1 / 1
Hex low profile toolless Prusa i3MK3/S squash ball feet damper vibrations/noise isolator — zdjęcie 1

Hex low profile toolless Prusa i3MK3/S squash ball feet damper vibrations/noise isolator

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Different look of toolless low profile MK3 squash ball feet by @Osfald

Ocena
5 / 5
Polubienia
11
Pobrania
36
Wydruki
1
Wyświetlenia
462
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Remix of @Oswald's squash ball feet V5 (slimmer one).
This design changes the look to be hex and more chonky.

 

Used parts

  • 4x PERFLY two yellow dot squash balls from Decathlon (one for each leg)

 

My print settings

  • PETG
  • 0.4 nozzle
  • 0.2 layer
  • 15% gyroid infill
  • 5 top & bottom layers
  • supports ONLY around aluminum profile insert

Printed it on Prusa MK3s. Positioned it upside down (uses more filament and time), to take advantage of textured bed… But you don't have to!

 

Do not remove any parts of your printer to install these feet! No end plates or caps need to be removed! Simply angle the feet and slide them into the frame aluminium profile BOTTOM grooves. Insert feet at an angle and then level. I have designed them accordingly to use such shape fitting. You don't have to use any screws or dismount the frame.

– @Oswald

 

Tagi