Hex low profile toolless Prusa i3MK3/S squash ball feet damper vibrations/noise isolator
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Different look of toolless low profile MK3 squash ball feet by @Osfald
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 36
- Makes
- 1
- Views
- 462
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of @Oswald's squash ball feet V5 (slimmer one).
This design changes the look to be hex and more chonky.
Used parts
- 4x PERFLY two yellow dot squash balls from Decathlon (one for each leg)
My print settings
- PETG
- 0.4 nozzle
- 0.2 layer
- 15% gyroid infill
- 5 top & bottom layers
- supports ONLY around aluminum profile insert
Printed it on Prusa MK3s. Positioned it upside down (uses more filament and time), to take advantage of textured bed… But you don't have to!
Do not remove any parts of your printer to install these feet! No end plates or caps need to be removed! Simply angle the feet and slide them into the frame aluminium profile BOTTOM grooves. Insert feet at an angle and then level. I have designed them accordingly to use such shape fitting. You don't have to use any screws or dismount the frame.
– @Oswald