Prusa Core One/+/Gen2 OneL/+ Squash Ball Feet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A new version of squash ball feet specifically designed for the Prusa Core One/+/Gen2 and Core OneL/+
- Rating
- 4.932 / 5
- Likes
- 512
- Downloads
- 1,450
- Makes
- 74
- Views
- 8,628
- Reviews
- 74
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I recommend using balls with blue dot; they are the hardest.
ACCESSORIES
Prusa CoreOne/+/Gen2
You will need 4 M3x6MM screws to fix them to the lower frame; this one has 4 threaded holes in each of the 4 corners as standard.
Prusa CoreOneL/+
You will need 8 M3x10MM screws, 8 M3 washers and 8 M3 lock nuts to fix them to the lower frame.
RELEASE
22/03/2025
New V2 file (PrusaCoreOne_SquashBallFootCorner_V2.stl) :
Better stability ; the balls are more off-center
Better design
26/03/2025
New version of PrusaCoreOne_SquashBallFootCorner_V2.stl file for better position of screws holes.
19/04/2025
New version of PrusaCoreOne_SquashBallFootCorner_V2.stl file :
Better alignment of holes with the threaded drilling of the frame
Enlarged groove for better contact with the frame
Slight reduction in the diameter of the sphere to increase the pressure in the squash ball
22/02/2026
New PrusaCoreOneL_SquashBallFootCorner.stl file for Prusa CoreOneL/+.