Counting matching models…
Simple sleeve cover for Logitech BRIO webcam. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.1mm Infill: Standard Notes: I rotated flat side down to print avoiding rafts or supports. Might print…
Compatible with enclosure as it acts as both camera holder and panel holder. To mount it, I used an M5X20 screw with an attached nut to make it like an M5X18.
I used a couple of m3 screws to tension the bits together and it seems to hold my brio webcam pretty well. Not perfect but functional. Should work for other cameras with a similar ¼-20 mount Edit a while after: Recommended to print in…
Make sure to take apart your webcam and see if the board matches the one shown in the image. I'm not sure how else to identify the model; if you have any ideas please leave a comment. The case snaps shut, but should still be easy enough…
Camera centering jig ! I used cable holders from WoTanCZSK @WoTanCZSK_1608491 to guide the camera cable.
GoPro Mount / Webcam mount for 3030 Alu Profile / 3d Printer - Staffa montaggio per profilo 3030 / Stampante 3D Suitable for: https://www.printables.com/model/1171796-gopro-mount-extension-estensione-per-gopro…
This is a Multiboard remix of martin.zellner 's webcam holder for the DJI OSMO Pocket 3 gimbal camera . Martin's design attaches to an IKEA Skådis peg board, where I instead have updated it for Multiboard. Use standard Multiboard…
E N G L I S H This is a modular, tool-free, plug-in arm for a webcam for the Creality Ender3 V3 KE and printers with the identical Z-axis. No screws or glue are required. The holder is clamped onto the right-hand Z-axis cover and then…
E N G L I S H Suitable for: Artillery Sidewinder X3 Pro/Plus and X4 Pro/Plus. Features: no screws no glue no tools modular very many viewing angles universal fit holes for cable ties Foldable Print out of PETG, clip on and plug together…
The model allow mounting a lightbar or a webcam on OLED monitors with 5 mm thick screens, with a curvature of 1800R. Printed in PLA, no special features needed.
I wanted to have a nice budget microscope and bought a cheap usb one . It is good enough for the price (7€) but even with a good light source it didn't get a nice quality image. I disassembled it and found that the main parts consists of…
*Heat-set inserts required* Thank you for checking out my model. The problem this model aims to solve is that I would have to take off my webcam every time I wanted to rotate my monitor. It also provides a stable mount for the webcam…
It takes two M3 16mm screws to put it together (though you may be able to use the original C270 pin for the camera mount part) and slides onto the stock ender 3 frame. You only need to print the Stem and Arm (The bracket STL is just an…
A remixed webcam mount with a perfect view of the nozzle.
This is a remix of the Billnis remix which is based on the EunchanPark's original model from 2020. I had to make the remix because none of the Amazon links work anymore and my best guess for an available LED ring did not fit the model. I…
Summary Simple and quick-to-print wall or ceiling mount for Tapo Webcam. With countersunk holes and optional cable feed-through. Compatibility TP-link Tapo C200 / C210 / C220 / C201 / C202 / C211 / C212 / C222 / C230 Because they all use…
Snap on webcam mount for the Elegoo Neptune 4 3d printers. No mounting hardware required. I remixed the original model to fit a Creative VF0770 Live! webcam, but it should fit most webcams with a base but no mounting hardware.…
An optimized Webcam mount for ikea skadis featuring supports tp prevent sagging and thicker hook noses. Also designed so you can print it without the need of supports. The rough surface then also helps the camera keep its rotation over…
First reference I found was Betzuka for the idea to use a generic laser line and a generic USB webcam CCD sensor to do some trick laser levelling. https://github.com/betzuka/laserlevel Bryan Howard (…
My Logitech C270 webcam works great, but covers the top of my screen on my thin bezel monitor, making it difficult to move between tabs or close windows when covered. This simple clip-on shim is designed to improve the fit of the Logitech…
I was gridfinitying my drawer in my desk, and realized I needed to store my webcam. So i made this tray. It's...a tray. It only keeps it in place, it doesn't need grab indents cause it doesn't hold onto the camera that hard. It…
Logitech HD Webcam C270 support Camera Raspberry video de surveillance
Eye-Level Webcam Stand for Anker C200 I’ve always disliked how webcams are positioned on top of laptops or monitors. When the camera sits above the screen, it’s impossible to look someone in the eyes while also looking into the camera.…
Want to use your phone as a webcam, and already own a Quadlock case? This part might help you. Very easy to print, I used the default printer settings, as shown in the screenshot. The support was removable almost without traces. License…
The LG34GK950G was too deep to support my Xiaomi Mi Computer Monitor Light Bar . Modeled to support the 1900R screen, and made tall enough to prevent the light bar support from hitting the rear RGB bump.
Turn your Pixel 8 into the ultimate webcam for your ThinkPad! This bracket was specifically designed to bridge the gap between the Lenovo ThinkPad L13 Yoga and the Google Pixel 8 . With the release of the native "Webcam" mode in Android,…
1/4-20 thread on top for a webcam with threads. Mounts on top of a monitor
PETG recommended with at least 15% gyroid infill, 2 horizontal and 3 vertical shell layers. Supports recommended but not required.
Circular webcam cover with print-in-place hinge. No supports required. Default fits Yolocam S3, but sizes can be adjusted in settings. OpenSCAD code written with AI, edited by me.
Petit boitier pour camera hd , imprimer à 0,2 par couche 20 % remplissage
This is a web cam cover for the Lenovo Legion 5. The top is angled to match the profile of the screen. It's printable in 2 parts (mix - n - match colors if you like). Once printed there is a little force needed to slide the movable camera…
A multi part printable shell casing for a Logitech C920 / C930 Webcam, removed from the manufacturer's shell. NOTE: I've updated the files: Removed the mount i previously designed to be printed, and updated the design to implement the…
Simple Logitech C270 webcam mount for a server rack. Attaches with a M3x25 machine screw.
Simple stand to place your webcam / headphones next to your monitor. Sometimes it is not convenient to place the camera to its usual place - on top of the monitor. Monitors today are very large and the camera then may be placed too high…
I just bought the cheaped webcam off aliexpress and it came with this weird clip on mechanisms, all you have to do if you got a similar one, is take the mechanism off and the webcam is only attached via a single plastic screw through it.…
I made a few small tweaks to jshank's design to the support the Logitech C310 and turned the holder upside down to leave more space under the webcam. This is my first time even using blender to model. Prusa Slicer will complain about the…
Mit diesem Clip lässt sich eine Webcam direkt an den Pfosten der Stubberget-Monitorhalterung clipsen. Ich habe in PETG und mit Support für das Gewinde gedruckt. Das Gewinde sah nicht optimal aus, funktioniert aber problemlos. This clip…
The IKEA Tertial is widely beloved for its high maneuverability and low price point. Transform it into a simple office accessory into a professional-grade, articulated mount for your camera. Key Features Universal Compatibility: Designed…
Keil für eine Reolink RLC-823A Dom Kamera für die Montag an einer schrägen Wand.
I designed my own webcam mount for my Ender 3 S1 Pro. I wanted the cam drive with the Z-Axis. You can use the holes for different positions and cams. I printed it in black Petg and its worked perferct for me . Hope you enjoy. Today…
KP3s Pro V2 mini webcam support, no arms, compact design. You can see your printer and make timelapse. It is easy to mont, you only need removed de pull cover, and mount the printer part with the same screws. To fixed the extruder wire…
Supports Recommended (Organic or Grid) 0.1-0.15 Layer Height
Super quick tinkercad model to get a new Tadpole mounted to a monitor. Lots of room for improvement. It's ugly but it works.
I changed the angle of the camera end of the mount to be perpendicular to the radius of the build plate. Now, the front of the camera and the front edge of the mount are parallel. I used PETG at 0.2mm layer height and 15% Gyroid infill,…
Version 2 édité le 10 mars 2024. Je vous propose un support pour des caméras équipées d'un taraudage de type appareil photo, Mintion Beagle V1 et Mintion Beagle V2 à monter sur les Artillery X4 Pro. Le support est sécurisé par une des vis…
Webcam stand adapter for computer monitor light bar. This adapter is designed to place the AnkerWork C310 4K WebcamPC on the Xiaomi Mi Computer Monitor Light Bar, yet could be adaptable to other devices. Rotate the model (Y-axis 180…
This is just an other webcam holder, but a very strong one. Espacially for the Logitech Quickcam Pro 9000. But you can easy design any holder (phones, lights, etc.) you like. If you in troubble, let me know. Mayby I can help. The base ist…
I'm in processing make over for my Ender 3 Pro. Make it look nicer and more reliable that's why i came up with this model. since i did mod my x axis with linear rail i use this model link below for the cover but use can use it with stock…
Latest files are available on MakerWorld. Get the full Plate Print Profiles with settings known to work: https://makerworld.com/en/models/436093 === Control the height of your desktop webcam with this adjustable webcam mount. — From about…
Remixed the webcam mount from Fryeguy to fit the Elegoo Neptune 4 Pro (and i'm assuming most other Neptunes) V slots. Install is very simple, just remove the bracket and screws in the vslot and slide it in, the screw them back on. The…
A 2x1 gridfinity for the Nexigo N940P webcam remote.
The bracket connected to X-rail through existing hole. You will need one M4 screw with nut (screw length: 12-15mm). STEP file included. I printed it on Elegoo Neptune 4 (0.4mm nozzle) in Jayo PETG with 0.2 layer height, 0.6mm line width,…
Google's Pixel 8 Pro smartphone can be used as a webcam. I designed this mount to hold my smartphone on the back of my laptop. The model consists of three seperate parts that you can orient & print without supports. The two sides slide…
CR200B webcam holder that fits into the circle on the left side of the printer
Description I wanted a webcam cover that was easier to mount than the ones typically found online. I also wanted it to have more surface area to have a stronger bond to the laptop. I found those characteristics on one of the designs found…
This is a lens cap/cover for the Onn (Walmart stock number 100028731) webcam. It's a three-piece design. One piece clips onto the housing of the camera and is self-retaining. At the front is a cover which creates an enclosed pocket for a…
Small clip to cover the webcam of the laptop for security when not using it, you can remove or slide it to a side to use the webcam. Print it over one side (see picture of the piece on the printer bed), so it will have some flexibility to…
I've designed two covers for the webcam of the white iMac (Late 2007 and earlier). On the photo you can see that they fit also on a newer silver iMac.
UPDATE 07/07/21: Have fixed mounting holes, and strengthened the base off the ball joint. you will need slightly longer (10mm more) than stock screws for mounting, or use glue. Simple ball and socket joint webcam mount i designed for my…
HI, I created this very basic webcam mount to hold my cheap Aukey LM1 webcam on top of my printer and monitor my prints. 1-2-3 easy peasy steps: Print Attach the webcam to the mount with zip ties Insert the webcam mount into the slot at…
Hi, 2025-01-16 UPDATE v2 I totally reworked the attachments between the parts. Instead of relying on solely 2x2mm diameter cylindric plugs, there's now much more stronger rectangular bounds. You can easily put cyanoacrylate glue in the…
I attached my webcam on top of my printer (see my webcam mount for Artillery SideWinder X2 design). Thus I had its cable hanging and putting at risk my prints. So I design those two little guides to make sure that the webcam cable stays…
Simple Logitech Webcam C930e mount for PrintClosure Uses original M3 hole in the corner of the enclosure. Additional: ¼ inch camera screw ( Like this one )
This is device mounting for a Logitech C270 on an Ender 3 S1 Pro. The webcam just slides snuggly into the holder. The angled shaft allows you to move the webcam around for the view you want. Flipping the shaft over allows for low or high…
This is a webcam cable channel for hiding a webcam's cable within a XL enclosure. It has slots for two 20x5x2mm magnets and could honestly be used for anything you wanted to hide that is 3.5mm or less in diameter. Quick build using…
Support d'angle pour caméra intérieure INQMEGA Smart PTZ Fixation par vis (boutonnière) Utilisation à poser possible
This camera is very cheap (25€ in Amazon Spain) and has a good quality, it has been used on a raspberry pi 3 b with klipper and the standard camera configuration. The problem is that the stock housing is too big and includes a tripod…
DE: Halterung für die Trust Trino HD Webcam zur Befestigung an der Honeycomb Storage Wall EN: Mount for the Trust Trino
For my 2.4 build I really wanted to use one of the many surplus webcams floating around my place rather than spending money on a new one that would be easily installed without creating clearance issues. Unfortunately I've discovered that…
I wanted to use my normal webcam as printer camera but on a trident it is tricky where you put it as they are so bulky. I took inspiration from the extrusion mount from orangetruth but added a round pin at the end to ensure I could secure…
Mounting a Logitech Brio 4k to a tripod using a ¼ insert thread and a threaded end M4
I'm using a non-impressive Wansview camera so there is one mount for that and then the standard ¼"-20 bolt hole from the original. This fits perfectly between the two screws on the front that hold the left Y axis.
An easy print, parametric hinged privacy shutter for web cams. See photo for defined variables to adjust. Included .stl file example is for Logitech CrystalCam C920. Layer height 0.15mm Infill 15% Perimeters: 3 No Supports Includes…
eine passende Halterung für die Logitech c270 am Kobra 3
i wanted a decent and convenient way to mount a camera to the ender 3. the original design was a simple cover that slipped on to the left side pulley cover. i simply added the space to add a screw. you can mount a camera to the x axis…
Small support to put a logitech webcam on the side of the Z axis. You'll need 1 M4x10mm and a nut to mount it. Print Settings Printer Brand: Velleman Printer: K8200 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2mm Infill: 10%…
I happened to have a TAPO C225 Webcam that I ended up incorporating into my 3D printing enclosure. Designed a very simple stand that raises the webcam to or just above the level of the MK4 print bed (and still reposition around the…
Compatible with enclosure as it acts as both camera holder and panel holder. To mount it, I used an M5X20 screw with an attached nut to make it like an M5X18.
I bought this webcam off Amazon for watching my 3D printer: B08VJ25PL1 The Internet given the camera's USB ID (32e6:9221) says the vendor is “icSpring”. The stand it's embedded in comes with a threaded camera screw hole, but I didn't like…
Die Logitech Webcam C505e wird an einem Dell Monitor betrieben. Leider hängt diese teilweise im Bildschirm und deswegen musste eine Halterung her. Die Halterung wird auf den Stand gesteckt. Zum bearbeiten ist eine Fusion 360 Datei dabei.
A camera mount for the Logitech C270, C920, Brio100, and Brio101 cameras. Works great with my Ender 3v2 Multiboard attachment here: https://www.printables.com/model/1036841-multiboard-tiles-ender-3v2-attachment Note: This uses Multiboard…
Used the arms and holders of the “small arm system” from @RostaP 's awesome Multifunction Arm mounting system . Added a split base so that it can stand on itself and a new holder variant which allows for a ¼"-20 screw to hold the webcam.…
Is a beautiful housing for webcam. I have the V380 cam. There might similar cams out there which may fit inside the housing. Print Settings Printer: Flsun QQ-S Pro Rafts: No **Supports:** Yes Resolution: Extra Fast (0.3mm) **Infill:** 10%…
A mounting bracket to add an infrared light source to Microsoft Lifecam.
the ender 3 s1 is different from the pro version and therefore Peter's model did not screw well to the printer. the bjw-s model on the other hand is perfect for the ender 3 s1 but is not tall enough. so I joined them together making some…
The model's author, Scatterthought, mentioned storing their original-design Razer Kiyo cover on their desk when not in use - which helped as a reminder to replace it on the webcam when done. Unfortunately, my desk is horribly cluttered…
The phone frame is tilted at 135 degrees. For use e.g. with the IP Webcam application.
The rotating vise can hold webcams with a maxiaml width of 9cm. You can print it out in two ways. If you choose you want the mount for Ender 3 pro with an open (out) link then you have to print the rail mount with a close (in) link … then…
Wanted a mount for a webcam, thanks to Blackbird for the design idea. Left room for an indexer too. It fits but not tight, so I added a dab of glue.
I designed this Neptune 4 Series webcam mount to attach to the original display slot, allowing flexible positioning thanks to an adjustable turret for easy camera angle and height adjustments. The webcam can also be mounted without the…
