender 3 V3 KE/SE. I was going for a very specific "look," and I think I've achieved it.
I've designed components for all the various mounting points.
There are three mounts for the main cable coming out of the tool head: one for the tool head, one for the base, and a bridge for the X-axis gap.
For the bed cable, there are 2 mounts: The clamp for the bed and a mount for the backside base of the printer.
You'll need 2 M3 screws and nuts to secure it. I originally had clips designed but prefer it clamped down hard - so I opted for these. Length doesn't really matter. It won't touch anything.
Join my discord! https://discord.gg/uYBuFXUmcU
Everything in this project can be printed without supports except the bed cable base mount. This should be printed, as shown in the picture below, with a small support painted on for the ball joint.
You will need to print:
- 46 Main Links - This can be any combination of the “Standard” Mount + The zip tie or claw variants. Those are optional but handy if you have some extra wiring to hide.
- 20 Bed Chain Links
- 1 of each of the various mount
I recommend printing everything with variable layer height. It really helps with the overhangs.
Print Settings:
- Lots of walls
Thats it! Please enjoy!