Ball mount for icSpring webcam for articulating camera mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows mounting a cheap webcam on the system
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 19
- Makes
- 0
- Views
- 222
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I bought this webcam off Amazon for watching my 3D printer: B08VJ25PL1
The Internet given the camera's USB ID (32e6:9221) says the vendor is “icSpring”.
The stand it's embedded in comes with a threaded camera screw hole, but I didn't like the idea of mounting all that additional plastic on top of the articulating arms. So I made this.
Printing
Prints without support, in this unnatural orientation:
Assembly
To attach the camera, you'll need to disassemble the stand the camera comes with. Both flat plasticy sections come with 4 screws under the felt. The camera is held on a plastic part with a hole and fastened to it via a screw, and the joint goes through the hole in a sphere-shaped part. Disassemble that, take out the screw and the little round plasticky part. Take this 3D-printed mount and reassemble the camera housing+plasticy roundy thingy+screw inside the hollow ball, analogously to how it's used in the factory-default stand.