1 / 3
TPU Vibration Damper - 3030 Extrusion
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple TPU vibration damper for machines using 3030 aluminum extrusion including MK3 & MK4.
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 124
- Makes
- 3
- Views
- 870
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Damper snaps in to 3030 extrusion for easy installation/removal.
Reference settings for 95A TPU and 0.4mm nozzle
Adjust infill density and/or z-scale (damper length) to fit your needs. The Mk3 and MK4 printers have most of the weight on the back side of the printer so I doubled the length of the dampers in the rear to help support the additional weight.
Print vertically as shown in the images
- Top layers: 0
- Bottom layers: 0
- Walls: 3
- Infill type: Gyroid
- Infill Density: 20%
- Line width: 0.5mm
- Layer height: 0.3mm
- Flow: 1.05