Liczymy pasujące modele…
My daughter wants to have a Pokeball and so I designed one for her. You can open it and put Pokemon inside ;-) Use a piece of PETG Filament for the hinge. Printed well in PLA. Glue the inner rings into the hemispheres. If you want to have…
**EDIT 04/26: I updated this model to have higher detail geometry. You know I had to do one of the most popular versions! This one is inspired by the Master Ball. If you want to check out the original, go here! There is a full organized…
Updated version of my old faithful test print design, now with squashed vase version as well as the traditional pot version. Both versions are made to be printed in spiral vase mode. up the extrusion width for more strength
Hollow pinball knob for adding Led lights into the plunger. Fits on a hollow 8.1mm plunger rod. Category: Games
A ball bearing separator for various sizes. If you like it and is useful for you, give it a like.
THIS IS A SNOWBALL MAKER! ________________________________________________________________________________________________________________________________ ASSEMBLY GUIDE: After printing ALL THE PARTS , put both halves of the mold on top…
This 3D model includes a Countryball that can be modified as desired.
10-15 minute print, that can easily slide onto almost any key and works on a key chain. Has 4 Different options for different teams, or just blank for overall fun. Enjoy! To make sure the model stays secure during printing, I recommend…
A turbine herb Grinder based on the morph ball from Metroid. It is print in 2 pieces. It (kind of) working It is a reupload of my thingyverse.
The vortex ball is a toy mainly for throwing to entertain pets or just for some fun. Ideally, made from flexible TPU for longevity and safety. Although, PETG and PLA can be used if TPU unavailable but I recommend use with cation to…
a bb gun to shot on your friends or not
If you've lost or otherwise need a backup to the original puller for your precision pinball flipper, then this 3d printed version will do the trick. This design mimics the original, but requires a matching #6-32 nut to the screw, in order…
Wall mount tow ball cap holder diameter 50 mm. Holes for M6 screws, center distance 45 mm.
I made this lid because I lost the stock one, this one is made out of TPU so it is flexible and works just like the stock one or even better, because TPU is stronger.
Dragon ball Z wall art Leave a comment of your suggestion Category: 2D Art
Dragon Ball Z wall art Leave a comment of your suggestion Category: 2D Art
Dragon Ball Z wall art Leave a comment of your suggestion Category: 2D Art
Dragon ball Z wall art Leave a comment of your suggestion Category: 2D Art
Dragon ball Z wall art Leave a comment of your suggestion Category: 2D Art
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
i mad this so the batt nexed to my bed would not roll around. if to small scale up.
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
When I tried to use the supplied axle with my PolyDryer on a roll of Sunlu ABS with a broken ring, I found the spool wasn't lifted enough to avoid the bottom rollers. About that time I saw the One-Way Check Valve video from @clough42 and…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
A minimalist tray for Vessel Ball Grip 220USB Electric Screwdrivers. Spaces for extra bits or bit adapters.
This modern, hexagonal wireframe sculpture features an intricate lattice design with a floating spiral at the center. Perfect for minimalist decor, artistic displays, or desktop decoration, it's optimized for easy 3D printing with minimal…
KDxGP STRECHR.SPL Check out my socials and other things at https://linktr.ee/KDxGP Like my creations? Consider buying me a coffee ☕ at https://www.buymeacoffee.com/KDxGP. Thank you! STRECHR.SPL comes in two different heights: 15mm and…
These hot air balloons are printed in two parts. When assembled the balloon is held in place by 6 single extruded strands of filament. They are delicate and once printed should be handled with care. There are two sizes. Print at 0.3mm…
If you don't want to buy a ball-peen hammer and you can 3d print, this is the ticket. size appropiately.
I wanted to mount a screen on my Skadis. But I couldn't find any reliable 3D printed swivel solution (I need the screen to be adjustable). Instead of trying to come up with a 3D design, I opted for a reasonably priced Ball Joint module…
I struggle making round meataballs. My paws are too big, I'm clumsy and I get ground meat stuck to everything. Many commercial meataball presses suffer from the meat getting stuck inside the hollows, and require you to pick out and…
The original Ballet Dancer 02 is created and kindly released to Internet by “mytanas” it was hard to print for me. TheNit released a remix of the figure in two parts. Grand job! Original: https://www.thingiverse.com/thing:1819299 Remix by…
Ball in BOX Print temp. 210Nozzle 60Bet Print speed 150mm/s i prepare 80mm/s Print with supports
I love this Lego hitch ball cover (https://www.printables.com/model/263115-lego) so I make some accesories. The Santa hat fits firmly on the Lego ball hitch cover. It should be printed with fuzzy skin, outside only.
I love this Lego hitch ball cover (https://www.printables.com/model/263115-lego) so I make some accesories. It has to be glued on the Lego head! It should be printed with fuzzy skin, outside only.
I was playing with some .50 BMG ammo and thought “hey, this would make a neat PEN!” So here you go. I know there are pens available made from ACTUAL .50 BMG casings and rounds, however I am lazy and didn't want to bother sourcing real…
The Magsafe Charging Ball is perfect to keep your desk in style and your phone charged ! Made for easy printing with no need of support, it is pretty compact and useful.
Twilight Zone pinball clock housing. The original tends to crack or get yellowish and is very expensive to buy.
Update: added v2 version based on my Goldberg polyhedron golf ball: https://www.printables.com/model/1376790-goldberg-polyhedron-golf-ball For v2 there is a 0mm tolerance version available for a tight fit, which is the one I recommend if…
Freak XL insert case. Fits four inserts. Uses eight 6X3 mm magnets to hold the lid on. Use a little bit of super glue to hold the magnets in. They should be snug, but not hard to push in. They are not meant to be friction fit. I used ABS,…
A simple whiffle ball I made for my robotics club. print with simple supports touching the baseplate. if you are competing in the Robolink Aerial Drone Competition, scale the ball down to 90% size to get the same mass as the balls used in…
I am using this holder together with gopro ball adapter. Gopro system is used to connect raspberry pi zero system (octoprint) equipped with camera. Compatible ball joints with threads or gopro mount:…
Beautiful Christmas decoration, just insert the LED light.
Christmas is coming! It is time to decorate your home. Add a small piece of double-sided tape and effortlessly hang this stunning 2D artwork on your wall. Model parameters: Length: 85mm Width: 50.4mm Height: 0.76mm (3 layers) Colors:…
Update (--> for Breacher & Battle Axe) --------------------------------------------- Silly Shell with 3x airtight Elite barrels 6x Short Darts / 3x Elite Darts / 18 caliber .50 foam balls Update 30.9.2025: Modified shell, suitable for…
This 3D-printed Christmas card features two collapsible Christmas balls that are initially printed flat but can be easily transformed into 3D ornaments. One of the balls incorporates a built-in light to provide a warm, festive glow when…
This is a model of the upper control arm ball joint boot for the Honda civic EG and Del Sol. I modeled the walls to be 1mm thick and it seems to come out perfect for a boot, if anyone installs it let me know how it holds up. I modeled a…
The Soundboks Gen 2 speaker has hard aluminum corner bumpers, unlike the rubber corner bumpers on the Gen 3 and Gen 4 speakers. These hard bumpers are prone to scratch and dent. This model is designed to add a bit of squishy TPU…
I really liked the original model but I thought it would be even more awesome with a smaller ball inside it. So I made it. Here's a video showing how the inner ball can move freely inside the outer ball: Support is necessary because the…
This is just a bowling ball cup I remixed per request. (For other brands, I would like to upload them as a different model keeping this set Storm themed.) You can either use the .3mf files with printers with multiple extruders or material…
The .3MF file is ready to print on PrusaSlicer for the Prusa MK4 with MMU3 Assembly Instructions: Use a small amount of superglue for the lock bar first, then the side rails. Print and cut out the .pdf decals on 8.5 x 11" paper…
Keep your kegerator organized with these redesigned ball lock covers, perfect for managing the all your keezer co2 lines! Printed in PTEG at 15% Infill with support on build plate only Make your kegerator setup as smooth as your pour.…
Printing the airless basketballs at full size works just fine but scaling them down to half size makes them a little bit too weak and difficult to print with a 0,6mm nozzle so I designed my own 120mm ball It has a lot thicker design with…
Here's a design I created a while ago, but never shared online. I found it while decorating my tree this year. I decided it was too good to keep to myself. I've provided updated PrusaSlicer 3MF and Prusa MK3S+ GCODE files. I tested the…
The ball vice I made results from remixing three models: Open Ball V1 (Ball vise system) , D-Series Ball Vise and D-series Dovetail Vises . Credit goes to Chris Borge for the original designs, Chris Deeter for his very helpful Build Guide…
The ball vice I made results from remixing three models: Open Ball V1 (Ball vise system) , D-Series Ball Vise and D-series Dovetail Vises . Credit goes to Chris Borge for the original designs, Chris Deeter for his very helpful Build Guide…
Wanted to try designing a Pokeball. It's not perfect, but I'm quite happy with the result, considering it was done in 20 minutes using TinkerCAD. This is version one where it's just one part, will upload a second version with parts as…
Before looking at the models available here, I created and tested this balloon tying tool. I think the use is completely the same as the other models. The difference I find for me is that with this tool you can tie highly inflated…
I designed and printed this model to make it easier to fill 1000 4.5 mm ball bottles without removing the bottle cap. There are two versions, with version 2 being more practical. Printed in PLA without supports, 0.1 layer.
Design: Structure: Gyroscope-based Christmas ornaments Components: 4 concentric rings Interior Element: Central decorative figure Decoration Options: Ring Heart Star Snowflake Dimensions: Outer Ring Diameter: 67 cm Maximum Figure Height:…
These protectors are designed for the two cellar shots on Whirlwind pinball. On my game these were pretty worn, so these will both protect the game from further wear as well as make the shots closer to the original tolerance. They fit…
This is a direct bolt in replacement for the brass bearing plate on the solenoid box side. Uses an R8-2RS bearing. Only works on early dampers with the round shaft.
*THIS IS NOT MY DESIGN * Just Wanted to post this from thingiverse, it’s pretty cool
Ball joint test print with 5mm female joint an 4.7mm~5.2mm male joint.
This was a stepping stone to get to the fidget spinner I also posted, I figured why the heck not post this one too, it's pretty cool! This bearing is a frankenstein, it has a ½" ID with a 1-3/8" OD (a mix between an R8 and R10 bearing…
Cool gear ball thing made by RuvenBals at https://thangs.com/designer/RuvenBals/3d-model/Gear%20Ball-1069853 He said on Reddit the model would cost money later so I'm uploading it here first since it's Creative Commons. Well, less than a…
This is a Christmas ball with a christmas tree in it.
Hueforge Banksy “Mädchen mit Balloon” Verwendete Filamente: Polyterra Charcoal Black Polyterra Cotton White Polyterra Lava Red Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Red At layer #10 (0.88mm) swap to White for…
The pin will hold if you just stick it in, but I would prefer to glue the printed part into the bottom part.
I wanted to build a folgers can for my pinball machine so decided to give it a shot and here are the results. I originally set off to install on the lower left side below the ball return to try and limit the ball bouncing over that ramp…
I modified this bowling pin as I needed some type of mod to help block the ball from going off the left side ramp (lebowski) and getting stuck. Made some size adjustments and added a base for easier mounting. I'll also include my versions…
The way I play golf, “Lift, Clean and Place” happens almost every shot, anywhere on the course, because if I don't I tend to line myself up directly into the woods. Lost balls? In this economy? This tool can help you put a quick line on…
This is a piece that I made specifically so that I could adapt my ESR Brand Qi2 charger (https://a.co/d/04FSyxH) to this base that EngineerPro made (https://makerworld.com/en/models/17679#profileId-16433) Im not sure if this adapter will…
I recommend using balls with blue dot; they are the hardest. ACCESSORIES Prusa CoreOne/+ You will need 4 M3x6MM screws to fix them to the lower frame; this one has 4 threaded holes in each of the 4 corners as standard. Prusa CoreOneL You…
This model is of a balloon dog I made but I've shrank it to mini size and added a perfectly fitted hole for a drawstring. The hole will fit any drawstring that has the plastic tip 4mm or smaller. 0.2mm layer height 10-15% gyroid infill…
