Counting matching models…
I recommend using balls with blue dot; they are the hardest. ACCESSORIES Prusa CoreOne/+ You will need 4 M3x6MM screws to fix them to the lower frame; this one has 4 threaded holes in each of the 4 corners as standard. Prusa CoreOneL You…
Update - June 14 2025 Hello everyone, I've updated the model to V2. Based on the feedback I received, I've adjusted the mount so that three M3x10 screws now hold each foot instead of one. This also changed the appearance, but the same…
Front Power Switch added to the wider Prusa Core One L Squash Ball Feet Fits all core models Use organic supports everywhere. 3mf contains my support settings, snap off with ease. If you don't know how to wire this, then this mod is not…
Front power switch installed horizontally for the wider Prusa Core One L Squash ball feet Suitable for all Core models. Heat-resistant adhesive tape: https://www.amazon.de/dp/B0FBFSWYM7?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 Rocker switch…
A little bit Lighter Faster & Sturdier than the original design : Kudos to the original designer, do not hesitate to grab him a coffee by tipping him : https://www.thingiverse.com/dancan13f/designs I used the 2 yellow-points balls since I…
After converting an MK4S to CoreOne+ , I needed better damping for a narrow shelf setup. Existing mods were either too tall or too wide, so I designed these feet to stay low while still using 8 squash balls for effective isolation. There…
Practical stands for the CoreOne. The stand without a switch can be mounted on any corner of the CoreOne. The stand with a switch is available in two versions: left/right. For feet with a switch, an additional M3x10-20 screw with nut is…
This is a 3D scan of a Squashie, turned into a printable model and featured in our YouTube video where we scaled it up and created a giant version. The model captures the original shape and texture of the sweet, making it perfect for…
Increased spherical diameter to support 44mm Intro balls.
Added some embossed numbers in Prusaslicer to Monkeyprints23's design. Now you can keep track of which ball is which!
A simple, single piece squash ball grinder. It has inlays where you can stick sandpaper / abrasive tape. The inlays are designed for abrasive tape with a thickness of around 0.55 mm. The CAD files are provided if you would like to modify…
For my ender 5 pro upgrade journey, I re-located the power switch to the front of the machine. I love this skirt upgrade and wanted to keep the aesthetic of it intact while removing the blank hole where the switch had accommodations for.…
Vibration-dampening feet for the MK3/MK4 . Uses 4x double yellow dot squash balls. I wanted to make a version that does not add height to the printer to make it easier to fit into various enclosures. The design is inspired by several…
If you like my work and would like to see more, please consider buying me a coffee A simple container with a twist lock cap that holds 3 standard double yellow dot squash balls (may work with other sizes but I haven't tested. There are 2…
I really like the design approach of the original, but wanted to see if they can be made with less plastic and have a more open look without sacrificing strength. this is still a WIP, I will need to print them off and give them a good…
Half squash ball feet for Anycubic Kossel plus (20x20 frame delta printer) This is a remastered version.
Fits in the 3.9 mm corner piece holes to mount the remastered half squash ball feet for Anycubic Kossel plus. find the Half squash ball feet for Anycubic Kossel plus (20x20 frame delta printer) here:…
Remixed model, add place for ring and accented eyes. Still printed without support 0.16 layer
Low profile squash ball feet on the back of the Prusa MK4 for screwing
I wanted to have less vibration coming through my new Flash Forge Adventurer 5M printer. I'd previously used Squash Balls on my Prusa Mini+ and wanted to do the same with the 5M. I liked tterbocharged 's design but it was the wrong size…
Remix of simple squash ball damper and z axis support. Keeps the printer low, only 9mm from table to bottom front of printer with use of 1 yellow dot squash ball. Balls can be a little hard to fit, but when they are fully in place the fit…
This is a REMIX of the Prusa mini squashball back foot redo/fix Remixed it to use it with the Raspberry Pi Z-Box Integrated 4B Case for Prusa MINI (REMIX) Print instructions It is a tight fit, make sure your printer is well calibrated if…
Hello, ive remixed Infected by max feets, added voron style M3x4x5 threaded insterts and used Squash ball holders from Mercury One Skirt. Only diference is that i didnt have any M4 threaded inserts so i just used M3x10 with washer and it…
this is a remix of the original low profile feet for v-slot https://www.thingiverse.com/thing:3385254
My sister-in-law found this game at Goodwill and it was missing a piece. This is the missing piece.
I designed a squash ball foot mod for the RailCore II 300ZL based on the original files. Note: Squash ball will feel a little tight when putting them into the feet, just squeeze and rotate. Amazon: 4 x Squash Balls used -…
If you have squash ball feet on your MINI and wish to use the dampers that come with the MINI enclosure, you will need: - Print 2 of these extensions - x2 35mm M3 bolts The extensions and 35mm bolts should be added to the dampers on the…
Probably the simplest squash ball feet for your Adventurer 5m PRO. The main idea behind it was not to upgrade the print quality, but to reduce the vibrations transferred from the printer to the outside world =) I've printed mine upside…
Use stiff material like Polycarbonate, Tough PLA or PET-CF. The model takes m5 screws or smaller sizes, you can find the ones I used here . Make sure they are at least 35 mm tall. For an alternative press design, check this one:…
Use stiff material like Polycarbonate, Tough PLA or PET-CF. The model takes m5 screws or smaller sizes, you can find the ones I used here . Make sure they are at least 35 mm tall. For a more traditional press design, check this one:…
I really liked the improvements that @firetech made to the original @Yosuke design for these squash ball feet but I didn't like that I needed hardware. I found the remix by @TChucks but there was only one height included. As described by…
I designed these feet so that they can use squash balls. Simply insert them into the original feet. Maybe it will work with the Ender 3 V3 Plus or K1/C. I haven't tested it and don't know if the same feet are "glued". I printed it with…
My original plan was to use 4 of these isolators between a platform for my vinyl player and a table, but I didn't finish the project. Should work with any squash ball, I tested using these .
Squash ball damper which can be assembled without any tool. My Prusa got extremly silent after the assembly. ball diameter: 40mm
Remix of the original squash ball feet except changed the diameters of the wholes to fit M3 bolts, as well as attaching M3 T-nuts. For only the squash ball feet, print 3 T-nuts. To use the Z-bracket, print off 7 in total Mats required:…
Parametric half squash ball feet for an Ender S1 Pro and Plus. The Fusion360 file can be adapted to any size. The attached STL is for 43.5mm feet. I wonder what tennis ball feet would look like!
Shock Absorber Feet with 2 yellow Dot Squash Ball. I have been using this design for years on the bottom of my Prusa/Pulse, but I needed them a little taller for room underneath the printer. These should fit just about any printer out…
I wanted to try the whole squash ball feet thing to raise my printer up a little, which would allow me to put my 4.2" touch screen next to the stock screen on my MK3S+. I found one I thought I liked, but it was difficult to print,…
I recommend using balls with blue dot; they are the hardest. ACCESSORIES Prusa CoreOne/+ You will need 4 M3x6MM screws to fix them to the lower frame; this one has 4 threaded holes in each of the 4 corners as standard. Prusa CoreOneL You…
I created this for my CR10s but it can be used on most v-slot based 3D printers. You will need standard squash balls (2 dots) and glue if you want them to stay in place. Print Settings Printer Brand: Creality Printer: CR-10S **Rafts:** No…
Prusa MK4 MK4S Bin - both sides - mod for Snap-on squash ball foot
Remix of the Prusa core One feet v2 to attach Squashballs for less vibration Printed it in PETG, more then 5 perimeters and gyroid 25% Thanks to PrusaGuy/David! Awesome design.
Update - June 14 2025 Hello everyone, I've updated the model to V2. Based on the feedback I received, I've adjusted the mount so that three M3x10 screws now hold each foot instead of one. This also changed the appearance, but the same…
The slot was modified to fit 20mm aluminum v-slot. Note: On an SV06, it will interfere with the display mount, so you need to slide it until it clears, but it doesn't seem to hurt printer stability.
These tall squash ball feet make sure there's enough air circulation under the Quidi and therefore enough cooling for it's electonics is possible… when doing high temp Printing, for example PA12 at 280°C Nozzle Temp, and 100°C Bed…
I tried a couple of the other foot designs available, and I was really disapointed. They were weak or complicated to install, and none survived moving the printer in and out of the enclosure. Design goals: Strength: ability to hold the…
The idea behind these feet was to find the best possible equation among 4 variables: they should be solid enough to firmly hold the heavy printer in place (should be reasonably massive ); they should be wide enough to mitigate as much…
An articulated squash with dangly articulated legs. No supports necessary.
用起来晃来晃去的，很好玩:D。加标志，降高度use40mm ball .Added the voron logo. Reduced the overall height and lowered the overall center of gravity of the printer!
This is a remix from https://www.thingiverse.com/thing:2764602 Small legs for replace the original legs. increasing i3 mega height to permit myself to mount 120mm fans & also mount my raspberry under the machine. M5x20mm hexagonal screws…
Off-Duty in the Outer Rim Collection: Vaders “Sith Squash and Vine” a Gourd Hobby Farm. The getaway from Mustifar is a remote swamp island on Felucia. Vader grows his crafts gourds here and is well known for the quality of birdhouse gourds.
Highlights: Noise Reduction Improved Stability. Reduces VFA & Ringing/Ghosting. 6 Support Points without increasing operational footprint. BOM: Print 6x Foot & 6x M6 Slot Nuts 6x Squash Balls (double yellow dot) 5x M6 x 12mm Bolts 5x M6…
Also the opportunity to install the damper feets inside of the Bear frame. Simple and fast to print. Similar print setting for the Bear Upgrade parts recommended: 5 Top / Bottom Layers 4 Parameters 20% Infill No Support required Have pfun…
This foot fits the Core One printer exactly and is secured to the bottom of the printer with a screw. I use two yellow point squash balls, they dampen a lot of the printer's vibrations and are much quieter. I added another model, if you…
I had a specific issue in that the cabinet on which my Core One stands, is short of a few cm's for the printer. Without feet it did fit with full feet but with the squash ball feet, the ball would be on the edge of the cabinet, risking…
I love this design by Kamil Kaleta. Just made mine a little bit thicker and added some fillets.
Vibration damping is excellent. I used balls with one red dot. When comparing the prints before and after, I didn't find a difference in quality. I printed from petg.
Remix of Evocato's Prusa Mini Squashball Feet. I printed one and pressed on the top part that goes into extrusion. It broke under some pressure, so I redesigned it. I also hated how thick it was. This was a mission to get some squash ball…
Only 20mm high gives you the opportunity to install the damper feets also inside of the Bear frame. Simple and fast to print without support. Similar print setting for the Bear Upgrade parts recommended: 5 Top / Bottom Layers 4 Parameters…
I failed to order the Anti-vibration feet when I pre-ordered the Centauri Carbon, thinking it would be fine. Then I saw it in action on a particularly fast part. The thing nearly walked off my small cabinet. “Can't have that,” I thought.…
Remade the design to get rid of artefacts in the faces, provided is the f3d and step (use the .step for printing)
Remix of the Z bottom part to put the squash ball feet from erickson85 on a Dual-Z modded Prusa MINI.
I saw the Gen2 storage system and knew I had to print it. I had already printed some squash ball feet that I liked. I had the balls already. But they weren't tall enough to use with the drawer. So I made them taller to work with the Gen2…
UPDATE: A new improved model can be downloaded from here . Something that was longtime postponed - Vibration dampers. If you want a really quiet printer, you can use these great looking vibration absorbers based on squash balls (two…
Feet that use double yellow dot squash balls to limit vibration. These ones are customized to fit the Neptune 3 Pro.
just another quash-ball damper. I designed my own with a super low profile. It works great! Print instructions Print everything in PETG. You need 8 M3x10 screws and nuts and 4 squashballs. I use one yellow dot.
I wanted to add Gen2 drawers to the core one. I like the squash ball feet, but they were too short. I made the taller version. Normally one screw holds the foot in the Core One. That is OK for the shorter version. With the longer version…
Squash ball feet they are good for vibration elimination, the squash ball is in diameter 39,5mm.
Support needed. This feet is suitable for LCD + Hyperpixel 4" touchscreen
🇺🇸 ENGLISH VERSION Cookie Cutter and Stamp inspired by the Squash plant from Plants vs Zombies. Great for creative baking and themed decorations in cookies, biscuits, fondant, bread slices, cheese, clay, and more! Squash (66x80x12 mm)…
Squash Ball Upgrade Upgraded squash ball design for printers with squash ball feet *Allows modification of infill and wall thickness. I have been getting about 3-6 months out of my squash ball feet until they are damaged from the weight…
This project allows for installing two stacks of: Expandable Steel Sheet Holder (MK & MINI)Expandable Steel Sheet Holder (MK & MINI) in the space below the printer. Printing instruction: - Print two stacks of Expandable Steel Sheet Holder…
More stable version of Hexx's Squash ball feet. Uses the original screws to fasten them
I didn’t like how the original squash ball feet were installed when using the linear rail mod from KalleKnall, so I sliced off a small portion from the print. With this modification, I was able to slide the feet back 7 mm further than in…
The holes on the Core One L bottom frame are not threaded so a bolt or some other fastener will be required. Uses two M3 bolts per foot. I used M3x10 but M3x8 or maybe even M3x6 might work as well. I left the original holes so it should…
It seems that the electronics box of the MINI+ is just a bit wider than the regular mini. As such, the original model doesn't fit anymore. I simply widened it a bit so it fits again, works great on my model.
I found a lot of different squashballfeet, but I wanted one to match the design of the printer, so I designed one on my own. No tools for mounting needed. I printed it in PETG and starting from 25,2mm I switched to FLEX to make the…
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Prusament : Galaxy Black. PETG 0.15 Infill : 10%. Gyroid. Nozzle : 240c. Bed : 80c. Support : None.
Front Power Switch added to the wider Prusa Core One L Squash Ball Feet Fits all core models Use organic supports everywhere. 3mf contains my support settings, snap off with ease. If you don't know how to wire this, then this mod is not…
A modified version to fit an Ender 3 V2. Modifications from original ( https://www.thingiverse.com/thing:3044013 ): 0.2 mm more space for the bars to fit but still don't slide on their own while printing cutout for psu cover in two feet…
Extended vibration dampening squash ball feet for the Elegoo Centurari Carbon.
Enhance your printing experience with these Low-Profile Squash Ball Dampening Feet specifically designed for the Elegoo Centauri Carbon . As high-speed printing often leads to unwanted desktop resonance, these feet are engineered to…
Sovol SV08 Squash Ball Feet. Using Standard 40mm Squash Balls (double yellow dot). printed with the cup facing upwards on a Sovol SV08, without supports, but added a brim. printed using a 0.4mm nozzle with 0.2mm layer height, 3 layer wall…
Remix of the excellent squash ball feet for the Prusa Core One/+ by @dancan13f . The original creator recommends using squash balls with blue dot as they are the hardest. You will need one M3x6MM screw per foot to fasten it to the Core…
Front power switch installed horizontally for the wider Prusa Core One L Squash ball feet Suitable for all Core models. Heat-resistant adhesive tape: https://www.amazon.de/dp/B0FBFSWYM7?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 Rocker switch…
I simply chopped off the rail portion in TinkerCAD. I then modify each one's base height to perfectly level my paver on a crooked desk.
Squash ball feet for Mercury One.1 that can be swapped onto an already built Mercury One.1 without having to print new electronics enclosure skirt corners. I made these in an attempt to stabilise my printer which is on an uneven surface,…
Vibration dumping squash ball feet's for Ender 3/PRO/V2 printers. Depending on your printer you may wish to print 4 standard feet's or 2 standard and 2 PSU feet. PSU feet has additional recess for PSU cover (tested on Ender 3 V2) Possibly…
A little bit Lighter Faster & Sturdier than the original design : Kudos to the original designer, do not hesitate to grab him a coffee by tipping him : https://www.thingiverse.com/dancan13f/designs I used the 2 yellow-points balls since I…
After converting an MK4S to CoreOne+ , I needed better damping for a narrow shelf setup. Existing mods were either too tall or too wide, so I designed these feet to stay low while still using 8 squash balls for effective isolation. There…
The original version of these feet are fantastic, but the insert portion did not fit in my Elite Suito Legs, so I tweaked the original insert to fit the Suito legs and also adjusted the holes to use M4 heat press threaded inserts for a…
![Squash ball feet for Prusa i3 mk3s (Linear rails friendly) [REMIX]](https://media.printables.com/media/prints/fb24371b-02ec-4bae-bf90-2ebe49c5e3b6/images/11144250_954f1c3d-3ce5-4a04-ab25-24daa4972657_c2501527-5390-4f16-a0e2-f35c21952750/image_1762968730166787.jpg)
