Liczymy pasujące modele…
I could not find a scraper sporting a hex pattern, clearly this had to fixed. Perfect for scraping prints off your build plate, as well as your other scraping-needs. Should be printed with .15 or smaller layer height to make the edge…
Wydruk około 0,92 €–1,13 € nettoWstępna wycena jednego wariantu
Shelf bracket (2 versions) I made these cool looking shelf supports. They are 150x75mm in size. There are openings in the pattern to accommodate fastening (with some angle). Be careful when fastening the countersunk screws! I also made a…
Style meets functionality with Hexo Pod desk organizers. Intended to keep your desk space clutter-free and organized to decrease annoyances and increase productivity! All of the parts fit together so that you can customize the size and…
Three sizes of hexagon MOLLE panels are available. Originally designed to fit inside a backpack, they can also be used for other purposes. Small: 9.6” x 11.9” Medium: 9.6” x 14.1” Large: 10.9” x 14.1” Print Settings: Rafts: No Supports:…
I was looking for a bit holder to hold a few bits that were loose in my tool box drawer. I couldn't find one that was right, so I drew one up. The bits do not fit sung in the holes but they are deep enough that they will not fall out when…
Here’s my standalone Moon Hexagon display piece. Print it standing on its legs. I used supports, but you can try without them if you’re feeling brave 😉 The insert tolerance is set to 0.2 mm, which works very well on my Prusa. With a 0.6…
This is a set of token trays, dice trays and a dice tower with tray. Each one has a width (face to face) of 100mm (4") and a height of 12mm with a curved 10mm deep x 90mm wide well. They can either be clipped together using the supplied…
Welcome to HexChain, a strategic game where you and your opponent compete to form the largest and most complex network of organic molecules . Using atom pieces and chemical bonds, you aim to build structures that maximize your score…
A very fast and easy to print desktop stand for your hex keys. The design goal was to make it as simple as possible. I ended up with only two different parts. Print every part 2 times and you end up with a total of 4 parts. Depending on…
I needed a more flexible thinner grid with seamless expansion capabilities to cover bigger areas where my robot mower digs holes and get stuck in wet weather. I also added pegs and assembly clips to join the mats and peg them down.
its a Desk Organizers hexagon its 18cm wide and 15 cm tall, i dont know what to say more i just needed it so here is the model for other people
Modularer Hexagon-Deko-Baustein Die Teile lassen sich wie Puzzleteile beliebig miteinander kombinieren!
I have not got round to printing this remix yet but the body is exactly the same as Tomex's original body except the front of it is now blank (no hex tiles) with a skull image added. You will will need to add a second extruder in…
Just a smaller version of the original design. My work table is too small for the original design.
Skadis holder for LDO Metric Hex Key set . One can be printed without supports, but is not as sturdy (I assume) as the support version. I have only used the support version. Felt it was overkill so made the other one too.
This remix adds M2 hex nut slots in the bottom. Using M2x12 or longer screws you can raise the lid to adjust fit and tightness of the z-coupler inside the frame. I made this remix as my SV06 Plus' z-coupler did not fit inside the original…
I have a ratty old, but aways useful, imperial hex driver set but it’s missing the slip-on handle that is essential for the added torque often required. I was working in PETG and thought it would be the perfect material for a new handle!…
Stay stylish and hydrated with the Amber Hydration Bottle with Hexagon Coaster! This amber-toned bottle combines sleek design with practical functionality, providing a unique drinking experience. Paired with a geometric hexagonal coaster,…
I was looking for a better storage solution for my short Nerf darts and when I could not find something that fit what I was looking for I decided to create my own. This is Nerf Short dart storage for worker gen 3 short darts. the…
As seen on Tim DeBoer's gorgeous tool wall of fame . Tool holder for the hex keys from Runwell Japan. Runwell makes beautiful tools, and these hex keys are no different, but they're also high precision and really, really nice to work…
Hi. These are 12mm HEX designed specifically for Trx Fiesta rally wheels used on Bandit. Main point is the thickness (offset) of the HEX in such way, that front wheels are tucked to inside as much as possible (red hex photo), and rear are…
Perfectly well screwing nut and bold. For strength print with 100% infill. Can be used for my underdesk quick mount .
Re-mixing to fix the issues where the parts were too loose and the assembly falls apart. Printed on Prusa MK4 with 0.4mm nozzle 0.2mm layer Height, 2 perimeters Print with “External Perimeters First” to maintain dimensional accuracy. 15%…
I recommend downloading the .3mf file as it already has all the settings in it, including the modifier for the logo. Settings: Layer height: 0.2mm (STRUCTURAL) Perimeters: 8 Top Solid layers: 0 Bottom Solid layers: 0 Infill: 15% Fill…
Print settings: Step: 0.2 Shell: 2 Infill: 20% Supports: Yes Filament: PETG GST3D (Black)
I created a stand for my external Drive. I use the following Drive: https://www.amazon.com/Elements-Portable-External-Drive-WDBU6Y0050BBK-WESN/dp/B089978LBB Feel free to remix etc.
Puzzle description: There are 36 different hexominoes (consisting of six squares each) and 12 pentominoes (five squares each). They consist of 270 small squares which can be packed into many frames, see…
I made this for a shelf I use a lot. Helps to organize smaller things and maximize space. It's for https://www.thingiverse.com/thing:2110961/makes which is an incredible shelf with no love on thingiverse
This is to hold the set of 3 hex key sets from harbor freight.
Transform your space with this versatile hexagonal organizer! Designed for dual functionality, it can be assembled as a stylish shoe rack or an efficient spool holder. Each net is reinforced using broomsticks (2.4 mm diameter), and by…
Here an nice and attachable showplates for Gamelogos. The Stp is also included for your own creations. Click it together. Bordercorner must be glued.
A remix to suit my needs. I wanted these parts to match the shape of the original Voron release parts I had printed.
I printed in PETG Inland Red. Normal settings and bottom side down. You could glue it down but I prefer being able to take it out and move it around. It stays pretty secure thanks to the original design having the cut outs for the packout…
The model was designed to fit 120mm hexagonal pads. It ensures even spacing between the pads, and in my case, ensured that any push pins don't damage the wall. For a secure fit, I recommend using glue with the joints. The ones in the…
Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…
I do NOT recommend using this in a computer or around electronics that have not been waterproofed. I am not responsible for any damage that occurs due to leaks or whatever else. User assumes all risk. Test thoroughly before use. Print hot…
Simple hexagonal shelves, ‘cause I’ll need to put my stuff -somewhere-! Printed in PLA, at 0.5 layers. Around 11cm tall and 7cm deep~ Print a front, a back, and 3 walls. Superglue them in place (the shape should make it intuitive, I hope…
Great for displaying Hot Wheels collection, easy to print.
You will find a SolidWorks file attached here, which allows you to modify sizes and dimensions as needed. The design currently features a hexagon pattern, but this can be altered or replaced entirely. Additionally, you have the option to…
A fidget toy to always have at hand. Simply print it in less than 15 minutes and attach it to your key chain to always have it with you! Features Simple to print A cool-looking fidget toy Prints in less than 15 minutes No supports needed…
Board Game Token Tray - designed for organizing board game tokens efficiently. Modular & Magnetic: Slots for magnets allow trays to be arranged in customizable configurations for different games. We use 6x2mm magnets, magnets are…
Greetings. I found myself needing to organize some long bits on my wall. so I made this design to hold the bits with that type of indentation in the base. As always, I also provide the editable version in case anyone wants to make any…
Handles for Hex Keys. This includes all sizes from a kit available from Home Depot.
The DUMB Wallet – HEX Edition ( D esigned U sing M inimal B ullshit, Now With Extra Grip & Drip) The original DUMB Wallet was already stupid simple. This one? Still stupid, but sexier. The kind of thing you'd leave on your desk just to…
This is a 1"-8 UNC hex nut and an assortment of hex bolts in various lengths. These models have actually been printed and tweaked to operate with similar clearances to real metal nuts and bolts I got from McMaster-Carr. Obviously, don't…
Half-hex tall token tray for board games - designed for organizing a big amount of board game tokens efficiently. Modular & Magnetic: Slots for magnets allow trays to be arranged in customizable configurations for different games. We use…
Hex tall token tray for board games - designed for organizing a big amount of board game tokens efficiently. Modular & Magnetic: Slots for magnets allow trays to be arranged in customizable configurations for different games. We use 6x2mm…
Willie G Skull Harley bell. I printed it with no supports, it turned out great. I would have printed it in silver silk but I'm out of it at the moment. Post your makes I'd love to see them.
Space between bolts is 176mm may fit to some other Led-par models as well. There is also small recess for mirror film if want glue one and give light more reflection power.
Remix of @LowellAlleman's excellent bit holder but modified to fit the newer tool bases. Many new Dewalt Tools include a bump out in the base to allow for inserting their Tool Connect tracker which interfered with the original model in…
I designed these because I deal with lots of hex socket cap screws at my work and I wanted a faster way to find out the correct size without waltzing around looking for sockets around the shop. (I designed this because I didn't have any…
The base was printed with PLA Prusament Gentleman's Grey using the fuzzy skin setting. The lampshade was printed with generic white PETG in spiral vase mode. You can make the lamp base heavier by adding glass marbles into the hollow base.…
A simple allen key holder for multiboard . Sizes: 3/8, 5/16, 1/4, 7/32, 3/16, 5/32, 9/64, 1/8, 7/64, 3/32, 5/64, 1/16, .050 Comes in two versions: with engraved (debossed) and embossed text Attaches using anti-rotate multiconnect so you…
Paint Spray hexagon stencil 10x10 cm for example to painting guns or accessory Print settings Layer 0,2 4 walls 15% infill no supports
Hexagonal cascade pencil holder. Šestihranný stupňovitý držák na tužky
Paint Spray hexagon stencil 21x21 cm for example to painting guns or accessory Print settings Layer 0,2 4 walls 15% infill no supports
Hexagonal cascade pencil holder. Šestihranný stupňovitý držák na tužky.
Hexagonal cascade pencil holder. Šestihranný stupňovitý držák na tužky.
FDMecha Hex Terrain is a tabletop terrain system for hex-grid sci-fi mech gaming, made to play well and look great right off the printer. Tiles are designed in a "mid-poly" style that works at a variety of scales, reads clearly for…
The most meticulously organized Lego Star Wars collection A complete list of 55 Star wars factions available to download: At Attin Black Sun Bondsman's Guild/Bounty Hunters Churches of the Force CIS Separatists Clan Djarin Clan Fett…
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of Hex screws according to ISO, ranging in sizes from M5 to M20, each available in lengths of 10 mm, 15 mm, 16 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40…
Here is a hex wrench holder for imperial wrenches. It covers wrenches from 0.05" (the smallest) to 1/4". It contains the following features: Two rows, to allow holding two of each wrench should one get worn down. Measurements above each…
I designed this because I wanted a screwdriver handle grip for a set of nylon bore brushes I use for removing internal strings from 3d prints. Sometimes it's difficult to find the right bottle brush but the nylon bore brushes come in…
Main game element for VEX V5 Push Back 2025-2026. Able to be printed in both alliance colors. Cheep and fast print time. Wishing everyone well for this season:) 5606A
Since Lego introduced the new F1 mini-figure cars i decided that i wanted them on my wall also. Since 2 of them where perfectly sized to be shown next to each other i decided to remodel the 9 set to the print that it became now. The one…
Prints on it's back, scale to any size! No supports needed! Holds 12 minis. Can be hung on wall too!
This is the original design but with some angle and a slot for CHEP hooks.
Some parts to assembly different terrain Use clips to assembly To assemble door use filament as a hinge Magnet parts requires 6х2 mm magnets or 3x2 mm Also check templates and create something your own! For more info check project site…
Adapter 3/8 square to 1/4 hex bit The way to use on: https://nerd-corner.com/3d-printed-bit-adapter-square-hexagon/ or https://nerd-corner.com/de/3d-gedruckter-bit-adapter-vierkant-sechskant/
This is technically a remix of the Hexes for LEGO mini figures (re-modeled) by @Nat_ Although I have redesigned this in Fusion 360 from the ground up I have marked it as a remix to credit them, please note this reworked version does not…
Organize your workspace in one seamless print! This honeycomb-inspired desk organizer prints as a single piece—no supports, no assembly, no glue. Inside you’ll find: Pen Holder: Tall hexagonal cup to corral pens, pencils, styluses or…
There are locks with different width. Try lock with different width when lock wont fit
I have made extra stands, with a thin base, since I don't use the box Two versions of every stands are provided: one with standard axe clearances, the other with looser axe clearances An alternate version of the pin is provided, also with…
This vase is a tall, hexagonal vase with a taper at the center. Print settings are pretty standard, I used a Creality Ender3 Pro.
19.04.2026 rev. II I've added holder with 7 slots for more screwdrivers A compact, self-standing organizer designed specifically for hex screwdrivers. Perfect for keeping your desk or workbench neat and tools always within reach.…
Description Keep your desk organized in style with this minimalist hexagonal pen holder , designed specifically for Leuchtturm1917 pens – or any pen with a hexagonal body smaller than 8.90 mm in width. The holder fits up to 4 pens , each…
If the shaft of the rollers breaks easily because of poor layer adhesion use these rollers and a M8x40 hex bolt.
I made a Hexagon Coaster so mugs would no longer leave a condensation mark on the table. Category: Kitchen & Dining
The hex bit holder is universal. You can hang it on the wall in your workshop, but if necessary, you can easily remove it, close the lid and put it in your pocket. You can use 5x1 magnets for reliable fixation of bits, there are recesses…
English (This translation is computer generated): Instructions: Roll the dice to see which hexagons you can move, swap them and try to connect sets of three or more matching hexagons. The winner is the one who collects the most hexagons.…
For aligning hexagons with an edge length of 150mm 25.4mm (1in) apart.
Make your bits fit deeper and tighter
This is a 1/4” Hex bit box designed to be fitted with Milwaukee tool belt hook so it can be worn on a belt. Box and bit holder are a close fit, I printed this in TPU, though it should work in any filament, perhaps needing a bit of finish…
This is a remix of the "Hexagonal Spool for the Prusament Refill System" model so that it fits on a Prusa Mini+.
![Hex Bit Holder [Portable/Wall Mounted]](https://media.printables.com/media/prints/ee5151fb-17c4-4ff9-a88f-2ee4c7895847/images/10139987_dbb3b10b-0b20-404d-9673-b2953ca5d556_3ba876a1-618f-414e-b3a9-17394cb31d5c/photo_2025-07-02_08-41-35-3.jpg)
