1 / 1
Squash Ball Feet | 30mm Extrusion | Prusa MK3S+ and Mini+ — image 1

Squash Ball Feet | 30mm Extrusion | Prusa MK3S+ and Mini+

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Squash Ball Feet for Prusa MK3S+, Only designed what is needed, 21m print time per foot.

Rating
4.667 / 5
Likes
10
Downloads
80
Makes
5
Views
914
Reviews
3

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Remix of Evocato's Prusa Mini Squashball Feet. I printed one and pressed on the top part that goes into extrusion. It broke under some pressure, so I redesigned it. I also hated how thick it was. 

This was a mission to get some squash ball feet with minimum print time and no screws or t-nuts.

I turned off top and bottom layers to show off the honeycomb infill while saving time and plastic. The walls are set at 3, but I think you can print 2. This was to get rid of infill in thin areas.

I also minimized the height of the pieces. I wanted the printer as low as possible without sacrificing strength. I can still tweak it lower, if needed.

Including 3mf file for my settings and will be including the stp file for remixes.