Squash Ball Feet | 30mm Extrusion | Prusa MK3S+ and Mini+
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Squash Ball Feet for Prusa MK3S+, Only designed what is needed, 21m print time per foot.
- Ocena
- 4,667 / 5
- Polubienia
- 10
- Pobrania
- 80
- Wydruki
- 5
- Wyświetlenia
- 914
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Remix of Evocato's Prusa Mini Squashball Feet. I printed one and pressed on the top part that goes into extrusion. It broke under some pressure, so I redesigned it. I also hated how thick it was.
This was a mission to get some squash ball feet with minimum print time and no screws or t-nuts.
I turned off top and bottom layers to show off the honeycomb infill while saving time and plastic. The walls are set at 3, but I think you can print 2. This was to get rid of infill in thin areas.
I also minimized the height of the pieces. I wanted the printer as low as possible without sacrificing strength. I can still tweak it lower, if needed.
Including 3mf file for my settings and will be including the stp file for remixes.