Parametric Hexagonal Dobble Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric box for Dobble (Spot-it) card game.
- Ocena
- 4 / 5
- Polubienia
- 14
- Pobrania
- 141
- Wydruki
- 1
- Wyświetlenia
- 534
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Public Domain
Simple hexagonal box for your circular cards.
OpenSCAD model included so you can adjust dimensions to your needs.
Recommended print settings
Resolution: 0.15
With higher layers the thread will get a bit rough. With lower it will be smoother. 0.15 worked for me well.
Supports: No
OpenSCAD
OpenSCAD file requires BOSL library(https://github.com/revarbat/BOSL ) to work.
You can simply adjust diameters, height, whether to generate hole at the bottom (for easier access to cards).
Recommended values
d_inner: Diameter of cards + 1mm
h_inner: Height of the stack + 3-5mm
d_finger_hole: 15-18mm for easy access
use_stoppers: Whether to generate small dots in the corners that should keep the box closed.
stopper_offset: Adjust according to you d_inner. Dots should be as far in the corner as possible, but still keep at least 2 perimeters.