Ball mount for icSpring webcam for articulating camera mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows mounting a cheap webcam on the system
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 219
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I bought this webcam off Amazon for watching my 3D printer: B08VJ25PL1
The Internet given the camera's USB ID (32e6:9221) says the vendor is “icSpring”.
The stand it's embedded in comes with a threaded camera screw hole, but I didn't like the idea of mounting all that additional plastic on top of the articulating arms. So I made this.
Printing
Prints without support, in this unnatural orientation:
Assembly
To attach the camera, you'll need to disassemble the stand the camera comes with. Both flat plasticy sections come with 4 screws under the felt. The camera is held on a plastic part with a hole and fastened to it via a screw, and the joint goes through the hole in a sphere-shaped part. Disassemble that, take out the screw and the little round plasticky part. Take this 3D-printed mount and reassemble the camera housing+plasticy roundy thingy+screw inside the hollow ball, analogously to how it's used in the factory-default stand.