Search results: damper

Counting matching models…

Printables

3T22 Damper Ball Bearing Conversion

This is a direct bolt in replacement for the brass bearing plate on the solenoid box side. Uses an R8-2RS bearing. Only works on early dampers with the round shaft.

Order a print of this model

Printables

The "5th leg" for K1C - anti-vibration TPU damper for the bottom plate

This part aims explicitly at vibration noise damping of the printers bottom plate in a very primitive fashion - by pressing the plate upwards from the outside. In my case a damper between 24mm (minimal) and 25mm (best) does the job. A…

Order a print of this model

Printables

Ender 3 S1 Pro - yAxis Damper Mount

This part replaces the original yAxis stepper mount. It will definitely work with the Ender 3 S1 Pro (it might work with the non Pro, but I haven't tried it). One stepper damper (like this https://amzn.eu/d/3gLBPet) is required.…

Order a print of this model

Printables

TPU Vibration Damper & Spacer for Motorcycle Phone Mounts

This is a flexible TPU spacer designed to bridge the gap between thin motorcycle mirror stems (or windshield bars) and standard phone holder clamps. Most phone holders are designed for handlebars with larger diameters. These adapters…

Order a print of this model

Printables

Flexible TPU Air Compressor Foot Damper 45x6

Motivation For a sandblasting project I used an old air compressor. The compressor has two wheels and two steel feet measuring 45x6mm. When operating the compressor, the vibrations cause some movement of the compressor feet on the ground.…

Order a print of this model

Printables

Lexus UX Hood/Bonnet gas strut/damper bracket shim

I liked my older car that had gas cylinders to raise the engine-bay hood. The USA market Lexus UX has a rod you manually put in place instead. I purchased a ~$30 kit on Aliexpress similar to this one on Amazon which worked OK, except…

Order a print of this model

Printables

Vibration Damper Simracing stand feet

Mounting bracket for simracing to isolate vibrations. Print inside from TPU. M8 screw hole in the middle.

Order a print of this model

Printables

Pearl Snare Drum Verschraubung des Dämpfers, Pearl snare drum, screw for the damper

Die Verschraubung des Dämpfers meiner Pearl Snare Drum war defekt und ich habe das Teil nachkonstruiert. Es passt super und vielleicht hat ja auch jemand diese Problem, deswegen stelle ich es hier ein. The screw for the damper on my Pearl…

Order a print of this model

Printables

Kyosho Mini Z Damper Spring Preload Clips

Kyosho Mini Z Damper Spring Preload Clips. Seen a lot of people using zip ties, which I wasn't a fan of so I created these in a variety of thickness. You can load 2 of these clips onto the damper to preload the spring and are easily…

Order a print of this model

Printables

Olivetti Lettera 22 Rubber Damper / Silentbloc

Replacement rubber damper (silentbloc) for the Olivetti Lettera 22 typewriter from the 1950s. These dampers connect the carriage to the chassis and absorb vibrations during typing. Over time, the original rubber hardens, cracks, or…

Order a print of this model

Printables

Blum hinge damper adapter with snap fit (thicker flanges)

This is quick remix of Thomas H 3D 's Blum hinge damper adapter. It has the default values of that model (5mm screws with a distance of 32mm) as that works perfectly with the IKEA Billy bookcase.

Order a print of this model

Printables

Inmotion V11 pedal damper

Inmotion V11 pedals dumper replacement. Print using TPU, 100% infill

Order a print of this model

Printables

Winmau Rota Lock damper Dämpfer

Einfacher Dämpfer für das Winmau Rota Lock System. Entkoppelt die Wand von den Rota Lock Verbindern. Kein komplettes "Silence System" aber einen kleinen Effekt hat es. Druckeinstellungen: Material: TPU Wände: 2 Oben/Unten: 3 Infill: 5%…

Order a print of this model

Printables

Slim Washing Machine Anti-Slide / Damper Foot

Standard washing machine feet feature a wide base to optimize load distribution and increase friction, ensuring the machine remains stable during operation. If the machine is to be placed on a slim pedestal or on another machine, there…

Order a print of this model

Printables

NAKED DAMPER, SILENTBLOCK, ANTI VIBRATION FEET for MK4, MK3, TPU, F3D file

MK4 "Naked" Gyroid Dampers (TPU) - Anti-Vibration Feet Summary Sponge-like vibration dampers for the Prusa MK4 printed in TPU. Uses exposed Gyroid infill. Requires specific slicer settings (Vertical Shell Thickness OFF)! Description These…

Order a print of this model

Printables

SKS edge AL Mudguard Damper

Can be used as replacement for SKS Mudguard damper. Should be printed with flexible material like TPU.

Order a print of this model

Printables

Padel Vibration Damper (Shockout Absorber)

TPU Printable Shock Absorbers for Padel Rackets Upgrade your comfort and performance on the court with these custom TPU shock absorbers designed for padel rackets. Engineered to minimize the transfer of vibrations from the racket to your…

Order a print of this model

Printables

Soft-close damper for IKEA Bestå

3D printable replacement plastic part for a soft-close drawer mechanism. Restores smooth closing if the original insert is cracked or broken. Recommended material: PETG or ABS for durability.

Order a print of this model

Printables

1992 Ducati 851 & 1993+ 888 gas tank spacer for Ohlins steering damper mount

Gas tank spacers for the 1992 Ducati 851 and all 1993+ 888 motorcycles. These spacers allow the gas tank to be raised either 3.5 or 4mm, to clear the frame mounting bracket for an Ohlins steering damper. Spacers are placed between the…

Order a print of this model

Printables

Tennis damper

its a tennis damper with multicouler you can print it with no ams.

Order a print of this model

Printables

Voron 0.1 / 0.2 Bed Mount Spacer for Silicone Dampers

This spacer is designed for silicone bed damper mounts on the Voron V0.1 and V0.2 heated bed. In some setups the adjustment range of the bed screws is limited or the heated bed sits slightly too low. These spacers raise the silicone…

Order a print of this model

Printables

Rotary Damper v1.0 for Mark Ayton's Speedbrake and Flaps mechanism for A320

I could not find the Rotary Damper on the Market or only for high prices. So I created this part myself. Additional material: What you need is an O-ring with 8 mm and 1,5 mm thickness as well as silicone oil. I used a viscosity of 30000…

Order a print of this model

Printables

RC CAR SHOCK DAMPER TOP JOINT

Top joint with implemented hex nut for Koswork/ Exo Design/ Xtra Speed big bore dampers. Small play for smooth movement allowed purposely. Versions by the evolution. Now I find best V3 and V2 www.embieracing.com

Order a print of this model

Printables

Givi MonoKey damper plug

These plugs deteriorate and often get lost. Printed with prusament TPU95, at 4 perimeters and 50% gyriod infill. Reduced speed.

Order a print of this model

Printables

Damper bushing Passat b3 VAG 052 129 669 A

Демпфер-втулка корпуса воздушника, тестил на Пассате б3 g60 syncro, по каталогу идет на приличное количество машин VAG семейства Damper bushing for the air filter housing, tested on a Passat B3 G60 Syncro, also fits a large number of VAG…

Order a print of this model

Printables

Damper feet for DS920+

Damper feet for Synology DS920+ . Print in TPU 98A with 5 perimeters note : after day of use, the best mod is velcro (the soft side, not the hoock side) under the disks

Order a print of this model

Printables

(Extra) Low-Level Heatbed Standoffs / Dampers / Leveling Colums / Spring Replacement for the ELEGOO Neptune Heatbed springs

The existing springs on my ELEGOO Neptune 4 Pro printer have been quite crooked / bent. For better stability I always tried to keep them as low to the bed as possible, but the maximum compression led to a quite uneven bed. For other…

Order a print of this model

Printables

BLV - Silicondamper Mount for heatbed

If you use silicone dampers on your heated bed instead of the springs, the original bed holders are too small. So here is the modified version suitable for the silicone dampers Category: 3D Printer Accessories

Order a print of this model

Printables

Hinterradfederung, Dämpfer, Attrappe // Rear wheel suspension, damper, dummy

Hinterradfederung, Dämpfer, Attrappe Als Stütze für ausgetauschte Dämpfer, als Deko oder sonst was. Als Modell diente eine X Fusion o2 RL (Lochabstand 19cm) ______________________________ Rear wheel suspension, damper, dummy As a support…

Order a print of this model

Printables

NEMA 17 stepper damper

Your 3D printer is too loud? Try these stepper dampers. Not only will they dampen sound, they can also reduce vibration.

Order a print of this model

Printables

Morris Hood Damper

Morris Hood Damper for 70's vintage Morris Marina car Filament used TPU - Filatech FilaFlex 40 Black Print settings Nozzle size 0.4 Layer height 0.1 Infill 0% Variable Layer Height: Adaptive 0.00 / Smooth radius 1 Printers > Custom G-code…

Order a print of this model

Printables

Toilet seat damper / WC Seat Bumper - Toilettensitzdämpfer / WC Sitz Puffer

EN This is a replacement for worn toilet seat bumbers. It was printed by me in not too soft TPU, with three Perimeter (Bottom & Top) and something with 50% infill. So far they have held without any problems. The model file for FreeCAD is…

Order a print of this model

Printables

Prusa i3 MK3S - Noise and Vibration Damper Feet

IF YOU KNOW THAT THESE WORK WITH OTHER PRINTERS, PLEASE COMMENT AND I WILL UPDATE THE DESCRIPTION! Noise and vibration damper feet for your Prusa that install just like those silly little rubber ones in the kits! These bad-boys will…

Order a print of this model

Printables

HONDA XRE 300 EXHAUST RUBBER DAMPERS FOR HEAT SHIELD

TPU 100% INFILL

Order a print of this model

Printables

Prusa I3MK3/s/+ Damper-feet / Standfüße

Just clip the parts together. You can plug it into the aluminum profile of the MK3. The stiffness of the damper can be adjusted in the slicer. Just change the height of the parts so its thicker.

Order a print of this model

Printables

Creality K1 Max - Top Riser with Damper

This is my version for of a top riser for a Creality K1 Max. If you like you can tip me via paypal: https://paypal.me/crazYm1nd Since printables.com does not support markdown (copy/paste) in the description I have created a PDF and a…

Order a print of this model

Printables

Noise-Reducing Damper for Wilson Baiardo Stringing Machine

Noise-Reducing Damper for Wilson Baiardo Stringing Machine Effectively reduces the loud noise produced when the clamp drops, creating a quieter workspace. Dimensions Inner hole ø14.1mm Outer ø17.1mm Filament used TPU - Filatech FilaFlex…

Order a print of this model

Printables

Peopoly Magneto X TPU Damper

Peopoly Magneto X TPU Damper to be able to mount long stepper like the Nema 17 LDO-42STH48-2504AH.

Order a print of this model

Printables

Feet Vibration dampers for Prusa 3D Printer

UK: Google Translate Feet Vibration dampers for Prusa 3D Printer I have made a "sandwich" construction with the rubber material "Spectrum 90A S-Flex" and the plastic material "PETG Prusament" to improve vibration damping. I think it has…

Order a print of this model

Printables

Simple adapter to tighten GS500e damper rod

To assemble the forks, you need a tool to hold the damper rod and torque the damper rod bolt. I used this in a Suzuki GS500e but you can use it in any motorcycle that has a 24mm damper rod. Before using, insert the tool in the damper rod…

Order a print of this model

Printables

Adjustable Lack Feet with TPU Damper

Adjustable lack feet. I needed some for my tables since I stack two lack tables ontop of each other. There are two types main feet, one which only uses four screws, and one which uses 7. Print one main, and one cylinder part and the tpu…

Order a print of this model

Printables

Air Vent damper KG Rohr / Lüftungsklappe D=110mm

Deckel um ein KG-Rohr zu schließen. Fliegengitter ist eingedruckt.

Order a print of this model

Printables

4in Inline Damper

This is a 4 inch inline damper for air systems. Can be printed as one piece, may require some sanding to make sure everything moves smoothly. The actuator I used was a Belimo TFX24-3, but the damper rod is a standard shape for other…

Order a print of this model

Printables

antivibration feet, vibration damper for mk4 with or without enclosure

models are printed from TPE, but TPU can be used too. For this to work u print 2x antivibrationsupport and 4x antivibrationsupport 2. The first ones are on the frame behind motors and antivibrationsupport 2 are used always pair. One pair…

Order a print of this model

Printables

silicone hose universal vibration damper [parametric]

This is designed to use silicone hose to damp vibrations. It works well with 21mm OD - 12mm ID silicone hose. Both f3d files are parametric. You can easily change them to your needs. → in fusion360 → design → solid → "modify" dropdown…

Order a print of this model

Printables

K1 Max Lid Handle/Cover for Top Riser with Damper

I have printed the: https://www.printables.com/model/1041863-creality-k1-max-top-riser-with-damper but was slightly bothered by the lid handle being missing, since I had to fit the glass top and there was not enough space with it…

Order a print of this model

Printables

Vibration damper

Vibration damper for 3D printers recommend material soft TPU

Order a print of this model

Printables

Ender & CR-10 X Axis Cover and Nema 17 Stepper Damper Spacer

The Problem: I wanted to reduce the noise coming from my steppers during prints at night but wanted to try to print in TPE instead of buying the dampers. The hardware required for the x-axis spacer is hard to find and needs to be 3mm…

Order a print of this model

Printables

Damper cuting jig

Self-locking nut M3 and M4 and standart nut M6. Screws 3x15, 4x25 gate screw 6x40

Order a print of this model

Printables

Archery Cherry Blossom Stabilizer Damper

This is an archery damper based on the pedals of the cherry blossom flower. This has ¼-20 threads and its durometer can be adjusted based on your infill parameters. I printed this with TPU on an Ender 3 S1 Pro

Order a print of this model

Printables

Prusa MK3/S/S+ Vibration Damper

Print instructions Printed with Recreus Filaflex TPU filament (82A Shore). Filament settings in PrusaSlicer "Generic FLEX", bed heating is not required. Infill 10-15%. To protect the PEI surface, use a hairspray/printer varnish or glue…

Order a print of this model

Printables

Prusa MINI Enclosure Damper Extension (for squash ball feet)

If you have squash ball feet on your MINI and wish to use the dampers that come with the MINI enclosure, you will need: - Print 2 of these extensions - x2 35mm M3 bolts The extensions and 35mm bolts should be added to the dampers on the…

Order a print of this model

Printables

Tamiya DT-01 -- Damper Parts (last updated 2025/06/18)

This entry should contain replacement parts for the friction dampers on a DT-01. These dampers are stock on the following models: All models using the Tamiya DT-01 chassis ("Rookie Rabbit", “Fighter Buggy”, “Mad Bull”, “Mad Fighter”…

Order a print of this model

Printables

UpRight - dampers adjustment jig

You will need a magnet 40x10x7 (6x) - holding force approx. 9kg. 6x screw (worm or threaded rod) 3x25, threaded insert M3x5,6mm

Order a print of this model

Printables

Door stopper with two-stage damper

Safely holds a door open and prevents it from closing on its own. The two-stage damper design dampens slamming (e.g. wind). Clip-on width 14mm. With different positions on the door, the desired open position can be set. We use it because…

Order a print of this model

Printables

Riello RDB burner damper

This is a replacement damper door for the riello rdb burner, this can only be bought as part of the entire air box (Approx €60). a boiler service guy asked if i could make this so i did, he says it works perfectly.

Order a print of this model

Printables

Heating bet Dampers / Heizbett Dämpfer

Dies ist eine Gießform für runde Dämpfer mit 22mm x 15mm und 4mm Loch. Diese können bei sehr vielen Druckern unter dem Heizbett als Ersatz für die federn genutzt werden. Dies erspart Euch ständiges nachjustieren durch den Verschleiß der…

Order a print of this model

Printables

Longer Damper Insert (M3 30-40mm)

I installed the squash ball feet mod on my MK4 inside of the Official Prusa Enclosure which raised the height of the printer making the original damper inserts too short. I have remixed them to make use of M3 screws of either 30, 35, or…

Order a print of this model

Printables

washing machine - dryer stack tpu damper

These shock absorbers should serve to absorb the vibrations and noise produced by the dryer when it is stacked on the washing machine. Obviously they must be printed in TPU. The maximum diameter of the feet of the drying machine is 54mm…

Order a print of this model

Printables

Jonsbo N3 Damper Mod

This Mod decouples the HDDs a little bit more (to be specific, the lower hdd tray and the backplane). This Mod is experimentell. You need 11 Bottom Damper and 7 Top Damper. they are installed in the lower tray (4 Bottom Damper) and the…

Order a print of this model

Printables

Ulka EX5 vibration damper for Vibiemme Domobar Junior and others

Use TPU, something like Shore 80A or 30D. Prints without support. Makes my machine run smoother and quieter.

Order a print of this model

Printables

FreakyFoot V2 - anti-vibration damper feet (HULA)

This is my variant of an anti-vibration damper feet (based on the HULA seismic damper concept). The idea is to damp fast movements only in x and y direction but be stiff in z direction. I printed it with ASA, Nozzle 0.4mm, Layer Height of…

Order a print of this model

Printables

squash ball damper - toolless

Squash ball damper which can be assembled without any tool. My Prusa got extremly silent after the assembly. ball diameter: 40mm

Order a print of this model

Printables

Technics SL-1500 Damper Feet

Technics SL-1500 Damper Feet Filament used ColorFabb VarioShore TPU - 92A Print settings Nozzle size 0.6 Layer height 0.20 Detail Infill: 0-2mm: 30% Gyroid >2mm: 0% (no infill) Layers and perimeters: Solid layers > Top: 6 Ensure vertical…

Order a print of this model

Printables

Vibration damper

Damper I designed for an RV water pump platform Print Settings Printer Brand: Prusa Printer: I3 MK3S **Supports:** No Filament: NinjaFlex TPU Category: Automotive

Order a print of this model

Printables

Ender 3 (or any 40xx extrusion) spring feet damper

Damper feet for Ender 3 ( can be used with other 40xx extrusions too). Performance of this model can be adjusted by using 4 or 5 springs or by using different hardness spring. *2019/8/8 update: Added 16mm version for using with 16x20 mm…

Order a print of this model

Printables

3T22 Damper Ball Bearing Conversion

This is a direct bolt in replacement for the brass bearing plate on the solenoid box side. Uses an R8-2RS bearing. Only works on early dampers with the round shaft.

Order a print of this model

Printables

Anycubic Chiron Silikon Dämpfer Gießform / Damper Mold

Anycubic Chiron Silikon Dämpfer Gießform / Damper Mold 24mm

Order a print of this model

Printables

120mm Fan Damper

120mm Fan Damper with 4mm thickness. Gives extra Space and also absorbs some vibrations. Print in TPU for vibration damping.

Order a print of this model

Printables

Corsair Carbide 200D case fan spacer/damper TPU

TPU gasket to stop the vibration from the fans. Original part disintegrated. No support needed.

Order a print of this model

Printables

Prusa MK3s Y motor holder with double damper

Prusa MK3s Y motor holder with double damper for fight against motor rotating with belt tension. It will reduce the vibration of the frame when the bed move quickly. Need short the belt to 1 tooth for be tightened. Need 2x M3x35mm screws…

Order a print of this model

Printables

overengineered subwoofer damper

.. see photo :) required really good cooling, used PETG for more flex. Filament ist PETG Silver from Extrudr Print Settings Printer: Kossel Delta Printer Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Notes: i used support for the…

Order a print of this model

Printables

Wahoo Kickr Core Rubber damper

The Kickr Core transmits its noise extremely strongly on wooden floors. You can hear it throughout the house, especially at high speeds and sprints. The rubber dampers stop the noise significantly. Recommended printer settings for a 80 kg…

Order a print of this model

Printables

Chair Leg Damper

It makes a lot of noise when my children move their chair around. This dampers help to reduce it. Printed with TPU.

Order a print of this model

Printables

Doc Green (Xiaomi M365, Pro and Mijia) E-Scooter Anti Vibration Damper 0.2mm to 2mm

Designed specifically for the Doc Green ESA 5000 (Xiaomi M365 / Pro clone) E-Scooter (periodically sold by Lidl) but potentially compatible with the Xiaomi M365, Pro and Mijia versions too (no guarantees however). These Vibration…

Order a print of this model

Printables

YJ Wrangler mirror damper

I made this so I can better utilize my rear view mirror in my 1993 Jeep Wrangler while driving. As is, it vibrates too much to be able to use it much, so I printed this in TPU and it seems to help!

Order a print of this model

Printables

The "5th leg" for K1C - anti-vibration TPU damper for the bottom plate

Order a print of this model

Printables

Ender 3 S1 Pro - yAxis Damper Mount

Order a print of this model

Printables

Playstation 5 PS5 PRO & SLIM Anti-Vibration vibration damper rubber mat - better airflow cooling

I designed a vibration damper for the Vertical Stand of the Playstation 5 PRO & SLIM Increasing the base also improves airflow and thus cooling. You can choose: 10 mm thick with logo 10 mm thick without logo 5 mm thick with logo 5 mm…

Order a print of this model

Printables

Tamiya DT-01 -- Front damper stay (including body mount)

This is my printable replacement for the front damper stay on the Tamiya DT-01, labeled as the front body mount in the manual, as it includes that. I currently believe there to be only one variant, unlike the rear body mount, as used on…

Order a print of this model

Printables

Proto Core One Leveling platform damper

I created a first prototype for a test for the final adjustable leveling damper I'll make for the core one. This one is general and can apply to any flat surface. I used a 1" thick sorbothane disk that was nearly 2" in diameter. The inner…

Order a print of this model

Printables

Steambow Stinger II Damper Side Rail

Update: Added the softer string stopper file. The other one was a bit stiffer, depending on the material used. This is a Steambow side rail set with string stops that I designed for fun. This is best used on the Stinger II Compact, which…

Order a print of this model

Printables

vibration dampers for Prusa Core One Feet

Ive designed this vibration dampers for Prusa Core One Feet from David Warboss ( https://www.printables.com/@DavidWarboss ). Here you can find the the feets from David Warboss: https://www.printables.com/model/1104042-prusa-core-one-feet…

Order a print of this model

Printables

parametric TPU bumper / damper for round door stop (Fusion file available)

Parameter Name default value inner_diameter 61.4mm height 14mm thickness 7mm Print - 0.15 - 0.2mm layer height - 2 walls / perimeters - 5-10% infill (i used 7% gyroid) - max. 40mm/s print speed - no supports needed Do you like my work? I…

Order a print of this model

Printables

Nema 17 Damper Spacer

Spacer for a Nema 17 motor damper For this damper : https://fr.aliexpress.com/item/Amortissement-Anneau-Rond-Support-NEMA17-42-Stepper-Moteur-3D-Imprimantes-Pi-ces-Amortisseur-Cadre-Partie-Coussin/32902739737.html ------ Happy Print to…

Order a print of this model

Printables

VIBRATION DAMPER V1 (TPU)

I added sphere shape to the bottom of the print originally posted by @NilsB_1969049, so it could dampen vibration better, because print speed of 180mm/s its enough to make my whole desk vibrate and it is so annoying. I tried with the…

Order a print of this model

Printables

Sovol SV01 Bed Washer for Printbay Silicone Dampers

A little help to get your heat bed higher.

Order a print of this model

Printables

universal TPU clothes horse feet damper / silencer (4 sizes)

Summary Clothes horse / dryingrack feet made of TPU for a secure stand, to prevent slipping and for quiet movement. Also ideal if the clothes horse is placed in the bathtub. Different sizes for many pipe diameters. Print - 0.15 - 0.2mm…

Order a print of this model

Printables

Coilover Damper Extension Caps

A simple cap for coilover damper extensions. I had noticed my extenders were rubbing against my C pillars, so I made a cap to prevent a bunch of ugly scaring! Designed with a simple knurling for easy adjustment and a cool look. Printed…

Order a print of this model

Printables

TPU Vibration Damper & Spacer for Motorcycle Phone Mounts

Order a print of this model

Printables

Record Player Foot Damper Replacement

Replace foot damper for an old record player. If you need more informations about the files, feel free to comment or contact me. Unfortunetly I dont know the exact model of the record player. I just designed the file to fix the problem. I…

Order a print of this model

Printables

HVAC air conditioner sound damper for external case (vibration control)

My HVAC external unit started to make weird noises because the external case vibrates a lot. Need to fix this ASAP in order to not annoying the neighborhood. External whaser need to be printed in ASA in order to last long, internal whaser…

Order a print of this model

Printables

Damper for 10" Car Subwoofer

Damper for typical cheapo 10" Car Subwoofer: Size: approx. 345 260 68mm Max Output Power: 600w / RMS Power: 180W Print Settings Printer Brand: Creality Printer: Ender-3 V3 KE **Rafts:** No Supports: No **Resolution:** .2 Infill: 30…

Order a print of this model

Printables

Vibration damper for a 3018 CNC milling / engraving machine

Vibration damper for a 3018 CNC milling / engraving machine Take the 20mm thick foam from the packaging and cut it to fit. This works very well. You can also experiment with different types of foam rubber for optimal cushioning. Cut the…

Order a print of this model

Printables

20X20 Profile Damper

X and Y - axis of a damper should be rigid to prevent wobbling of the machine. This can easily be achieved by adding a 90° turned second foot for each corner. Cartesian Arts fine model has been turned and a spacer was added.

Order a print of this model

Printables

SV08 Enclosure Vibration Damper

Press these vibration dampers (I recommend 3 per panel) into the “egg-crate” design of the printer to pinch the enclosure panel against the base. No gluing is necessary. There are different versions for different thickness panels, up to 4…

Order a print of this model

Printables

Volkswagen climate control damper actuator rod V159

100% заполнение ABS или PETG update ver.1.1 - убран пропил в звездочке для большей жесткости.

Order a print of this model

Printables

Beechcraft Shimmy Damper Tools

Apologies for no pictures of final parts, I will try to get them up. This package has a few tools for Beechcraft shimmy dampers. These tools are used as the shimmy damper instructions on the CSOBeech.com website. The first is a block for…

Order a print of this model

Printables

Kawasaki Ninja 250 Fuel Tank Bushing/Bumper/Damper

Replace your missing, shrunk, or hardened rubber mount bushings on your old Ninja 250's fuel tank. Print with TPU. I used Bambu's standard 0.2mm setting. Might fit other models, if the measurements match.

Order a print of this model

Printables

Damper mount for Kugoo Kirin G1 pro

Print using PA-CF or PA-GF with at least 5–7 walls and 35–40% gyroid infill. Print the front part without supports—it is designed with sacrificial layers. Print the back part with supports, using the orientation shown in the orca…

Order a print of this model