1 / 3
Prusa MINI Enclosure Damper Extension (for squash ball feet)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The dampers for the enclosure don't work if you have squash ball feet on your MINI. These 15mm extensions fix that.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 25
- Makes
- 1
- Views
- 199
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you have squash ball feet on your MINI and wish to use the dampers that come with the MINI enclosure, you will need:
- Print 2 of these extensions
- x2 35mm M3 bolts
The extensions and 35mm bolts should be added to the dampers on the Left side of the printer, as shown in the photos. The damper on the right shouldn't need an extension (3rd photo)
I am using these squash ball mounts: https://www.printables.com/model/34936-prusa-mini-squashball-feet-low-profile-noise-reduc