Vibration Damper / Anti-Vibration for Anycubic Kobra
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.21 – €0.26 net (excluding VAT)
For file: CFFFP_AnycubicKobra Vibration Damper.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.24 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 12 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Dampen the vibration caused by printer movement with these attachable feet
- Rating
- 0 / 5
- Likes
- 47
- Downloads
- 313
- Makes
- 0
- Views
- 3,274
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution
I made these feet to increase the height of the Anycubic Kobra as well as get anti-vibration properties. This is very similar to the anti-vibration feet you can find for the Prusa but these have circle holes that can slip directly into the rubber feet. Depending on the surface you place your printer, you may or may not need to add some rubber/TPU to keep the printer in place if the material you use to print can slide around your desk.
Print Details
- Remove Top Layer, set it to 0
- Remove Bottom layer, set it to 0
- Remove Infill
- Use at least 3 walls/perimeters for strength
- Add supports to get cleaner peg holes
- Should print fine on the uploaded model orientation
I printed these on my Anycubic Kobra using a 0.8mm nozzle at 0.4mm layer height using PETG.