Magnetic Webcam Mount for Core One
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic Webcam Mount that sticks one of the edges of the Core One (or any other magnetic Frame, i suppose).
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Magnetic Webcam Mount that sticks to one of the edges of the Core One (or any other magnetic Frame, i suppose). Up to 10 5x5mm Magnets can be used. (I used these: https://www.amazon.de/dp/B07N7PWY93 )
Should work with any Cam that has the usual ¼" thread, i used the Logitech C920.
The cable clips keep the cable tidy. Can be used up or down, so the cable clips can be on the left or the right side.
Print on the small side, clips facing up. Should need no supports.
I printed it on the Core One using Sunlu PLA Black Matte, 0.20mm Structural, 15% Infill.
The screw i used is this one: https://www.printables.com/model/152911-camera-tripod-screw-14-20-unc - for the screw i used the 0.10mm Fast Detail setting.