1 / 3
Vibration Damper / Anti-Vibration for Anycubic Kobra — zdjęcie 1
1 / 3

Vibration Damper / Anti-Vibration for Anycubic Kobra

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dampen the vibration caused by printer movement with these attachable feet

Ocena
0 / 5
Polubienia
47
Pobrania
313
Wydruki
0
Wyświetlenia
3274
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I made these feet to increase the height of the Anycubic Kobra as well as get anti-vibration properties. This is very similar to the anti-vibration feet you can find for the Prusa but these have circle holes that can slip directly into the rubber feet. Depending on the surface you place your printer, you may or may not need to add some rubber/TPU to keep the printer in place if the material you use to print can slide around your desk.

 

Print Details

  • Remove Top Layer, set it to 0
  • Remove Bottom layer, set it to 0
  • Remove Infill
  • Use at least 3 walls/perimeters for strength
  • Add supports to get cleaner peg holes
  • Should print fine on the uploaded model orientation

I printed these on my Anycubic Kobra using a 0.8mm nozzle at 0.4mm layer height using PETG. 

Tagi