Liczymy pasujące modele…
I wanted to make a Mimic version of the CORE One long time ago (almost as soon as the printer was released) but the project was quickly replaced by others and was almost forgotten. The "Skin" contest was a good opportunity to start over…
I like the modular design of FilarworKs Master Spool, but for me it was lacking some features. I wanted an area to stick a label to without it being unsupported at large portions My refill-filament was too wide for the standard…
Very good instructions from Dave Wilson. Thank you. https://www.printables.com/make/2339640?comment_id=2339640
An enclosed mount for a Nitecore TUP flashlight for picatinny rails. Ideal for airsoft pistol. All controls, screen and charging port are exposed so that you don't have to remove it every time.
Printed in PETG with a 0.8 mm nozzle. The .3mf file includes modifiers to increase the density and the thickness of the vertical walls. Wahoo KICKR Core 2 version:
This protects the wires from the Z motors on a ratrig v-core as they enter the electrical compartment. These wires run on the bottom of the 3030 extrusion at the bottom of the machine and can easily snag on something while moving the…
…Please be sure to hit like & post a make, I'd love to see your prints! WARNING! If you do not know how to wire this system correctly & safely I STRONGLY recommend you DO NOT attempt to print or use this model as you are dealing with…
A Prusa gyorsulásmérő doboz könnyen nyomtatható. A fedél kétféleképpen készíthető, felirattal vagy anélkül.
Sturdier RatRig 4 VCore Front Clamp with more clamping force
This is my LED Daylight Holder to mount it under the extrusion for my RatRig VCore4, but it could also used for other printer like Voron and so on. I used the Vector3D LED Stripe. I made and used it for my V-Core 4 with full closed…
Didn't see many good options for this type of scoreboard out there so decided to make my own. I wanted it to be sturdy yet still fully printable. So this is my design… Updated to V2: improved number cards and rings, and now no longer…
NEW VERSION - CR-10(S) NG v1.2 has been released! THIS IS CURRENTLY INCOMPLETE, CHECK THE CHANGELOG BELOW CR-10 NG beta - coreXY conversion This printer is based off of the Ender 3 NG beta v1.1. Supports CR-10 and CR-10S. PRINTER OVERVIEW…
Get ready to elevate your storage game with the Prusa Core One Organizer Box ! 🚀 Inspired by the sleek and modern design of the Prusa Core One 3D printer, this box is as functional as it is stylish. ✨ Features you’ll love: 🔗 Custom Lid…
Welcome Light up your next adventure with the LightCore Ranger , a remix of Dummy 13 ! New features include mounts for 5mm LEDs in the forearms and head, and a backpack that stores a coin cell battery. Follow the same assembly and…
I like the modular design of FilarworKs Master Spool, but for me it was lacking some features. I wanted an area to stick a label to without it being unsupported at large portions My refill-filament was too wide for the standard…
This is a case to hold omnidirectional antennas and protect them while not in use. The case was designed around the TrueRC CORE 5.8ghz 125mm omnidirectional antenna pair. It uses four 8mmx2mm magnets for retention, but you could omit…
The toolhead mount now has the hole profile for a stealthburner and i also added holes for threaded inserts on the top so I can mount an adxl345 accelerometer
Route the ethernet cable via the bottom hole up the middle extrusion in the back into the electronics box. Connector used: https://www.amazon.nl/-/en/dp/B07NJ5XNMN
I created this model by hand using Blender 3D, with the help of two reference images! Also, yes, you are definitely free to modify this model... just do not sell it online, only in real life, as a toy or model, etc.
The design intent was to be able to print parts in different colors to make painting a non-required step. I printed the 2 main body components in a seam-down orientation with a brim and supports at the bottom. This way, most of the…
This is merged core for Stealth Press 1S, for those having big size printers like Prusa XL and willing to print all in once. You can review and download full Stealth Press 1S — heat set insert press project here.
To reduce the chances of forgetting the spare Petzl Core in the pocket of my running shorts and having it ultimately end up in the washing machine, I've designed this little case that can be attached to all sorts of things – for example,…
https://github.com/92sho16/RigidCORE This is a minor remix of Jordan's work (https://www.printables.com/model/983693-corexy-conversion-for-rigidbot-3d-printer-core-xy). I wanted to use a more commonly used x carriage so I remixed the y…
Demon Core Experiment, I designed based off pictures, so assuming not to any sort of scale. name plate is designed as second part so you can do a manual color change The “Core” is a 3" Inch Chrome Steel Bearing Ball i got from amazon…
2kg Spool Holder for Core One I would recommend printing it with PETG and using at least 4 perimeters to ensure it is sturdy enough. It should be assembled with 4xM3 screws. The model was designed according to:…
Print instructions Download the latest PrusaSlicer and use the following settings**: Print settings: 0.20mm STRUCTUAL Filament: PETG, PC and PCCF (tested on Prusament) 15% Grid infill ** Note that print settings are recommended, but you…
Video Series Link: This is my entire Daedalus Upgrade project that I've been working on for the past 4-5 months. I've uploaded all of my files here for you to embark on this journey if you'd like or take parts of my build and make it into…
OUTDATED VERSION This version is no longer maintained. Please use the current Duender Project: Printables: https://www.printables.com/model/1798903-duender-project-ender-3-to-corexy-conversion https://irbis3d.xyz/ GitHub:…
Introduction This is a conversion from H-bot to coreXY for the ExtruH plotter which I designed a while back Is it better? No , although it is different Does it look cooler? Arguably , your mileage may vary Should you print it? Probably…
Hot air can leak through the vents when printing at high chamber temperatures like ABS/ASA. This simple cover helps prevent escaping air. Uses 4 6x3 magnets. I added step file, so you can change it to fit other (bigger) magnets.…
A dock to go with Ratrig toolhead beta2 and the front piece and mount in https://www.printables.com/model/963737-mount-for-euclid-probe-and-a-new-front-for-ratrig. The dock is now thicker, so that the lead screw bearing actually reaches…
This aero-engine model was created in-house to demonstrate the capabilities of the Prusa CORE One and is set as its title model. It is printable completely without supports . This model is also featured on the box your CORE One came in.
Powerbox Systems offers a softbag for their Core/Atom radio transmitters. The softbag has a foam insert with a number of recesses in which smaller accessories can be stored. The inserts provided here fit exactly into these recesses and…
Update log at the end of description INTRODUCTION: This mod involves adding a dry box on the right side of the printer. I decided to make my one as I wanted it be printable on the actual bed size of CORE One printer. I can't garantee it…
I recommend using balls with blue dot; they are the hardest. ACCESSORIES Prusa CoreOne/+ You will need 4 M3x6MM screws to fix them to the lower frame; this one has 4 threaded holes in each of the 4 corners as standard. Prusa CoreOneL You…
This design replaces the original Prusa Core One Wifi cover. In a single cover it combines the Wifi and the GPIO interface. ACCESSORIES This part is secured with the original M10 SHCS screw The GPIO card is secured with 4 x M3x6mm SHCS…
Update 3/3/26: These retractors last around a 1000hrs of print time before the winding mechanism fails. The stock piano wire broke at the extruder, so I needed something to hold the umbilical up and out of the belts / print. Simple…
Attention! If you have a Prusa XL, you'll want to check out my new loader that mounts to the frame and is always at the ready: Also, be sure to check out the remixes for some great optional parts! No XL? How about Core One INDX? About…
This is a remix of @Raymond's ‘ Hygrometer house for Prusa Core One’ but instead of using the 20x5x2mm or 20x6x2mm magnets this uses (up to*) four 6x2.5mm round magnets (other magnets will work as well, like 2-3mm in height is confirmed…
Update - June 14 2025 Hello everyone, I've updated the model to V2. Based on the feedback I received, I've adjusted the mount so that three M3x10 screws now hold each foot instead of one. This also changed the appearance, but the same…
Maturity Very Good. 4 prototypes. In use since 2025/03. Hardware PTFE tube OD 4mm L118 x2. You may insert AxeRigideIntTubePTFE-r00a - d2.8-l118 in it to avoid the PTFE to flatten too much. In that case you need a ID 3mm PTFE tube.…
These accessories prevent dust or pieces of filament from getting stuck in the Z axis and under the side covers. The shoulders of the PrusaCoreOne_DP_ZAxe.stl files must be directed downwards; they enter the holes in the platform. Two…
Insert a 6x2mm magnet and use with zip ties commonly shipped with Prusa printers (2.5mm width) Printed in PETG
Addition of the following sizes: 19.5 mm spacing for nightingale wheels 25 mm spacing for Traceur Wheels 40mm spacing with slightly lower vents for 132 size motors (Worker NEO intended) 40mm spacing with lower vents for 180 size motors…
The adaptor plates allow you to mount the Vevor casters (2 inch, GD60FD) to your RatRig V-Core 4 500. They allow for clearance on the front Z stepper motors. I used an M8 to M6 sleeve reducing nut to screw into the M8 threads on the…
Ein Halter für den Innenraum des Core One der nicht im Weg ist, aber wenn nötig auch schnell entfernt werden kann. Benötigt wird: 2 Magneten (Durchmesser 6 mm, Stärke 3 mm)…
“How much air filtration do you want?” - “Yes” ------------------------------------------------------------------------------------ Giant Bagpack Airfilter for the PRUSA CoreOne using 250x370 mm IKEA FÖRNUFTIG HEPA- & Carbon-Filters (18…
Easily mount your UniFi G3 / G4 / G6 magnetically into the corner of your Core One, just like the Buddy3D camera. Requires 6x 10x5x2mm neodymium magnets, and uses the ¼" bolt from the “foot” that comes in the box with the camera, so no…
FDMecha Hex Terrain is a tabletop terrain system for hex-grid sci-fi mech gaming, made to play well and look great right off the printer. Tiles are designed in a "mid-poly" style that works at a variety of scales, reads clearly for…
I want to pre-sort the parts for my Core One kit before I start assembly. Therefore, I copied the components from the assembly instructions into a single document. The parts are sorted by construction steps and also by package. This…
A tool holder magnetically attached to the side of the Prusa Core One printer, which contains all the printer's tools plus space for four nozzles. It is fixed with 2pcs 50x10x3 neodymium magnets. (V1) I added a V2 version, larger than the…
Update: Please don’t print this in PETG . It’s too flexible , which makes the “legs” spread apart, and it’s also too soft , so the first layer/edge gets damaged quickly with repeated use. If you choose not to follow these recommendations,…
I noticed that when printing with ASA filament, it takes more than 20 minutes to heat the chamber to 55°C. That's why I decided to make an adapter mounted in the top vent grille so that you can raise the temperature faster with a hair…
Hermes is an easy to deploy external node enclosure, version 2.0 now supports the RAKWireless 19007/19003 and HeltecV3/V4 (with MPPT solar controller!). It enables you to deploy external nodes for MeshCore or Meshtastic (or others!)…
This is a remix of the Core One Snap Rivet Remover with magnets by Magmabow. Following original tolerances, I enlarged the internal diameters from 4x2mm to 6x2mm to accommodate the size of magnets used in the Gridfinity system
I wanted to utilize the Core One left recess to store a print sheets and a box with 3d print accessories. I found the “Ikea”-alike the original scandis mod solution useful as it can be easily extended and modified. I created side mounts…
So easy that you can do it with one hand! Heyy you, are you tired of missing the filament hole on your CORE one? Well.. i know that i am, so i made this quick to print attachment that you can print under 6 minutes at 100% Or if you're a…
I designed this 4-bar-linkage Hinge, to have the Doors of my Vcore4 400 fold outward to the side of the printer in a controlled way. I’m using 6mm PC Panels for the door, and 6mm ACM + 8mm Insulation for the Sidepanels. I also added a DXF…
My result isn't perfect by far but a fun project nonetheless. Not going to make another one anytime soon ;)
I had always planned to use my Core One with legs and place a tabletop on it, turning it into a functional table. Because of this setup, top intake was no longer an option, so a side intake system became essential. This design can be…
A simple BLtouch mount for the ender 5 Corexy mod with a e3d v6 revo hotend
OUTDATED VERSION This version is no longer maintained. Please use the current Duender Project: Printables: https://www.printables.com/model/1798903-duender-project-ender-3-to-corexy-conversion https://irbis3d.xyz/ GitHub:…
Revision to base and top clamps to allow better clearance for 608 bearings
Instead of the original zipper, I designed a clip for the swing arm to attach the wire and PTFE tube. Four pieces need to be printed, the models are numbered: one piece of the one, two of the two and one of the three. I printed it out of…
This bracket is designed around these affordable HEPA filters https://www.amazon.com/dp/B0DMCKKJWZ? The bracket allows the filter to stick out so they can be easily removed/replaced. Supports required for the center fin separating the…
A remixed variant without pockets and text for easy customization.
I wanted a simple model of the filament door to Prusa Core One, design-wise in direction of the front door. NB: this is the very first prototype and needs several improvements, see below. There are several models for filament door…
Update: Due to the interest in this model I made some aesthetic updates (to make it more readable) in addition to shaving off 0.15mm of thickness (which puts the gauge nearer to the center when the belts are adjusted properly). If you are…
Magnetic Corner Mount Case for Raspberry Pi Camera Module 3 (Standard & Wide Angle) This is a custom magnetic case designed for the Raspberry Pi Camera Module 3 — compatible with both the standard and wide-angle versions. It mounts neatly…
English: Spool Holder with Filament Guide and Bottom Buffer for Prusa MMU3 This is a compact and functional spool holder with a filament guide and bottom buffer for use with Prusa MMU3. The design combines a stable spool mount with a…
/!\/!\/!\ Warning, it use 230V, sou can die if you don't know what you do. I can't be responsible if you do this mod wihtout knowing what you are doing/!\/!\/!\ You must check with your insurance if you won't have problems in case of…
This is a deeper tray that fits the bottom slot of the 3-part storage box. The cut-outs only make it fit the bottom-most position. It will not fit in another slot! I personally use it for tools and parts that I don't need that often. The…
SprintCore is a futuristic running shoe concept designed for 3D printing. With its bold geometric structure and layered sole, it's ideal for summer wear, urban exploration, or as a creative TPU-based experiment. The open design ensures…
Refer to the original post for further model details.
You want to simply improve the WiFi reception of your Prusa Core One ? you're at the right place ! Prusa Core One Wi-Fi module Back-Cover + Stand or Magnetic My Prusa Core One couldn't catch the Wi-Fi signal in my cellar, so I moved the…
Hey all, Here is my remix on the Prusa CORE One MMU3 Community version von Prusa Guy and combine it with the incredible MMU3 / MMU2S 5 Spools auto rewinder adapter for (un)original Prusa drybox / Repbox von Sanka . I really like the MMU3…
Print sheet rack for Prusa CORE One designed to hold four sheets Pictured: Filament: Prusament PETG Prusa Orange Preset: 0.25mm STRUCTURAL Infill: 30% Adaptive Cubic
This is for the storage of the tools that come with the Ender 3 V3 Core XZ printer. This will hold all regular tools that are needed to service the machine as well as the Creality spatula print. These are the tools that are needed to be…
Print instructions: Download the latest PrusaSlicer and use the following settings*: Print settings: 0.20mm STRUCTUAL Filament: PETG (tested on Prusament) 15% Grid infill Additional parts required: 12x Magnets 20x6x2mm or Magnets 20x6x2mm…
The original PSU terminal cover is too tall and very tight fitting. It is very hard to remove since there is nothing to hold on to. This is a very simple remix of of the original “C1 PSU COVER R1.stl” to reduce the height by 0.8 mm for…
Prevents dust and filament debris from entering the Z-axis holes, protecting the mechanism. Three guards are required per printer. If printed in a textured sheet, the guard is almost invisible. Key Features: Protects Z-axis: Prevents dust…
Printer Custom G-Code for the nozzle wiper: ; ; Wipe nozzle ; G0 X82 Y-16 Z3 F8000 G0 Z1 G0 X40 G0 Y-13.5 G0 X82 G0 Y-10 G0 X76.8 G0 Y-16 G0 X71.5 G0 Y-10 G0 X66.2 G0 Y-16 G0 X61 G0 Y-10 G0 X56 G0 Y-16 G0 X50.8 G0 Y-10 G0 X45.5 G0 Y-16 G0…
⭐ Love the GEN2 system? Support the project by joining the Jerrari Club or picking up a premium faceplate collection , it means a lot and helps fuel future designs. 2H FEET NOW AVAILABLE 02/06/2026 - 2H feet added, this increases the…
Designed and tested to fit on this model of flashlight only. Others might fit also. You only need two tie wraps to fasten it to the handle bar. The mount holds the flahslight tight and you can remove it from the mount with a bit of force…
Provides a place to add attachments to the Core of the Lowrider V4. Like a drag chain or vacuum tube mount.
Just a few new parts to modify the original COREBOXX Premium setup: Wheel Sleeve : Looks and works better than the rubber band solution. To be printed in TPU with “Fuzzy Skin” in “Vase Mode”. Rewinder Mount : This mount provides more…
Merged Sherpa Micro - ECAS + Switch, with Sherpa Micro R2RC2 housing_core_x1_rev8.stl which accepts the RIDGA v2 gear. Prints flat on buildplate without supports.
Description Print instructions Download the latest PrusaSlicer and use the following settings**: Print settings: 0.20mm STRUCTUAL Filament: PCCF (tested on Prusament) - please remember that when printing from PCCF, you need a hardened…
I really didn't like the handles on my Ikea Rakke, then I saw the CoreOne and knew that I need to do this. Print recommendations: Print them vertically with supports just on the “middle” part. I also used a brim for better adhesion. For…
Due to limited table space in my setup, and I wanted a nearby place to place buildplates somewhere to cool down and start more prints. I decided to make a fairly simple shelf for this purpose. There is also a Gridfinity shelf option,…
I created a 20-magnet ball core for my Meilong 5 without the need to drill or file any piece of the cube. For the core, I used twenty-eight 4x1.5 N35 magnets. For the edge and corner mounts, I used twenty-four 3x1.5 N40 magnets and eight…
This part is intended to be installed between the top cover and the vent cover of the Prusa Core One. It acts as a barrier to prevent insects, which are attracted to heat or light, from entering the printer. I designed it to use minimal…
Recently upgraded my Prusa MK4 to the wonderful Prusa Core One. Quickly realized the Eufy camera I used to monitor the MK4 could not magically see through the Core One enclosure. The alternatives, the Prusa camera or the ESP32 variants,…
Try the newer version! I highly recommend using V2 of this model instead. I'm keeping V1 as a separate listing because of the weird duct angles that aren't supported in V2. I never used those weird angles, however, so not sure how well…
Combined all my favorite internal edits for the lynx into one package. Print the parts in 100% infill. If using a 36ID plunger tube from Kuryaka, I'd recommend 102% Scale on the Plunger Head too. Plunger Spacer also thickened at the base…
What is galling? galling noun : a type of wear caused by friction between metal surfaces, often leading to parts sticking or seizing. Example: "Galling can lead to a nut and bolt binding under high pressure." adjective : extremely…
just print it ;-) Add an additional Design with only 15 degree elevation.
3 February 2026 Added 10 row variant to include 'doubles', 'triples' and 'beds' or numbers down to 12. ================================================================================ I designed this scoreboard to keep track of scores in…
To ensure long‑term protection of the display and prevent dust, scratches, and other environmental contaminants from compromising its clarity, it is advisable to print and install a dedicated protective cover. This accessory is…
![Prusa Core One Filament door [prototype 1]](https://media.printables.com/media/prints/c94f2e76-8682-45e2-a422-30922a46e9f6/images/9873441_34cd6de8-c1b3-476f-8c60-fe5079bf0723_a3c5ec06-d79f-4e93-9e11-6a606e21d258/filamentdoor.png)
