Counting matching models…
You may find two versions of .stl attached: v2 which is higher (about 4 mm regards to v5) and tighter in tolerances, what results some minor problems during mounting into the profiles, v5 which is lower and fits not so tight as v2 (easier…
The original broke near the screw so I beefed it up... 2 versions... Original air flow with slightly thicker walls... Second version has vents crossing the current from the direct openings from the fan. No part fan air directly going…
UPDATE 2022v1 Added cable management parts without angle. Switched from zip-tie to screw. .20 15%
THE PLUS VERSION (i3mk3s+) HERE: https://www.printables.com/cs/model/165818-extruder-dust-filter-prusa-i3mk3s .20 15% Print instructions Category: 3D Printer Parts
Make known fan covers multicolored! Print instructions Category: 3D Printer Accessories
This is not actually a “printable”. It needs to be machined from aluminum, but I thought it is somehow related to 3D printing and Prusa printers. I designed this to optimize the rigidity on of the Y axis on my Prusa i3MK3S+. I wanted to…
Minimalist Allen/hex key holder for ones that came with Prusa. Adapted to work with Skadis pegboard and use minimum space. Print in 0.2 at least. Preferably use brim for the peg. No support is needed. After the print work out the holes…
i3MK3S+ ,or similar, Extruder Indicator in the shape of a clock key. Glue a 8x3mm rare earth magnet on to the bottom. Print upright/vertically with supports everywhere.
Dies ist ein Gehäuse für Standard-Kippschalter. In diesem Fall um mit einem Zweikanalschalter die MMU abzutrennen. Folgender Schalter ist hier verbaut:…
This is my version based on the one by mmontminy here on this site. https://www.prusaprinters.org/prints/3556-mk25s-mk3s-palette-2-extruder-clip This version has a similar slide clip system that mmontminy uses but it screws directly to…
Hi Because I needed a mounting for the teflon tubes on my MMU 2 I made a wall bracket with numbering. You need: Printed parts ;-) 6x screws M3,0x12 and Nuts ALSO INTERESTING Happy printing MFG Chris Follow me on... prusaprinters.org…
Simple Filament Guide comprising of 3 push fit components. Designed to fit either side of the standard Prusa dual filament spool holder. 2 versions of the top with 2 or 4 supports. Bracket - x 2 or x 4 - Printed laying down on its side -…
This is a remix of the cable manager Strain Relief i found here. Its an improoved version since it allows the cable to move vertically and not form an angle. All you need is a 3mm allen screw from the spare ones, preferably 15mm and a 2,5…
I designed this adapter for mounting common 40mm fan on Original Prusa I3MK3s printhead it fit perfectly !!
Inspired by SethBon's LED light bar. I created a longer, simpler version of the LED light bar that replaces the Z Axis Mounts at the top of the printer. Light bar is designed for a 19 x 12 Aluminium channel diffuser. I also made the wire…
Is your i3MK3S+ printer wanting you to unload filament and reload filament in the middle of print for no reason? What's happening here is that the lever arm inside the extruder isn't fully blocking the light inside the sensor when the…
.20 15% Print instructions Category: 3D Printer Accessories
A remix of pilniczek's excellent dust filter, adapted for the MK3S+ Prusa part print settings recommended: .20 layer height 20% infill
This is the Prusa i3MK3S+ y-rod-holder which I modified a tiny bit to make it work with standard M3 nuts. I ordered only the bearing clamps and was able to do the whole y-axis upgrade with this (since I had only normal M3 nuts). Now my…
Compact mount for a disassembled Logitech C920 camera. Made tightly fit the newer model i3MK3S+ x-axis stepper mount/belt tensioner. Optional snap on cover is also included Print instructions Tested on upgraded I3MK3s+ with preset 0.20…
Another simple spool holder to go on a Prusa i3MK3 bar. It can be one sided or two :)
Case for Orange Pi Zero 2 with expansion board and cooling with Noctua NF-A4x10 5V I3MK3S frame mount included Bill of materials: Heatsink for orange Pi M4 nuts- 4pcs - fixing noctua case M4x20 screw - 4pcs - fixing noctua case BLS…
This is an STL of an Prusa i3MK3 (s), perfect suited for the Prusa Slicer as an reference Build Plate as for Example. Or just print your Printer on your Printer for unlimt Printers. For the CAD Model follow this link:…
Hii guys !!! I've created and modelise this Prusa Metal Sheet organizer. I try to stay in Prusa Design style, so if you print it in Orange Prusa, it will stand proudly close to your printer. Normally it's fit perfectly with the metal…
Simple PC4-M10 mounting plate. Holds up to 6 connectors, clips to the existing spool holder vertical arm on the i3MK3S. I needed something simple to guide my filament tubes from my dry box to a usable position above the Prusa print head.…
SUPER LIGHTWEIGHT HEXTRUDER took insipiration from bondtech extruder for prusa.
This is a camera bed mount for Prusa i3MK3S+ or similar with the same bed frame. Push fit onto the bed with adjustable swing arm angle. Includes Raspberry Pi ribbon cable management that allows the ribbon to roll neatly as the bed moves.…
This is a crane I designed for holding a camera/phone on top of a Prusa I3 mk3/s. The files come included with all on one plate(Whole part.stl) Only the crane (Crane.stl) and the angled support. The parts you see for holding the phone are…
Took the original Prusa i3mk3s+ part cooling fan mount and made a better one for Phaetus Dragonfly hotend, now the air will not blow on the silicone sock, but will actually cool the part. It's just a little bit higher.
For the STL Version for the Prusa Slicer as an reference plate follow this Link: https://www.printables.com/de/model/307013-stl-3d-modell-of-the-prusa-i3mk3-for-prusa-slicer
13.12.2019 UPDATE: Door issues Fixed! But still WIP now... BASIC INFO *Multicolor Einsy box without the need to have MMU . You can design your own box & doors patterns or make them changeable... (You do not need to glue it!) ASSEMBLY TIPS…
I've been looking for a cable drag chain for my y axis for a while now. I came across this one and it works like a charm. Thanks to the original designer of this as well as the person taking the time to create the remix. I have included…
.20 15% You need one of the screws left after you build your Prusa. Use additional parts from https://www.thingiverse.com/thing:2194278 or https://www.thingiverse.com/thing:2584426 to cover all your needs. Print instructions Category: 3D…
I rearranged/repositioned and rescaled the model to fit to my Prusa Slicer. - - - so now it fits to the printbed in the slicer previews - you have only to load the file into your settings and have no further circumstances - - -…
Simple bracket to support a cheap light bar above the print bed on a Prusa i3MK3s+. I'm sure it'll work on other Prusa models which have the hexagon perforation on the 'Z axis top parts'. Check the clearance between the extruder assembly…
.20 15% You can use only covers without y-rod-higher.stl, but It'll cause noise. With y-rod-higher.stl, you will lose 1mm height from your print area. It is not a big deal for now. I'll solve this later with additional upgrade parts for…
I liked the adjustable thermometer mount so much that I wanted it on my i3MK3 frame as well. And here it is. Once to clamp on the upper frame and once for the side. I bought the thermometers in the pictures on Amazon. (see link - no…
This is a camera X-Axis Arm Mount for Prusa i3MK3S+ or similar with the same X-Axis Arm. Adjustable swing arm angle. The RPi camera case is for a v2 but there is a Night Vision Camera case and cradle that I have also published. Face Plate…
I have my printer in the garage. When doing mods/maintenance and such, I carry it into the house. Don't like the feel of the bare frame, so created a comfortable handle that slots on. I present Prusa Carry. Included a mounting hole where…
For Palette 3 Pro, I propose you a clip for Bondetch BMG installed on a Prusa i3MK3S+ Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: No Resolution: 0.16 Infill: 100% Filament: Prusa Prusament PETG Jet Black…
This print will hold a Ikea Omlopp LED to your Prusa (i3Mk3s), the LED's are 24v, so you can connect them directly to the power supply of the printer. Printer ON = LED's ON They fit like a glove. ClickN'play Incl. Fusion360 file No…
I hold mine together with small rubber bands. This is necessary or else the wobble x can bounce and create new artifacts. The x axis is flipped to allow the top of the extruder to still calibrate its position by running to the end of its…
After Noticing that my extruder motor was getting really hot during prints, i decided to do some research and see if there is something i can do about it. I found an extruder cooler fitting but was not of my taste. Since i am a StarWars…
There are many reasons to relocate your PSU to a different spot. Most of them are thermal reasons inside an enclosure or maybe esthetic ones. The space freed up by the PSU can be filled with this nice brace which also guarantees frame…
print with supports
Yet another take on a raspberry pi mount for the prusa I3Mk3 printer. This one is open framed for cooling and will support the POE board. It requires two M3 screws for attaching the mount to the printer and two or more for attaching the…
.20 15% Print instructions Category: 3D Printer Parts
Mini model 3d tiskárny original Prusa i3mk3s+.
Pro všechny, komu se při sestavování jednotky MMU2S odštípne více materiálu z dvířek u desky EINSY než by chtěl, dávám k dispozici tento remix originálního dílu R1 od i3 MK3S+. Můj průměr svazku kabelů od MMU je 7mm . Jestli už máte MMU…
Remix of @Oswald 's squash ball feet V5 (slimmer one). This design changes the look to be hex and more chonky. Used parts 4x PERFLY two yellow dot squash balls from Decathlon (one for each leg) My print settings PETG 0.4 nozzle 0.2 layer…
I remixed the linked design, adding holes to allow for the tray to be secured to the printer frame using M3 x 8 screws and a capture nut like this one . I removed the angled corners and the slots for the dividers to better suite my…
I rearranged/repositioned and rescaled the model to fit to my Prusa Slicer. - - - so now it fits to the printbed in the slicer previews - you have only to load the file into your settings and have no further circumstances - - -…
eine etwas handlichere Version als Ersatz für den originalen Dreh-Drück Steller ------------------------------------------------------------------------------------------- a little handier control as replacement for the original…
I really liked Derek's model of this filament guide, but it wouldn't clip onto my MK3S with a stock 6.35mm thick frame. I just added a rectangle negative space modifier into the slicer with slightly bigger than the exact dimensions of the…
This was printed at 40% place it on the PSU and you are done
This is my best nozzle cam so far. It uses the smallest cam available and despite the good and magnifying videoimage quality it is surprisingly affordable (under 20€). I built a mount to attach a magnifying USB nozzle cam from a cheap…
This "Piggy back" mount allows you to attach a Pi Zero w2 enclosed in a Flirc aluminium case directly on to your Prusa mk3s+ Einsy cover. The Pi is connected to the Einsy board with 4 wires (+5, 0, Tx, Rx). The mount attaches to the Stock…
This model is just right to fill the empty front area when the LCD is mounted outside enclosure using. If the handle is not used, the LCD can be installed as usual. Choose of the three styles. Carry handle alone Front cover with LCD Front…
This is a pretty simple clip design which helps LED lights not fall off the back of your prusa. They clip on pretty easily and your print settings don't really matter when printing them. Have Fun!
this was a quick mod based on made_for_making's C920 mount. It uses 2x 8-32 screws to mount the Sentry.
Summary I found that my Raspberry Pi 4 was overheating when running Octoprint, so I decided to buy a heatsink to solve the problem. The one I bought is really good due to its massive case. However none of the existing cases for the Prusa…
I needed a filament holder for my dry box on a side shelf. I made one and have been using this filament guide since 5 months. Maybe I can modify Frameclip if it gets loose in future. Required for assembly: 2x 608 ball bearings 2x…
My IR sensor wouldn't fit in the compartment, so I used .f3d file that TheGrantz3D generously provided to increase space a bit (+3mm length, +0.6mm height). Clip is unchanged
I couldn't find a raspberry pi holder / octoprint server that i liked, so i designed my own. [Project video here](https://www.youtube.com/watch?v=80kXBwF7VbI) (It really helps my channel if you engage with the video, im also more…
I had some issues with taller prints using my old spool holder so I made this extended one. I used the hex pegs to align and give strength then glued it all together with 3D Gloop
I like monitoring my 3D prints with Webcams (nozzle-cam) etc. I found this tiny webcam that has despite of its small size a high quality Sony video chip built in. I chose the 1080p 30fps model with autofocus.…
Removing the filament stuck on a hotend can be inefficient when done in a cramped position. This design allows the hotend to be detached and worked on in a more accessible position. ※Other things needed besides the printed product.…
PLA print 0.2mm, heating plate supported
Overview For a video tour of this tower setup, please visit this reddit post . In this video I explain how this quick-release system works along with some of the other upgrades that I have made for my Prusa i3MK3S+ with MMU3! (: File…
This design was previously made for the Starlex 22 Twist, but is completely compatible with the New all metal hot end, zero tool, quick change over Starlex DHB heat set from Swiss3Dc.com Nozzle to bed height is similar to your actual…
Der Schalter zum Trennen der MMU-Spannung ist im Original an der Rückseite des Druckerrahmens senkrecht montiert. Nun umfasst der Behälter den Rahmen. Normale Befestigung mit 2x M3-Schrauben mit Muttern. Rechts ist darauf zu achten, dass…
Update 29.05.2023 . I do not use this design anymore because I made a superior model shortly ago. I recommend not using this model any longer and suggest you use my best nozzle cam (and still the most affordable solution) . Problems with…
adattatore/supporto per webcam Samzuy per modello “z axis china mount Prusa I3MK3”. vite per fissaggio adattatore: m3x30 + nuts m3 vite per fissaggio webcam: m2x8 stampato in PETG Infill al 30% senza bisogno di supporti Altezza laser 0,2
Another way of adding led lighting to Prusa i3MK3S. Just LEDs, 2 clamps, a dimmer and a DC plug. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 25 Filament: Generic PLA Black Category:…
A soap dish modeled after the Prusa i3MK3S. Holes in soap rest (aka heat bed) drain into hollow Y-axis rods and out the back. I sliced this for use with the MMU2S but a single color print will work as well (just not as pretty). AMF and…
Overview For a video tour of this tower setup, please visit this reddit post . In this video I explain how this quick-release system works along with some of the other upgrades that I have made for my Prusa i3MK3S+ with MMU3! (: The main…
DROP A LIKE and Hold your Allen Key near the lcd of your awesome prusa printer
I've been looking for a cable drag chain for my y axis for a while now. I came across this one and it works like a charm. Thanks to the original designer of this as well as the person taking the time to create the remix. I have included…
Just clip the parts together. You can plug it into the aluminum profile of the MK3. The stiffness of the damper can be adjusted in the slicer. Just change the height of the parts so its thicker.
