1 / 6
Squash ball feet for QIDI X-Smart 3 against overheating and vibrations — image 1
1 / 6

Squash ball feet for QIDI X-Smart 3 against overheating and vibrations

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Squash ball feet for QIDI X-Smart 3 Printer for better cooling below the printer against overheating and vibrations

Rating
5 / 5
Likes
4
Downloads
20
Makes
1
Views
90
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

These tall squash ball feet make sure there's enough air circulation under the Quidi and therefore enough cooling for it's electonics is possible… when doing high temp Printing, for example PA12 at 280°C Nozzle Temp, and 100°C Bed Temperature, as I like to. With the feet I've done over 4hour long prints with no problems… without the tall feet, the printer would often crash, I guess for overheating.

This Version of the feet also accomodates standard diameter 40mm squash ball for vibration absorbtion. the printer will shake a little, but not problematic. Use balls with little reflection, i.e. the two dot ones…

Tags