Parametric Hexagonal Dobble Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametric box for Dobble (Spot-it) card game.
- Rating
- 4 / 5
- Likes
- 14
- Downloads
- 141
- Makes
- 1
- Views
- 534
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Public Domain
Simple hexagonal box for your circular cards.
OpenSCAD model included so you can adjust dimensions to your needs.
Recommended print settings
Resolution: 0.15
With higher layers the thread will get a bit rough. With lower it will be smoother. 0.15 worked for me well.
Supports: No
OpenSCAD
OpenSCAD file requires BOSL library(https://github.com/revarbat/BOSL ) to work.
You can simply adjust diameters, height, whether to generate hole at the bottom (for easier access to cards).
Recommended values
d_inner: Diameter of cards + 1mm
h_inner: Height of the stack + 3-5mm
d_finger_hole: 15-18mm for easy access
use_stoppers: Whether to generate small dots in the corners that should keep the box closed.
stopper_offset: Adjust according to you d_inner. Dots should be as far in the corner as possible, but still keep at least 2 perimeters.