Magnetic Webcam Mount for Core One
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.21 – €1.47 net (excluding VAT)
For file: Logitech Webcam Core One V4_0.4n_0.2mm_PLA_COREONE_1h17m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.34 excluding VAT (range midpoint).
- Weight reported by the author
- 18 g
- Print time reported by the author
- 1.28 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Magnetic Webcam Mount that sticks one of the edges of the Core One (or any other magnetic Frame, i suppose).
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 12
- Makes
- 0
- Views
- 189
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Magnetic Webcam Mount that sticks to one of the edges of the Core One (or any other magnetic Frame, i suppose). Up to 10 5x5mm Magnets can be used. (I used these: https://www.amazon.de/dp/B07N7PWY93 )
Should work with any Cam that has the usual ¼" thread, i used the Logitech C920.
The cable clips keep the cable tidy. Can be used up or down, so the cable clips can be on the left or the right side.
Print on the small side, clips facing up. Should need no supports.
I printed it on the Core One using Sunlu PLA Black Matte, 0.20mm Structural, 15% Infill.
The screw i used is this one: https://www.printables.com/model/152911-camera-tripod-screw-14-20-unc - for the screw i used the 0.10mm Fast Detail setting.